126 research outputs found
Brittle initiation of dissolution–precipitation creep in plagioclase-rich rocks: insights from the Bergen arcs, Norway
The initiation of ductile shear zones commonly occurs spatially associated with fluid-rock reactions along brittle precursors. In many cases the relative timing of fracturing, fluid infiltration, reaction, and recrystallisation is unclear, making it difficult to disentangle mechanisms of shear zone initiation from subsequent deformation and recrystallisation. Here we present the study of the transition from a dry plagioclase-diopside-garnet-scapolite host granulite-facies lithology to (1) a low strain amphibolite-facies rock, and (2) a transition from low strain to high strain amphibolite-facies lithologies. Hydration of the granulite-facies precursor at amphibolite-facies conditions produces an assemblage comprised dominantly of plagioclase-amphibole-zoisite-clinozoisite-kyanite-scapolite-quartz. Detailed study of plagioclase chemistry and microstructures across these two transitions using Electron Backscatter Diffraction (EBSD) and Wavelength Dispersive Spectrometry (WDS) allows us to assess the degree of coupling between deformation and fluid-rock reaction across the outcrop. Plagioclase behaves dominantly in a brittle manner at the hydration interface and so the initial weakening of the rock is attributed to grain size reduction caused by fracture damage and fluid infiltration at amphibolite-facies conditions. Extensive fracturing-induced grain size reduction locally increases permeability and allows for continuing plagioclase and secondary mineral growth during shear. Based on plagioclase microstructures, such as, an inherited but dispersed crystallographic preferred orientation (CPO), truncation of chemical zoning, and the dominance of fine (5–150 µm), slightly elongate, polygonal grains we conclude that deformation is dominantly facilitated by dissolution–precipitation creep assisted by grain boundary sliding in the shear zone
Compositional boundary layers trigger liquid unmixing in a basaltic crystal mush
Abstract: The separation of immiscible liquids has significant implications for magma evolution and the formation of magmatic ore deposits. We combine high-resolution imaging and electron probe microanalysis with the first use of atom probe tomography on tholeiitic basaltic glass from Hawaii, the Snake River Plain, and Iceland, to investigate the onset of unmixing of basaltic liquids into Fe-rich and Si-rich conjugates. We examine the relationships between unmixing and crystal growth, and the evolution of a nanoemulsion in a crystal mush. We identify the previously unrecognised role played by compositional boundary layers in promoting unmixing around growing crystals at melt-crystal interfaces. Our findings have important implications for the formation of immiscible liquid in a crystal mush, the interpretations of compositional zoning in crystals, and the role of liquid immiscibility in controlling magma physical properties
Electron backscatter diffraction analysis unveils foraminiferal calcite microstructure and processes of diagenetic alteration
Electron backscatter diffraction (EBSD) analysis enables a unique perspective of the internal microstructure of foraminiferal calcite. Specifically, EBSD provides crystallographic data from within the test, highlighting the highly organised “mesocrystal” structure of crystallographically aligned domains throughout the test, formed by sequential deposits of microgranular calcite. We compared EBSD maps across the test walls of both poorly preserved and well-preserved specimens of the planktonic foraminifera species Globigerinoides ruber and Morozovella crater. The EBSD maps, paired with information about intra-test distributions of ratios, allowed us to examine the effects of different diagenetic processes on the foraminifera test. In poorly preserved specimens EBSD data show extensive reorganisation of the biogenic crystal microstructure, indicating differing phases of dissolution, re-precipitation and overgrowth. The specimens with the greatest degree of microstructural reorganisation also show an absence of higher concentration magnesium bands, which are typical features of well-preserved specimens. These findings provide important insights into the extent of post-depositional changes, in both microstructure and geochemical signals that must be considered when utilising foraminifera to generate proxy archive data
Inefficient high-temperature metamorphism in orthogneiss
