High frequency mechanical excitation of a silicon nanostring with piezoelectric aluminum nitride layers

A strong trend for quantum based technologies and applications follows the avenue of combining different platforms to exploit their complementary technological and functional advantages. Micro and nano-mechanical devices are particularly suitable for hybrid integration due to the easiness of fabrication at multi-scales and their pervasive coupling with electrons and photons. Here, we report on a nanomechanical technological platform where a silicon chip is combined with an aluminum nitride layer. Exploiting the AlN piezoelectricity, Surface Acoustic Waves are injected in the Si layer where the material has been localy patterned and etched to form a suspended nanostring. Characterizing the nanostring vertical displacement induced by the SAW, we found an external excitation peak efficiency in excess of 500 pm/V at 1 GHz mechanical frequency. Exploiting the long term expertise in silicon photonic and electronic devices as well as the SAW robustness and versatility, our technological platform represents a strong candidate for hybrid quantum systems

Optical properties of Si/Si0.87Ge0.13 multiple quantum well wires

Nanometer-scale wires cut into a Si/Si0.87Ge0.13 multiple quantum well structure were fabricated and characterized by using photoluminescence and photoreflectance at temperatures between 4 and 20 K. It was found that, in addition to a low-energy broadband emission at around 0.8 eV and other features normally observable in photoluminescence measurements, fabrication process induced strain relaxation and enhanced electron-hole droplets emission together with a new feature at 1.131 eV at 4 K were observed. The latter was further identified as a transition related to impurities located at the Si/Si0.87Ge0.13 heterointerfaces

Epitaxial growth of visible to infra-red transparent conducting In2O3 nanodot dispersions and reversible charge storage as a Li-ion battery anode

peer-reviewedUnique bimodal distributions of single crystal epitaxially grown In2O3 nanodots on silicon are shown to have excellent IR transparency greater than 87% at IR wavelengths up to 4 mu m without sacrificing transparency in the visible region. These broadband antireflective nanodot dispersions are grown using a two-step metal deposition and oxidation by molecular beam epitaxy, and backscattered diffraction confirms a dominant (111) surface orientation. We detail the growth of a bimodal size distribution that facilitates good surface coverage (80%) while allowing a significant reduction in In2O3 refractive index. This unique dispersion offers excellent surface coverage and three-dimensional volumetric expansion compared to a thin film, and a step reduction in refractive index compared to bulk active materials or randomly porous composites, to more closely match the refractive index of an electrolyte, improving transparency. The (111) surface orientation of the nanodots, when fully ripened, allows minimum lattice mismatch strain between the In2O3 and the Si surface. This helps to circumvent potential interfacial weakening caused by volume contraction due to electrochemical reduction to lithium, or expansion during lithiation. Cycling under potentiodynamic conditions shows that the transparent anode of nanodots reversibly alloys lithium with good Coulombic efficiency, buffered by co-insertion into the silicon substrate. These properties could potentially lead to further development of similarly controlled dispersions of a range of other active materials to give transparent battery electrodes or materials capable of non-destructive in situ spectroscopic characterization during charging and discharging.ACCEPTEDpeer-reviewe

Hydrology and water quality of a field and riparian buffer adjacent to a mangrove wetland in Jobos Bay watershed, Puerto Rico

Agriculture in coastal areas of Puerto Rico is often adjacent to or near mangrove wetlands. Riparian buffers, while they may also be wetlands, can be used to protect mangrove wetlands from agricultural inputs of sediment, nutrients, and pesticides. We used simulation models and field data to estimate the water, nitrogen, and phosphorus inputs from an agricultural field and riparian buffer to a mangrove wetland in Jobos Bay watershed, Puerto Rico. We used the Agricultural Policy/Environmental eXtender (APEX) and the Riparian Ecosystem Management Model (REMM) models sequentially to simulate the hydrology and water quality of the agricultural fields and an adjacent riparian buffer, respectively. Depth to the water table surface was measured monthly at numerous sites in both field and riparian areas and were used with recording well data from outside the field to estimate daily water table depths in the field and riparian buffer and to calibrate field-scale hydrologic processes. Calibration and validation of the models were successful for the riparian buffer and in three of four field quadrants. In these areas the average simulated depth to water table for the field and the riparian buffer were within ±7% of field estimated water table depths. Over the 3-year study period, the riparian buffer represented by REMM reduced agricultural loadings to the mangrove wetland by 24% for sediment yield, and about 30% for total nitrogen and phosphorus. Simulations indicated that tropical storms and hurricanes played an important role in water and nutrient transport on this site contributing at least 63% of total sediment and nutrient loads

Surface-directed dewetting of a block copolymer for fabricating highly uniform nanostructured microdroplets and concentric nanorings

