Contrasting carbonate depositional systems for Pliocene cool-water limestones cropping out in central Hawke's Bay, New Zealand

Pliocene limestone formations in central Hawke's Bay (eastern North Island, New Zealand) accumulated on and near the margins of a narrow forearc basin seaway within the convergent Australia/Pacific plate boundary zone. The active tectonic setting and varied paleogeographic features of the limestone units investigated, in association with probable glacioeustatic sea-level fluctuations, resulted in complex stratigraphic architectures and contrasting types of carbonate accumulation on either side of the seaway. Here, we recognise recurring patterns of sedimentary facies, and sequences and systems tracts bounded by key physical surfaces within the limestone sheets. The facies types range from Bioclastic (B) to Siliciclastic (S) end-members via Mixed (M) carbonate-siliciclastic deposits. Skeletal components are typical cool-water associations dominated by epifaunal calcitic bivalves, bryozoans, and especially barnacles. Siliciclastic contents vary from one formation to another, and highlight siliciclastic-rich limestone units in the western ranges versus siliciclastic-poor limestone units in the eastern coastal hills. Heterogeneities in facies types, stratal patterns, and also in diagenetic pathways between eastern and western limestone units are considered to originate in the coeval occurrence in different parts of the forearc basin of two main morphodynamic carbonate systems over time

Nearly universal crossing point of the specific heat curves of Hubbard models

A nearly universal feature of the specific heat curves C(T,U) vs. T for different U of a general class of Hubbard models is observed. That is, the value C_+ of the specific heat curves at their high-temperature crossing point T_+ is almost independent of lattice structure and spatial dimension d, with C_+/k_B \approx 0.34. This surprising feature is explained within second order perturbation theory in U by identifying two small parameters controlling the value of C_+: the integral over the deviation of the density of states N(\epsilon) from a constant value, characterized by \delta N=\int d\epsilon |N(\epsilon)-1/2|, and the inverse dimension, 1/d.Comment: Revtex, 9 pages, 6 figure

Scaling of magnetic fluctuations near a quantum phase transition

We use inelastic neutron scattering to measure the magnetic fluctuations in a single crystal of the heavy fermion alloy CeCu_5.9Au_0.1 close to the antiferromagnetic quantum critical point. The energy and temperature-dependent spectra obey (E/T) scaling at Q near (1,0,0). The neutron data and earlier bulk susceptibility are consistent with the form 1/X ~ f(Q)+(-iE+bT)^a, with an anomalous exponent a=0.8. We confirm the earlier observation of quasi-low dimensionality and show how both the magnetic fluctuations and the thermodynamics can be understood in terms of a quantum Lifshitz point.Comment: Latex file with two postscript figure

Nanoparticle Release from Thermal Decomposition of Polymer Nanocomposites and the Biological Potential of the Emissions

Adding nanoparticles to polymers improves the properties significantly, such as UV resistance or even electrical conductivity. The growing use of these composite materials leads to a higher amount in disposals eventually. Within the circular economy there are two ways of handling: the recycling by shredding and reuse and the thermal treatment by combustion in municipal waste incinerators. In both cases there is nearly no information about the behavior of the nanoparticles and possible release scenarios. In this study a laboratory burner is used as a flexible set up to incinerate the polymer nanocomposites. The flue gas containing a complex mixture of combustion gases and particles is characterized by different particle analysers, PAH analysis, VOC analysis and TEM. The biological impact is studied by using a VITROCELL Automated ALI exposure station. Hereby, cells of the adenocarcino cell line A549 as well as a reconstituted bronchial epithelium (MucilAir, Epithelix) were exposed for 4 hours to the aerosols emitted from the combustion process. Within the exposure process, cells were exposed to the native aerosol, an aerosol under conditions to increase particle deposition via high voltage as well as a filtered aerosol, and therefore the sole gaseous phase. Furthermore, each exposure included a so-called clean air control, where cells where exposed to filtered air. The exposure was followed by a 21 h post-incubation before the cytotoxic effects were determined via LDH-release. To reveal if possible adverse effects are caused by the used nano-scaled filling material, all used nanomaterials did also undergo the same combustion process as a single material. Cytotoxicity studies showed no increased cytotoxic effects after the combustion of the sole nano-scaled filling materials. However, combustion of PE containing materials resulted in an enhanced LDH-release, and therefore cytotoxicity, in both cell culture models. Since no difference between exposures of unfiltered and filtered aerosols was apparent, it suggested that the observed cytotoxicity is due to the combustion induced gaseous phase