A novel method utilizing crystallographic orientation and mineral chemistry data, based on large-scale electron backscatter diffraction (EBSD) and microbeam analysis, quantifies the proportion of relict igneous and neoblastic minerals forming variably deformed high-grade orthogneiss. The Cretaceous orthogneiss from Fiordland, New Zealand, comprises intermediate omphacite granulite interlayered with basic eclogite, which was metamorphosed and deformed at T ≈ 850 °C and P ≈ 1.8 GPa after protolith cooling. Detailed mapping of microstructural and physiochemical relations in two strain profiles through subtly distinct intermediate protoliths indicates that up to 32% of the orthogneiss mineralogy is igneous, with the remainder being metamorphic. Domains dominated by igneous minerals occur preferentially in strain shadows to eclogite pods. Distinct metamorphic stages can be identified by texture and chemistry and were at least partially controlled by strain magnitude. At the grain-scale, the coupling of metamorphism and crystal plastic deformation appears to have permitted efficient transformation of an originally igneous assemblage. The effective distinction between igneous and metamorphic paragenesis and their links to deformation history enables greater clarity in interpretations of the makeup of the crust and their causal influence on lithospheric scale processes
Mass transfer in the lower crust: Evidence for incipient melt assisted flow along grain boundaries in the deep arc granulites of Fiordland, New Zealand
Knowledge of mass transfer is critical in improving our understanding of crustal evolution, however mass transfer mechanisms are debated, especially in arc environments. The Pembroke Granulite is a gabbroic gneiss, passively exhumed from depths of >45 km from the arc root of Fiordland, New Zealand. Here, enstatite and diopside grains are replaced by coronas of pargasite and quartz, which may be asymmetric, recording hydration of the gabbroic gneiss. The coronas contain microstructures indicative of the former presence of melt, supported by pseudosection modeling consistent with the reaction having occurred near the solidus of the rock (630–710°C, 8.8–12.4 kbar). Homogeneous mineral chemistry in reaction products indicates an open system, despite limited metasomatism at the hand sample scale. We propose the partial replacement microstructures are a result of a reaction involving an externally derived hydrous, silicate melt and the relatively anhydrous, high-grade assemblage. Trace element mapping reveals a correlation between reaction microstructure development and bands of high-Sr plagioclase, recording pathways of the reactant melt along grain boundaries. Replacement microstructures record pathways of diffuse porous melt flow at a kilometer scale within the lower crust, which was assisted by small proportions of incipient melt providing a permeable network. This work recognizes melt flux through the lower crust in the absence of significant metasomatism, which may be more common than is currently recognized. As similar microstructures are found elsewhere within the exposed Fiordland lower crustal arc rocks, mass transfer of melt by diffuse porous flow may have fluxed an area >10,000 km2
Brecciation at the grain scale within the lithologies of the Winchcombe Mighei‐like carbonaceous chondrite
The Mighei‐like carbonaceous (CM) chondrites have been altered to various extents by water–rock reactions on their parent asteroid(s). This aqueous processing has destroyed much of the primary mineralogy of these meteorites, and the degree of alteration is highly heterogeneous at both the macroscale and nanoscale. Many CM meteorites are also heavily brecciated juxtaposing clasts with different alteration histories. Here we present results from the fine‐grained team consortium study of the Winchcombe meteorite, a recent CM chondrite fall that is a breccia and contains eight discrete lithologies that span a range of petrologic subtypes (CM2.0–2.6) that are suspended in a cataclastic matrix. Coordinated multitechnique, multiscale analyses of this breccia reveal substantial heterogeneity in the extent of alteration, even in highly aqueously processed lithologies. Some lithologies exhibit the full range and can comprise nearly unaltered coarse‐grained primary components that are found directly alongside other coarse‐grained components that have experienced complete pseudomorphic replacement by secondary minerals. The preservation of the complete alteration sequence and pseudomorph textures showing tochilinite–cronstedtite intergrowths are replacing carbonates suggest that CMs may be initially more carbonate rich than previously thought. This heterogeneity in aqueous alteration extent is likely due to a combination of microscale variability in permeability and water/rock ratio generating local microenvironments as has been established previously. Nevertheless, some of the disequilibrium mineral assemblages observed, such as hydrous minerals juxtaposed with surviving phases that are typically more fluid susceptible, can only be reconciled by multiple generations of alteration, disruption, and reaccretion of the CM parent body at the grain scale
