Coil-to-Bridge Transitions of Self-Assembled Water Chains Observed in a Nanoscopic Meniscus

Ten downward portions in the large oscillatory force–distance curve reported earlier are analyzed to understand a nanoscale water meniscus confined between a sharp probe and a flat substrate in air. The sigmoidal shape of each portion leads to the assumption that the meniscus is made up of n independent transitions of two states: one for a coil state and the other for a bridge state. The analysis reveals that each downward portion occurs due to a coil-to-bridge transition of n self-assembled water chains whose length ranges between 197 and 383 chain units. The transition provides novel insights into water’s unique properties like high surface tension and the long-range condensation distances

Polyglycolic acid microneedles modified with inkjet-deposited antifungal coatings

In this study, the authors examined use of piezoelectric inkjet printing to apply an antifungal agent, voriconazole, to the surfaces of biodegradable polyglycolic acid microneedles. Polyglycolic acid microneedles with sharp tips (average tip radius = 25 ± 3 μm) were prepared using a combination of injection molding and drawing lithography. The elastic modulus (9.9 ± 0.3 GPa) and hardness (588.2 ± 33.8 MPa) values of the polyglycolic acid material were determined using nanoindentation and were found to be suitable for use in transdermal drug delivery devices. Voriconazole was deposited onto the polyglycolic acid microneedles by means of piezoelectric inkjet printing. It should be noted that voriconazole has poor solubility in water; however, it is readily soluble in many organic solvents. Optical imaging, scanning electron microscopy, energy dispersive x-ray spectrometry, and Fourier transform infrared spectroscopy were utilized to examine the microneedle geometries and inkjet-deposited surface coatings. F..

MIP-based electrochemical protein profiling

We present the development of an electrochemical biosensor based on modified glassy carbon (GC) electrodes using hydrogel-based molecularly imprinted polymers (MIPs) has been fabricated for protein detection. The coupling of pattern recognition techniques via principal component analysis (PCA) has resulted in unique protein fingerprints for corresponding protein templates, allowing for MIP-based protein profiling. Polyacrylamide MIPs for memory imprinting of bovine haemoglobin (BHb), equine myoglobin (EMb), cytochrome C (Cyt C), and bovine serum albumin (BSA), alongside a non-imprinted polymer (NIP) control, were spectrophotometrically, and electrochemically characterised using modified GC electrodes. Rebinding capacities (Q) were revealed to be higher for larger proteins (BHb and BSA, Q ≈ 4.5) while (EMb and Cyt C, Q ≈ 2.5). Electrochemical results show that due to the selective nature of MIPs, protein arrival at the electrode via diffusion is delayed, in comparison to a NIP, by attractive selective interactions with exposed MIP cavities. However, at lower concentrations such discriminations are difficult due to low levels of MIP rebinding. PCA loading plots revealed 5 variables responsible for the separation of the proteins; Ep, Ip, E1/2 , Iat −0.8 V, �Idecay peak current to −0.8 V. Statistical symmetric measures of agreement using Cohen’s kappa coefficient (K) were revealed to be 63% for bare GC, 96% for NIP and 100% for MIP. Therefore, our results show that with the use of PCA such discriminations are achievable, also with the advantage of faster detection rates. The possibilities for this MIP technology once fully developed are vast, including uses in bio-sample clean-up or selective extraction, replacement of biological antibodies in immunoassays, as well as biosensors for medicine, food and the environment

Personal and Community Factors as Predictors of different types of community engagement

Citizen participation is an important element of local democracy because it increases residents’ influence over local community issues. Using a sample of 494 Israeli participants, this paper examines, for the first time, the unique and combined contribution of personal factors (self‐ esteem and mastery) and community factors (years of activity, knowledge of local services, trust in leaders, community commitment, and community belonging) to the explanation of the variance in each of two types of community engagement: development and planning, and activism and advocacy. Data analysis included hierarchical regression that examined all variables and possible interactions among them. The results indicate that mastery and the community variables, except for years of activity, predict both types of engagement. Interestingly, knowledge of services negatively predicts both, while trust in leaders also predicts both types of engagement, but in opposite directions. In conclusion, the paper considers how these findings might inform community work interventions

Does brane cosmology have realistic principles?

The maximal symmetry, or Perfect Cosmological Principle(PCP), that prevents AdS type spaces from degenerating into anti-inflationary collapse is argued to be unphysical. For example, the simple requirement that brane-bulk models should be the result of having evolved from even more energetic string phenomena picks out a preferred time direction. We question whether quantum cosmological reasoning can be applied in any meaningful way to obtain, what are essentially, classical constructs . An alternative scheme is to more readily accept the PCP and allow the branes to also become eternal. A perpetually expanding and contracting brane model could be driven by the presence of charged black holes in the AdS bulk, that effectively violates the weak-energy condition as singularities are approached. This can be contrasted with the so-called Ekpyrotic universe which also closely accepts the PCP. This being broken only by occasional collisions between branes, that can then simulate a big bang cosmology.Comment: extended version and title chang