Through a combination of nanoimprint lithography and block copolymer self-assembly, a highly regular dewetting process of a symmetric diblock copolymer occurs whereby the hierarchal formation of microdroplets and concentric nanorings emerges. The process is driven by the unique chemical properties and geometrical layout of the underlying patterned silsesquioxane micrometer-sized templates. Given the presence of nonpreferential substrate−polymer interactions, directed dewetting was utilized to produce uniform arrays of microsized droplets of microphase separated polystyrene-block-poly(methyl methylacrylate) (PS-b-PMMA), following thermal annealing at 180 °C. Microdroplets with diameters greater than 400 nm exhibited a hexagonal close-packed arrangement of nanodots on the surface with polydomain ordering. At the droplet periphery, the polydomain ordering was severely disrupted because of a higher in-plane radius of curvature. By reducing the droplet size, the in-plane radius of curvature of the microdroplet becomes significant and the PMMA cylinders adopt parallel structures in this confined geometry. Continuous scaling of the droplet results in the generation of isolated, freestanding, self-aligned, and self-supported oblique nanorings (long axis ∼250−350 nm), which form as interstitial droplets between the larger microdroplets. Optical and magnetic-based nanostructures may benefit from such hierarchal organization and self-supporting/aligned nanoring templates by combining more than one lithography technique with different resolution capabilities

Polarized point sources in the LOFAR Two-meter Sky Survey: A preliminary catalog

The polarization properties of radio sources at very low frequencies (h45m–15h30m right ascension, 45°–57° declination, 570 square degrees). We have produced a catalog of 92 polarized radio sources at 150 MHz at 4.′3 resolution and 1 mJy rms sensitivity, which is the largest catalog of polarized sources at such low frequencies. We estimate a lower limit to the polarized source surface density at 150 MHz, with our resolution and sensitivity, of 1 source per 6.2 square degrees. We find that our Faraday depth measurements are in agreement with previous measurements and have significantly smaller errors. Most of our sources show significant depolarization compared to 1.4 GHz, but there is a small population of sources with low depolarization indicating that their polarized emission is highly localized in Faraday depth. We predict that an extension of this work to the full LOTSS data would detect at least 3400 polarized sources using the same methods, and probably considerably more with improved data processing

Games with capacity manipulation: Incentives and Nash equilibria

Studying the interactions between preference and capacity manipulation in matching markets, we prove that acyclicity is a necessary and sufficient condition that guarantees the stability of a Nash equilibrium and the strategy-proofness of truthful capacity revelation under the hospital-optimal and intern-optimal stable rules. We then introduce generalized games of manipulation in which hospitals move first and state their capacities, and interns are subsequently assigned to hospitals using a sequential mechanism. In this setting, we first consider stable revelation mechanisms and introduce conditions guaranteeing the stability of the outcome. Next, we prove that every stable non-revelation mechanism leads to unstable allocations, unless restrictions on the preferences of the agents are introduced

Slow Spin Relaxation in Two-Dimensional Electron Systems with Antidots

We report a Monte Carlo investigation of the effect of a lattice of antidots on spin relaxation in twodimensional electron systems. The spin relaxation time is calculated as a function of geometrical parameters describing the antidot lattice, namely, the antidot radius and the distance between their centers. It is shown that spin polarization relaxation can be efficiently suppressed by the chaotic spatial motion due to the antidot lattice. This phenomenon offers a new approach to spin coherence manipulation in spintronics devices.Comment: submitted to Phys. Rev.

MscS-like mechanosensitive channels in plants and microbes

The challenge of osmotic stress is something all living organisms must face as a result of environmental dynamics. Over the past three decades, innovative research and cooperation across disciplines have irrefutably established that cells utilize mechanically gated ion channels to release osmolytes and prevent cell lysis during hypoosmotic stress. Early electrophysiological analysis of the inner membrane of Escherichia coli identified the presence of three distinct mechanosensitive activities. The subsequent discoveries of the genes responsible for two of these activities, the mechanosensitive channels of large (MscL) and small (MscS) conductance, led to the identification of two diverse families of mechanosensitive channels. The latter of these two families, the MscS family, consists of members from bacteria, archaea, fungi, and plants. Genetic and electrophysiological analysis of these family members has provided insight into how organisms use mechanosensitive channels for osmotic regulation in response to changing environmental and developmental circumstances. Furthermore, determining the crystal structure of E. coli MscS and several homologues in several conformational states has contributed to our understanding of the gating mechanisms of these channels. Here we summarize our current knowledge of MscS homologues from all three domains of life and address their structure, proposed physiological functions, electrophysiological behaviors, and topological diversity

First Atmospheric Results from InSight APSS

NASA’s Mars InSight Spacecraft landed on Nov 26, 2018 (Ls=295°) in Elysium Planitia (~4.5°N, 136°E). InSight’s main scientific purpose is to investigate the interior structure and heat flux from Mars, but it is also equipped with instrumentation that can serve as a very capable meteorological station. To remove unwanted environmental noise from the seis- mic signals, InSight carries a very precise pressure sensor (PS) and the first magnetometer (IFG) to the surface of Mars. Additionally, to aid in removing the atmospheric pressure-induced seismic noise, and to identify periods when wind-induced seismic noise may reduce sensitivity, InSight also carries a pair of Wind and Air temperature sensors (TWINS). These three sensors comprise the Auxiliary Payload Sensor Suite (APSS) [1]. Complementing this are a radiometer in the HP3 suite to measure surface radiance, the seismic measurements of SEIS which can record interesting atmospheric phenomena, and the InSight cameras to image clouds and dust devils and estimate atmospheric opacity from dust or clouds. The Lander also carried accelerometers that can be used to reconstruct the at- mospheric structure during descent. We will discuss results drawn from atmospheric measurements on board InSight from the first months of operation, high- lighting the new perspectives permitted by the novel high-frequency, and continuous nature of the InSight data acquisition. Details on pre-landing scientific perspectives for atmospheric science with InSight are found in [2]