2,928 research outputs found
Implementation and Performance of the ATLAS Second Level Jet Trigger
ATLAS is one of the four major LHC experiments, designed to cover a wide range of physics topics. In order to cope with a rate of 40 MHz and 25 interactions per bunch crossing, the ATLAS trigger system is divided in three different levels. The first one (LVL1, hardware based) identifies signatures in 2 microseconds that are confirmed by the the following trigger levels (software based). The Second Level Trigger (LVL2) only looks at a region of the space around the LVL1 signature (called Region of Interest or ROI), confirming/rejecting the event in about 10 ms, while the Event Filter (Third Level Trigger, EF) has potential full event access and larger processing times, of the order of 1 s. The jet selection starts at the LVL1 with dedicated processors that search for high ET hadronic energy depositions. At the LVL2, the jet signatures are verified with the execution of a dedicated, fast jet reconstruction algorithm. Given the fact that the main jet's background are jets,the energy calibration at the LVL2 is one of the major dificulties of this trigger, allowing to distinguish low/high energy jets. The algorithm for the calibration has been chosen to be fast and robust, with a good performance. The other major dificulty is the execution time of the algorithm,dominated by the data unpacking time due to the large sizes of the jet ROI. In order to reduce the execution time, three possible granularities have been proposed and are being evaluated: cell based (standard), energy sums calculated at each Fron-End Board (FEB) and the use of the LVL1 Trigger Towers. The FEB and Trigger Tower granularities are also being used/evaluated for the reconstruction of the missing ET triggers at the Event Filter, given the short times available to process the full event. In this presentation, the design and implementation of the jet trigger of ATLAS will be discussed in detail, emphasasing the major dificulties of each selection step. The performance of the jet algorithm, including timing, eficiencies and rates will also be shown, with detailed comparisons of the different unpacking modes
Observation of two new baryon resonances
Two structures are observed close to the kinematic threshold in the mass spectrum in a sample of proton-proton collision data, corresponding
to an integrated luminosity of 3.0 fb recorded by the LHCb experiment.
In the quark model, two baryonic resonances with quark content are
expected in this mass region: the spin-parity and
states, denoted and .
Interpreting the structures as these resonances, we measure the mass
differences and the width of the heavier state to be
MeV,
MeV,
MeV, where the first and second
uncertainties are statistical and systematic, respectively. The width of the
lighter state is consistent with zero, and we place an upper limit of
MeV at 95% confidence level. Relative
production rates of these states are also reported.Comment: 17 pages, 2 figure
Search for CP violation in decays
A model-independent search for direct CP violation in the Cabibbo suppressed
decay in a sample of approximately 370,000 decays is
carried out. The data were collected by the LHCb experiment in 2010 and
correspond to an integrated luminosity of 35 pb. The normalized Dalitz
plot distributions for and are compared using four different
binning schemes that are sensitive to different manifestations of CP violation.
No evidence for CP asymmetry is found.Comment: 13 pages, 8 figures, submitted to Phys. Rev.
