Relations between the modulus of elasticity of binary alloys and their structure

A comprehensive survey of the elastic modulus of binary alloys as a function of the concentration is presented. Alloys that form continuous solid solutions, limited solid solutions, eutectic alloys, and alloys with intermetallic phases are investigated. Systems having the most important structures have been examined to obtain criteria for the relation between lattice structure, type of binding, and elastic behavior

Stellar (n,gamma) cross sections of p-process isotopes PartI: 102Pd, 120Te, 130,132Ba,and 156Dy

We have investigated the (n,gamma) cross sections of p-process isotopes with the activation technique. The measurements were carried out at the Karlsruhe Van de Graaff accelerator using the 7Li(p,n)7Be source for simulating a Maxwellian neutron distribution of kT = 25 keV. Stellar cross section measurements are reported for the light p-process isotopes 102Pd, 120Te, 130,132Ba, and 156Dy. In a following paper the cross sections of 168Yb, 180W, 184Os, 190Pt, and 196Hg will be discussed. The data are extrapolated to p-process energies by including information from evaluated nuclear data libraries. The results are compared to standard Hauser-Feshbach models frequently used in astrophysics.Comment: 13 pages, 4 figure

Solving the stellar 62Ni problem with AMS

An accurate knowledge of the neutron capture cross sections of 62,63Ni is crucial since both isotopes take key positions which affect the whole reaction flow in the weak s process up to A=90. No experimental value for the 63Ni(n,gamma) cross section exists so far, and until recently the experimental values for 62Ni(n,gamma) at stellar temperatures (kT=30 keV) ranged between 12 and 37 mb. This latter discrepancy could now be solved by two activations with following AMS using the GAMS setup at the Munich tandem accelerator which are also in perfect agreement with a recent time-of-flight measurement. The resulting (preliminary) Maxwellian cross section at kT=30 keV was determined to be 30keV = 23.4 +/- 4.6 mb. Additionally, we have measured the 64Ni(gamma,n)63Ni cross section close to threshold. Photoactivations at 13.5 MeV, 11.4 MeV and 10.3 MeV were carried out with the ELBE accelerator at Forschungszentrum Dresden-Rossendorf. A first AMS measurement of the sample activated at 13.5 MeV revealed a cross section smaller by more than a factor of 2 compared to NON-SMOKER predictions.Comment: Proceedings of the 11th International Conference on Accelerator Mass Spectrometry in Rome, Sept. 14-19, 2008; to be published in Nucl. Instr. Meth.

Direct measurements of neutron capture on radioactive isotopes

We simulated the response of a 4p calorimetric g-detector array to decays of radioactive isotopes on the s-process path. The GEANT 3.21 simulation package was used. The main table contains estimates on the maximum sample size and required neutron flux based on the latest available neutron capture cross section at 30 keV. The results are intended to be used to estimate the feasibility of neutron capture measurements with 4p arrays using the time of flight technique

First Measurement of the 64Ni(gamma,n)63Ni Cross Section

Copyright owned by the author(s) under the terms of the Creative Commons Attribution-Non Commercial-ShareAlike LicenceIn the past 10 years new and more accurate stellar neutron capture cross section measurements have changed and improved the abundance predictions of the weak s process. Among other elements in the region between iron and strontium, most of the copper abundance observed today in the solar system distribution was produced by the s process in massive stars. However, experimental data for the stellar 63Ni(n,gamma)64Ni cross section are still missing, but is strongly required for a reliable prediction of the copper abundances. 63Ni (t1/2 =101.2 a) is a branching point and also bottleneck in the weak s process flow, and abehaves differently during core He and shell C burning. During core He burning the reaction flow proceeds via beta-decay to 63Cu, and a change of the 63Ni(n,gamma)64Ni cross section would have no influence. However, this behavior changes at higher temperatures and neutron densities during the shell C burning phase. Under these conditions, a significant amount of the s process nucleosynthesis flow is passing through the channel 62Ni(n,gamma)63Ni(n,gamma)64Ni. At present only theoretical estimates are available for the 63Ni(n,gamma)64Ni cross section. The corresponding uncertainty affects the production of 63Cu in present s process nucleosynthesis calculations and propagates to the abundances of the heavier species up to A=70. So far, experimental information is also missing for the inverse 64Ni(gamma,n) channel. We have measured for the first time the 64Ni(gamma,n)63Ni cross section and also combined for the first time successfully the photoactivation technique with subsequent Accelerator Mass Spectrometry (AMS). The activations at the ELBE facility in Dresden-Rossendorf were followed by the 63Ni/64Ni determination with AMS at the MLL accelerator laboratory in Garching. First results indicate that theoretical predictions have overestimated this cross section up to now. If this also holds for the inverse channel 63Ni(n,gamma)64Ni, more 63Ni is accumulated during the high neutron density regime of the C shell that will contribute to the final abundance of 63Cu by radiogenic decay. In this case, also a lower s process efficiency is expected for the heavier species along the neutron capture path up to the Ga-Ge regio

Oncoplastic Surgical Techniques for Personalized Breast Conserving Surgery in Breast Cancer Patient with Small to Moderate Sized Breast

