Effect of the ionic liquid [bmim]Cl and high pressure on the activity of cellulase

The effect of the ionic liquid 1-butyl-3-methylimidazolium chloride ([bmim]Cl) and of high pressure on the activity of cellulase from Aspergillus niger were studied separately and in combination. The enzyme activity decreased with increasing concentrations of [bmim]Cl, reaching 50% the value in aqueous buffer with 20% [bmim]Cl. However, when the enzyme is held in 10% [bmim]Cl and is then assayed in 1% [bmim]Cl, it showed only 8% reduction of activity. These results can be explained by the fact that the activity of the enzyme in [bmim]Cl is linearly correlated with the decrease of the thermodynamic water activity (aw). Under pressure the enzyme activity varied from less 60% (at 200MPa) to equal (at 400 MPa), compared to atmospheric pressure. In 10% [bmim]Cl under pressure, cellulase activity is improved compared to atmospheric pressure, varying from equal (at 600 MPa) to 1.7-fold higher (at 100 MPa). This opens the possibility to improve cellulase activity in ionic liquids, and possibly of other enzymes, by carrying out the reaction under pressure

Electrospun nanosized cellulose fibers using ionic liquids at room temperature

Aiming at replacing the noxious solvents commonly employed, ionic-liquid-based solvents have been recently explored as novel non-volatile and non-flammable media for the electrospinning of polymers. In this work, nanosized and biodegradable cellulose fibers were obtained by electrospinning at room temperature using a pure ionic liquid or a binary mixture of two selected ionic liquids. The electrospinning of 8 wt% cellulose in 1-ethyl-3-methylimidazolium acetate medium (a low viscosity and room temperature ionic liquid capable of efficiently dissolving cellulose) showed to produce electrospun fibers with average diameters within (470 ± 110) nm. With the goal of tailoring the surface tension of the spinning dope, a surface active ionic liquid was further added in a 0.10 : 0.90 mole fraction ratio. Electrospun cellulose fibers from the binary mixture composed of 1-ethyl-3-methylimidazolium acetate and 1-decyl-3-methylimidazolium chloride ionic liquids presented average diameters within (120 ± 55) nm. Scanning electron microscopy, X-ray diffraction analysis, nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and thermogravimetric assays were used as core methods to evaluate the structural integrity, morphology and crystallinity of the raw, electrospun, and regenerated samples of cellulose. Moreover, the photoluminescence spectra of both raw and electrospun fibers were acquired, and compared, indicating that the cellulose emitting centers are not affected by the dissolution of cellulose in ionic liquids. Finally, the use of non-volatile solvents in electrospinning coupled to a water coagulation bath allows the recovery of the ionic fluid, and represents a step forward into the search of environmentally friendly alternatives to the conventional approaches

LCST-phase behavior and complexation with water of an ionic liquid incorporating the 5-phenyltetrazolate anion

The use of 5-phenyltetrazole, a bioisostere of benzoic acid, as an anion source to prepare an ionic liquid is described for the first time. Tetrabutylphosphonium 5-phenyltetrazolate undergoes phase separation from water with lower critical solution temperature phase behavior, in contrast to completely water miscibletetrabutylphosphonium benzoate, and also exhibits strong complexation with water with both eutectic and peritectic behavior that has not previously been observed in ionic liquid + water systems. The anhydrous and trihydrate salts were isolated and characterized by single crystal X-ray diffraction

Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents

1-Ethyl-3-methylimidazolium acetate ([C2C1Im][OAc]) and 1-butyl-3-methylimidazolium acetate ([C4C1Im][OAc]) have been used as solvents for the dissolution and ink-jet printing of cellulose from 1.0 to 4.8 wt%, mixed with the co-solvents 1-butanol and DMSO. 1-Butanol and DMSO were used as rheological modifiers to ensure consistent printing, with DMSO in the range of 41–47 wt% producing samples within the printable range of a DIMATIX print-head used (printability parameter < 10) at 55 °C, whilst maintaining cellulose solubility. Regeneration of cellulose from printed samples using water was demonstrated, with the resulting structural changes to the cellulose sample assessed by scanning electron microscopy (SEM) and white light interferometry (WLI). These results indicate the potential of biorenewable materials to be used in the 3D additive manufacture process to generate single-component and composite materials

Application of Ionic Liquids in the Microwave-Assisted Extraction of Proanthocyanidins from Larix gmelini Bark

Ionic liquid based, microwave-assisted extraction (ILMAE) was successfully applied to the extraction of proanthocyanidins from Larix gmelini bark. In this work, in order to evaluate the performance of ionic liquids in the microwave-assisted extraction process, a series of 1-alkyl-3-methylimidazolium ionic liquids with different cations and anions were evaluated for extraction yield, and 1-butyl-3-methylimidazolium bromide was selected as the optimal solvent. In addition, the ILMAE procedure for the proanthocyanidins was optimized and compared with other conventional extraction techniques. Under the optimized conditions, satisfactory extraction yield of the proanthocyanidins was obtained. Relative to other methods, the proposed approach provided higher extraction yield and lower energy consumption. The Larix gmelini bark samples before and after extraction were analyzed by Thermal gravimetric analysis, Fourier-transform infrared spectroscopy and characterized by scanning electron microscopy. The results showed that the ILMAE method is a simple and efficient technique for sample preparation

Surface hydrophobization of bacterial and vegetable cellulose fibers using ionic liquids as solvent media and catalysts

The surface hydrophobization through heterogeneous chemical modification of bacterial (and vegetable) cellulose fibers with several anhydrides (acetic, butyric, hexanoic and alkenyl succinic anhydrides) and hexanoyl chloride suspended in an ionic liquid, tetradecyltrihexylphosphonium bis(trifluoromethylsulfonyl) imide, [TDTHP][NTf(2)], was studied. Furthermore, in the reaction with hexanoyl chloride, another ionic liquid, N-hexyl-4-(dimethylamino)pyridinium bis(trifluoromethylsulfonyl) imide, [C(6)N(CH(3))(2)py][NTf(2)], was used instead of common organic bases as catalyst and to trap the released HCl. The analysis of the ensuing modified fibers by FTIR, XRD and SEM clearly showed that the esterification reactions occurred essentially at the fibers' outmost layers, not affecting their ultrastructure. The degree of substitution (DS) of the ensuing esterified fibers ranged from less than 0.002 to 0.41; and in all instances, the fibers' surface acquired a high hydrophobicity. This novel approach constitutes an important strategy in the preparation of modified fibers under greener conditions relaying in the use of non-volatile solvents.FCT - SFRH/BD/72830/2010SFRH/BPD/41781/2007PTDC/QUI/68472/2006PTDC/QUI/72903/200