Pain in Multiple System Atrophy a Systematic Review and Meta-Analysis

Background: Individuals with multiple system atrophy (MSA) often complain about pain, nonetheless this remains a poorly investigated non-motor feature of MSA. Objectives: Here, we aimed at assessing the prevalence, characteristics, and risk factors for pain in individuals with MSA. Methods: Following the Preferred Reporting Items for Systematic Reviews and Meta-Analyzes (PRISMA) guidelines, we systematically screened the PubMED, Cochrane, and Web of Science databases for papers published in English until September 30, 2022, combining the following keywords: “pain,” “multiple system atrophy,” “MSA,” “olivopontocerebellar atrophy,” “OPCA,” “striatonigral degeneration,” “SND,” “Shy Drager,” and “atypical parkinsonism.”. Results: The search identified 700 records. Sixteen studies provided information on pain prevalence in cohorts of MSA individuals and were included in a qualitative assessment based on the Quality Assessment of Diagnostic Accuracy Studies (QUADAS) tool. Thirteen studies (11 cross-sectional, two longitudinal) scored ≥14 points on QUADAS assessment and were included in a quantitative analysis, pooling data from 1236 MSA individuals. The resulting pooled prevalence of pain in MSA was 67% (95% confidence intervals [CI] = 57%–75%), and significantly higher in individuals with MSA of parkinsonian rather than cerebellar type (76% [95% CI = 63%–87%] vs. 45% [95% CI = 33%–57%], P = 0.001). Pain assessment tools and collected information were highly heterogeneous across studies. Two studies reported pain treatment strategies and found that only every second person with MSA complaining about pain had received targeted treatment. Conclusions: We found that pain is a frequent, but still under-recognized and undertreated feature of MSA. Further research is needed to improve pain detection and treatment in MSA

Nitric acid trihydrate nucleation and denitrification in the Arctic stratosphere

Nitric acid trihydrate (NAT) particles in the polar stratosphere have been shown to be responsible for vertical redistribution of reactive nitrogen (NO_y). Recent observations by Cloud–Aerosol Lidar with Orthogonal Polarization (CALIOP) aboard the CALIPSO satellite have been explained in terms of heterogeneous nucleation of NAT on foreign nuclei, revealing this to be an important formation pathway for the NAT particles. In state of the art global- or regional-scale models, heterogeneous NAT nucleation is currently simulated in a very coarse manner using a constant, saturation-independent nucleation rate. Here we present first simulations for the Arctic winter 2009/2010 applying a new saturation-dependent parametrisation of heterogeneous NAT nucleation rates within the Chemical Lagrangian Model of the Stratosphere (CLaMS). The simulation shows good agreement of chemical trace species with in situ and remote sensing observations. The simulated polar stratospheric cloud (PSC) optical properties agree much better with CALIOP observations than those simulated with a constant nucleation rate model. A comparison of the simulated particle size distributions with observations made using the Forward Scattering Spectrometer Probe (FSSP) aboard the high altitude research aircraft Geophysica, shows that the model reproduces the observed size distribution, except for the very largest particles above 15 μm diameter. The vertical NO_y redistribution caused by the sedimentation of the NAT particles, in particular the denitrification and nitrification signals observed by the ACE-FTS satellite instrument and the in situ SIOUX instrument aboard the Geophysica, are reproduced by the improved model, and a small improvement with respect to the constant nucleation rate model is found

Megabank found? Flanks record sea level

On Leg 101, the first international voyage for the Ocean Drilling Program, the deep-sea drilling ship JOIOES Resolution (SEDCO/BP 471) left Miami, Fla., on Jan. 31 to investigate the geology of the Bahamas. (Leg 100 tested the Resolution's readiness. See July Geotimes.) Before returning to Miami on March 14, the crew had drilled 19 holes al 11 sites and recovered 46.2% of the cored section (about 1.5 of 3.1 km cored). The scientific party wanted to test conflicting hypotheses about the development of the modern shallow water carbonate banks and intervening deep -water throughs in the Bahamas, and to study the growth patterns of carbonate slopes and their response to sea-level fluctuations. Those objectives (the 'deep ' and the 'shallow') were selected beause recent advances in interpreting the micropaleontology of shallow-water carbonate platforms, coupled with data from previous sedimentological investigations and regional and site-specific seismic surveys, now permit consistent stratigraphic comparisons in the Bahamas

The Hubbard model within the equations of motion approach

The Hubbard model has a special role in Condensed Matter Theory as it is considered as the simplest Hamiltonian model one can write in order to describe anomalous physical properties of some class of real materials. Unfortunately, this model is not exactly solved except for some limits and therefore one should resort to analytical methods, like the Equations of Motion Approach, or to numerical techniques in order to attain a description of its relevant features in the whole range of physical parameters (interaction, filling and temperature). In this manuscript, the Composite Operator Method, which exploits the above mentioned analytical technique, is presented and systematically applied in order to get information about the behavior of all relevant properties of the model (local, thermodynamic, single- and two- particle ones) in comparison with many other analytical techniques, the above cited known limits and numerical simulations. Within this approach, the Hubbard model is shown to be also capable to describe some anomalous behaviors of the cuprate superconductors.Comment: 232 pages, more than 300 figures, more than 500 reference

Standalone vertex finding in the ATLAS muon spectrometer

A dedicated reconstruction algorithm to find decay vertices in the ATLAS muon spectrometer is presented. The algorithm searches the region just upstream of or inside the muon spectrometer volume for multi-particle vertices that originate from the decay of particles with long decay paths. The performance of the algorithm is evaluated using both a sample of simulated Higgs boson events, in which the Higgs boson decays to long-lived neutral particles that in turn decay to bbar b final states, and pp collision data at √s = 7 TeV collected with the ATLAS detector at the LHC during 2011