Direct Observation of Self-Assembled Chain-Like Water Structures in a Nanoscopic Water Meniscus

Sawtooth-like oscillatory forces generated by water molecules confined between two oxidized silicon surfaces were observed using a cantilever-based optical interfacial force microscope when the two surfaces approached each other in ambient environments. The humidity-dependent oscillatory amplitude and periodicity were 3-12 nN and 3-4 water diameters, respectively. Half of each period was matched with a freely jointed chain model, possibly suggesting that the confined water behaved like a bundle of water chains. The analysis also indicated that water molecules self-assembled to form chain-like structures in a nanoscopic meniscus between two hydrophilic surfaces in air. From the friction force data measured simultaneously, the viscosity of the chain-like water was estimated to be between 108 and 1010 times greater than that of bulk water. The suggested chain-like structure resolves many unexplained properties of confined water at the nanometer scale, thus dramatically improving the understanding of a variety of water systems in nature

Conceptualising Gamification Risks to Teamwork within Enterprise

Gamification in businesses refers to the use of technology-assisted solutions to boost or change staff attitude, perception and behaviour, in relation to certain business goals and tasks, individually or collectively. Previous research indicated that gamification techniques can introduce risks to the business environment, and not only fail to make a positive change, but also raise concerns in relation to ethics, quality of work, and well-being at a workplace. Although the problem is already recognised in principle, there is still a need to clarify and concretise those risks, their factors and their relation to the gamification dynamics and mechanics. To address this, we conducted multi-staged empirical research, including two months’ observation and interview study, in two large-scale businesses using gamification in their workplace. In this paper, we focus on gamification risks related to teamwork within the enterprise. We outline various risk mitigation strategies and map them to primary types of gamification risks. By accomplishing such conceptualisation, we pave the way towards methods to model, detect and predict gamification risks on teamwork and recommend and design practices and strategies to tackle them

A c-di-GMP Effector System Controls Cell Adhesion by Inside-Out Signaling and Surface Protein Cleavage

In Pseudomonas fluorescens Pf0-1 the availability of inorganic phosphate (Pi) is an environmental signal that controls biofilm formation through a cyclic dimeric GMP (c-di-GMP) signaling pathway. In low Pi conditions, a c-di-GMP phosphodiesterase (PDE) RapA is expressed, depleting cellular c-di-GMP and causing the loss of a critical outer-membrane adhesin LapA from the cell surface. This response involves an inner membrane protein LapD, which binds c-di-GMP in the cytoplasm and exerts a periplasmic output promoting LapA maintenance on the cell surface. Here we report how LapD differentially controls maintenance and release of LapA: c-di-GMP binding to LapD promotes interaction with and inhibition of the periplasmic protease LapG, which targets the N-terminus of LapA. We identify conserved amino acids in LapA required for cleavage by LapG. Mutating these residues in chromosomal lapA inhibits LapG activity in vivo, leading to retention of the adhesin on the cell surface. Mutations with defined effects on LapD's ability to control LapA localization in vivo show concomitant effects on c-di-GMP-dependent LapG inhibition in vitro. To establish the physiological importance of the LapD-LapG effector system, we track cell attachment and LapA protein localization during Pi starvation. Under this condition, the LapA adhesin is released from the surface of cells and biofilms detach from the substratum. This response requires c-di-GMP depletion by RapA, signaling through LapD, and proteolytic cleavage of LapA by LapG. These data, in combination with the companion study by Navarro et al. presenting a structural analysis of LapD's signaling mechanism, give a detailed description of a complete c-di-GMP control circuit—from environmental signal to molecular output. They describe a novel paradigm in bacterial signal transduction: regulation of a periplasmic enzyme by an inner membrane signaling protein that binds a cytoplasmic second messenger

Cargo Cults in Information Systems Development: a Definition and an Analytical Framework

Organizations today adopt agile information systems development methods (ISDM), but many do not succeed with the adoption process and in achieving desired results. Systems developers sometimes fail in efficient use of ISDM, often due to a lack of understanding the fundamental intentions of the chosen method. In many cases organizations simply imitate the behavior of others without really understanding why. This conceptual paper defines this phenomenon as an ISDM cargo cult behavior and proposes an analytical framework to identify such situations. The concept of cargo cults originally comes from the field of social anthropology and has been used to explain irrational, ritualistic imitation of certain behavior. By defining and introducing the concept in the field of information systems development we provide a diagnostic tool to better understand one of the reasons why ISDM adoption sometimes fail

Standalone vertex finding in the ATLAS muon spectrometer

A dedicated reconstruction algorithm to find decay vertices in the ATLAS muon spectrometer is presented. The algorithm searches the region just upstream of or inside the muon spectrometer volume for multi-particle vertices that originate from the decay of particles with long decay paths. The performance of the algorithm is evaluated using both a sample of simulated Higgs boson events, in which the Higgs boson decays to long-lived neutral particles that in turn decay to bbar b final states, and pp collision data at √s = 7 TeV collected with the ATLAS detector at the LHC during 2011