Determining relative bulk viscosity of kilometre-scale crustal units using field observations and numerical modelling
Though the rheology of kilometre-scale polymineralic rock units is crucial for reliable large-scale, geotectonic models, this information is difficult to obtain. In geotectonic models, a layer is defined as an entity at the kilometre scale, even though it is heterogeneous at the millimetre to metre scale. Here, we use the shape characteristics of the boundaries between rock units to derive the relative bulk viscosity of those units at the kilometre scale. We examine the shape of a vertically oriented ultramafic, harzburgitic-lherzolitic unit, which developed a kilometre-scale pinch and swell structure at mid-crustal conditions (~ 600 °C, ~ 8.5 kbar), in the Anita Shear Zone, New Zealand. The ultramafic layer is embedded between a typical polymineralic paragneiss to the west, and a feldspar-quartz-hornblende orthogneiss, to the east. Notably, the boundaries on either side of the ultramafic layer give the ultramafics an asymmetric shape. Microstructural analysis shows that deformation was dominated by dislocation creep (n = 3). Based on the inferred rheological behaviour from the field, a series of numerical simulations are performed. Relative and absolute values are derived for bulk viscosity of the rock units by comparing boundary tortuosity difference measured on the field example and the numerical series. Our analysis shows that during deformation at mid-crustal conditions, paragneisses can be ~ 30 times less viscous than an ultramafic unit, whereas orthogneisses have intermediate viscosity, ~ 3 times greater than the paragneisses. If we assume a strain rate of 10⁻ ¹⁴ s⁻ ¹ the ultramafic, orthogneiss and paragneiss have syn-deformational viscosities of 3 × 10²², 2.3 × 10²¹ and 9.4 × 10²⁰ Pa s, respectively. Our study shows pinch and swell structures are useful as a gauge to assess relative bulk viscosity of rock units based on shape characteristics at the kilometre scale and in non-Newtonian flow regimes, even where heterogeneity occurs within the units at the outcrop scale
Brecciation at the grain scale within the lithologies of the Winchcombe Mighei-like carbonaceous chondrite
The Mighei‐like carbonaceous (CM) chondrites have been altered to various extents by water–rock reactions on their parent asteroid(s). This aqueous processing has destroyed much of the primary mineralogy of these meteorites, and the degree of alteration is highly heterogeneous at both the macroscale and nanoscale. Many CM meteorites are also heavily brecciated juxtaposing clasts with different alteration histories. Here we present results from the fine‐grained team consortium study of the Winchcombe meteorite, a recent CM chondrite fall that is a breccia and contains eight discrete lithologies that span a range of petrologic subtypes (CM2.0–2.6) that are suspended in a cataclastic matrix. Coordinated multitechnique, multiscale analyses of this breccia reveal substantial heterogeneity in the extent of alteration, even in highly aqueously processed lithologies. Some lithologies exhibit the full range and can comprise nearly unaltered coarse‐grained primary components that are found directly alongside other coarse‐grained components that have experienced complete pseudomorphic replacement by secondary minerals. The preservation of the complete alteration sequence and pseudomorph textures showing tochilinite–cronstedtite intergrowths are replacing carbonates suggest that CMs may be initially more carbonate rich than previously thought. This heterogeneity in aqueous alteration extent is likely due to a combination of microscale variability in permeability and water/rock ratio generating local microenvironments as has been established previously. Nevertheless, some of the disequilibrium mineral assemblages observed, such as hydrous minerals juxtaposed with surviving phases that are typically more fluid susceptible, can only be reconciled by multiple generations of alteration, disruption, and reaccretion of the CM parent body at the grain scale
- …