Differential branching fraction and angular analysis of the decay B0→K∗0μ+μ−
The angular distribution and differential branching fraction of the decay B 0→ K ∗0 μ + μ − are studied using a data sample, collected by the LHCb experiment in pp collisions at s√=7 TeV, corresponding to an integrated luminosity of 1.0 fb−1. Several angular observables are measured in bins of the dimuon invariant mass squared, q 2. A first measurement of the zero-crossing point of the forward-backward asymmetry of the dimuon system is also presented. The zero-crossing point is measured to be q20=4.9±0.9GeV2/c4 , where the uncertainty is the sum of statistical and systematic uncertainties. The results are consistent with the Standard Model predictions
Opposite-side flavour tagging of B mesons at the LHCb experiment
The calibration and performance of the oppositeside
flavour tagging algorithms used for the measurements
of time-dependent asymmetries at the LHCb experiment
are described. The algorithms have been developed using
simulated events and optimized and calibrated with
B
+ →J/ψK
+, B0 →J/ψK
∗0 and B0 →D
∗−
μ
+
νμ decay
modes with 0.37 fb−1 of data collected in pp collisions
at
√
s = 7 TeV during the 2011 physics run. The oppositeside
tagging power is determined in the B
+ → J/ψK
+
channel to be (2.10 ± 0.08 ± 0.24) %, where the first uncertainty
is statistical and the second is systematic
Measurement of the relative rate of prompt χc0, χc1 and χc2 production at √s=7TeV
Prompt production of charmonium χc0, χc1 and χc2 mesons is studied using proton-proton collisions at the LHC at a centre-of-mass energy of √s=7TeV. The χc mesons are identified through their decay to J/ψγ, with J/ψ→μ+mu− using photons that converted in the detector. A data sample, corresponding to an integrated luminosity of 1.0fb−1 collected by the LHCb detector, is used to measure the relative prompt production rate of χc1 and χc2 in the rapidity range 2.0<y<4.5 as a function of the J/ψ transverse momentum from 3 to 20 GeV/c. First evidence for χc0 meson production at a hadron collider is also presented
Search for CP violation in D+→ϕπ+ and D+s→K0Sπ+ decays
A search for CP violation in D + → ϕπ + decays is performed using data collected in 2011 by the LHCb experiment corresponding to an integrated luminosity of 1.0 fb−1 at a centre of mass energy of 7 TeV. The CP -violating asymmetry is measured to be (−0.04 ± 0.14 ± 0.14)% for candidates with K − K + mass within 20 MeV/c 2 of the ϕ meson mass. A search for a CP -violating asymmetry that varies across the ϕ mass region of the D + → K − K + π + Dalitz plot is also performed, and no evidence for CP violation is found. In addition, the CP asymmetry in the D+s→K0Sπ+ decay is measured to be (0.61 ± 0.83 ± 0.14)%
Measurement of the CP-violating phase phi_s in the decay Bs->J/psi phi
We present a measurement of the time-dependent CP-violating asymmetry in B_s
-> J/psi phi decays, using data collected with the LHCb detector at the LHC.
The decay time distribution of B_s -> J/psi phi is characterized by the decay
widths Gamma_H and Gamma_L of the heavy and light mass eigenstates of the
B_s-B_s-bar system and by a CP-violating phase phi_s. In a sample of about 8500
B_s -> J/psi phi events isolated from 0.37 fb^-1 of pp collisions at sqrt(s)=7
TeV we measure phi_s = 0.15 +/- 0.18 (stat) +/- 0.06 (syst) rad. We also find
an average B_s decay width Gamma_s == (Gamma_L + Gamma_H)/2 = 0.657 +/- 0.009
(stat) +/- 0.008 (syst) ps^-1 and a decay width difference Delta Gamma_s ==
Gamma_L - Gamma_H} = 0.123 +/- 0.029 (stat) +/- 0.011 (syst) ps^-1. Our
measurement is insensitive to the transformation (phi_s,DeltaGamma_s --> pi -
phi_s, - Delta Gamma_s.Comment: 9 pages, 3 figure
Searches for B0(s)→J/ψppˉ and B+→J/ψppˉπ+ decays
The results of searches for B0(s)→J/ψ pp¯ and B + → J/ψ p p¯ π+ decays are reported. The analysis is based on a data sample, corresponding to an integrated luminosity of 1.0 fb−1 of pp collisions, collected with the LHCb detector. An excess with 2.8 σ significance is seen for the decay B0s→J/ψ pp¯ and an upper limit on the branching fraction is set at the 90 % confidence level: B(B0s→J/ψ pp¯) < 4.8 × 10−6, which is the first such limit. No significant signals are seen for B0 → J/ψ pp¯ and B+ → J/ψ pp¯ π + decays, for which the corresponding limits are set: B(B0→J/ψ pp¯) < 5.2 × 10−7, which significantly improves the existing limit; and B(B+→J/ψ pp¯π+) < 5.0 × 10−7, which is the first limit on this branching fraction
- …