Oncoplastic surgery has revolutionized the field of breast conserving surgery (BCS). The final aims of this technique are to obtain an adequate resection margin that will reduce the rate of local recurrence while simultaneously improving cosmetic outcomes. To obtain successful results after oncoplastic surgery, it is imperative that patients be risk-stratified based on risk factors associated with positive margins, that relevant imaging studies be reviewed, and that the confirmation of negative margins be confirmed during the initial operation. Patients who had small- to moderate-sized breasts are the most likely to be dissatisfied with the cosmetic outcome of surgery, even if the defect is small; therefore, oncoplastic surgery in this population is warranted. Reconstruction of the remaining breast tissue is divided into volume displacement and volume replacement techniques. The use of the various oncoplastic surgeries is based on tumor location and excised breast volume. If the excised volume is less than 100 g, the tumor location is used to determine which technique should be used, with the most commonly used technique being volume displacement. However, if the excised volume is greater than 100 g, the volume replacement method is generally used, and in cases where more than 150 g is excised, the latissimus dorsi myocutaneous flap may be used to obtain a pleasing cosmetic result. The local recurrence rate after oncoplastic surgery was lower than that of conventional BCS, as oncoplastic surgery reduced the rate of positive resection margins by resecting a wider section of glandular tissue. If the surgeon understands the advantages and disadvantages of oncoplastic surgery, and the multidisciplinary breast team is able to successfully collaborate, then the success rate of BCS with partial breast reconstruction can be increased while also yielding a cosmetically appealing outcome

Cross Sections of the 83Rb (p,γ)84Sr and 84Kr(p,γ)85Rb Reactions at Energies Characteristic of the Astrophysical γ Process

We have measured the cross section of the 83 Rb ( p , γ ) 84 Sr radiative capture reaction in inverse kinematics using a radioactive beam of 83 Rb at incident energies of 2.4 and 2.7 A MeV. Prior to the radioactive beam measurement, the 84 Kr ( p , γ ) 85 Rb radiative capture reaction was measured in inverse kinematics using a stable beam of 84 Kr at an incident energy of 2.7 A MeV. The effective relative kinetic energies of these measurements lie within the relevant energy window for the γ process in supernovae. The central values of the measured partial cross sections of both reactions were found to be 0.17 – 0.42 times the predictions of statistical model calculations. Assuming the predicted cross section at other energies is reduced by the same factor leads to a slightly higher calculated abundance of the p nucleus 84 Sr , caused by the reduced rate of the 84 Sr ( γ , p ) 83 Rb reaction derived from the present measurement

Measurement of the (90,91,92,93,94,96)Zr(n,gamma) and (139)La(n,gamma) cross sections at n_TOF

Open AccessNeutron capture cross sections of Zr and La isotopes have important implications in the field of nuclear astrophysics as well as in the nuclear technology. In particular the Zr isotopes play a key role for the determination of the neutron density in the He burning zone of the Red Giant star, while the (139)La is important to monitor the s-process abundances from Ba up to Ph. Zr is also largely used as structural materials of traditional and advanced nuclear reactors. The nuclear resonance parameters and the cross section of (90,91,92,93,94,96)Zr and (139)La have been measured at the n_TOF facility at CERN. Based on these data the capture resonance strength and the Maxwellian-averaged cross section were calculated

Measurements of high-energy neutron-induced fission of (nat)Pb and (209)Bi

This is an Open Access article distributed under the terms of the Creative Commons Attribution-Noncommercial License 3.0, which permits unrestricted use, distribution, and reproduction in any noncommercial medium, provided the original work is properly citedThe CERN Neutron Time-Of-Flight (n_TOF) facility is well suited to measure low cross sections as those of neutron-induced fission in subactinides. The cross section ratios of (nat)Pb and (209)Bi relative to (235)U and (238)U were measured using PPAC detectors and a fragment coincidence method that allows us to identify the fission events. The present experiment provides first results for neutron-induced fission up to 1 GeV. Good agreement is found with previous experimental data below 200 MeV. The comparison with proton-induced fission indicates that the limiting regime where neutron-induced and proton-induced fission reach equal cross sections is close to 1 GeV

Measurement of the neutron capture cross section of the s-only isotope 204Pb from 1 eV to 440 keV

The neutron capture cross section of 204Pb has been measured at the CERN n_TOF installation with high resolution in the energy range from 1 eV to 440 keV. An R-matrix analysis of the resolved resonance region, between 1 eV and 100 keV, was carried out using the SAMMY code. In the interval between 100 keV and 440 keV we report the average capture cross section. The background in the entire neutron energy range could be reliably determined from the measurement of a 208Pb sample. Other systematic effects in this measurement could be investigated and precisely corrected by means of detailed Monte Carlo simulations. We obtain a Maxwellian average capture cross section for 204Pb at kT=30 keV of 79(3) mb, in agreement with previous experiments. However our cross section at kT=5 keV is about 35% larger than the values reported so far. The implications of the new cross section for the s-process abundance contributions in the Pb/Bi region are discussed.Comment: 8 pages, 3 figures, article submitted to Phys. Rev.