34 research outputs found
Multiwavelength observations of 3C 454.3 II. The AGILE 2007 December campaign
We report on the second AGILE multiwavelength campaign of the blazar 3C 454.3
during the first half of December 2007. This campaign involved AGILE, Spitzer,
Swift,Suzaku,the WEBT consortium,the REM and MITSuME telescopes,offering a
broad band coverage that allowed for a simultaneous sampling of the synchrotron
and inverse Compton (IC) emissions.The 2-week AGILE monitoring was accompanied
by radio to optical monitoring by WEBT and REM and by sparse observations in
mid-Infrared and soft/hard X-ray energy bands performed by means of Target of
Opportunity observations by Spitzer, Swift and Suzaku, respectively.The source
was detected with an average flux of~250x10^{-8}ph cm^-2s^-1 above 100
MeV,typical of its flaring states.The simultaneous optical and gamma-ray
monitoring allowed us to study the time-lag associated with the variability in
the two energy bands, resulting in a possible ~1-day delay of the gamma-ray
emission with respect to the optical one. From the simultaneous optical and
gamma-ray fast flare detected on December 12, we can constrain the delay
between the gamma-ray and optical emissions within 12 hours. Moreover, we
obtain three Spectral Energy Distributions (SEDs) with simultaneous data for
2007 December 5, 13, 15, characterized by the widest multifrequency coverage.
We found that a model with an external Compton on seed photons by a standard
disk and reprocessed by the Broad Line Regions does not describe in a
satisfactory way the SEDs of 2007 December 5, 13 and 15. An additional
contribution, possibly from the hot corona with T=10^6 K surrounding the jet,
is required to account simultaneously for the softness of the synchrotron and
the hardness of the inverse Compton emissions during those epochs.Comment: 13 pages, 8 figures, 2 tables, Accepted for publication in Ap
Adult spawning and early larval development of the endangered bivalve Pinna nobilis
[EN] The development of aquaculture activities has posed an alternative solution for the preservation of some overexploited shell¿sh ¿sheries worldwide. In the same way, endemic Mediterranean bivalves such as Pinna nobilis, highly threatened by habitat loss and coastal pollution, could found in aquaculture a solution for preserving the continuity of the species. Given the endangered status of the species, the biological and ecological processes regulating natural populations have been well studied, but there are still important knowledge gaps preventing the development of viable arti¿cial cultures. This study describes for the ¿rst time the larval development of P. nobilis (from fertilization until pediveliger larval stages) in captivity conditions. Moreover, di¿erent rearing tanks of 5, 16 and 80 L, larvae density from 1 to 600 larvae mL¿1, light conditions, food doses, were tested in order to establish the bases for the optimal rearing of the species and provide a source of individuals for restoring ¿eld populations. Results showed that 16 L tanks with a concentration of 2 larvae mL¿1, constant temperature of 21 °C, 12/12 h photoperiod and fed with an ¿optimal¿ mixture of 25 cells per ¿L of Chaetoceros calcitrans + 33.3 cells per¿L ofPavlova lutheri + 100 cells per¿L ofIsochrysis galbana¿ appear to be the best conditions to rearlarvae ofP. nobilis.Di¿erentcaptivity conditions such as loweror highertank volume, larvae density, or food doses; light privation did not report better results for larval development.The present study was financed by the Caisse d'Epargne Cote d'Azur. We are also grateful to the research crew of the Institut Oceanographique Paul Ricard and the Catholic University of Valencia for their technical support and help collecting and maintaining fan mussels. Special thanks to the reviewers for their constructive and necessary suggestions.Trigos, S.; Vicente, N.; Prado, P.; Espinos Gutierrez, FJ. (2018). Adult spawning and early larval development of the endangered bivalve Pinna nobilis. Aquaculture. 483:102-110. doi:10.1016/j.aquaculture.2017.10.015S10211048
Impact of cross-section uncertainties on supernova neutrino spectral parameter fitting in the Deep Underground Neutrino Experiment
A primary goal of the upcoming Deep Underground Neutrino Experiment (DUNE) is
to measure the MeV neutrinos produced by a Galactic
core-collapse supernova if one should occur during the lifetime of the
experiment. The liquid-argon-based detectors planned for DUNE are expected to
be uniquely sensitive to the component of the supernova flux, enabling
a wide variety of physics and astrophysics measurements. A key requirement for
a correct interpretation of these measurements is a good understanding of the
energy-dependent total cross section for charged-current
absorption on argon. In the context of a simulated extraction of
supernova spectral parameters from a toy analysis, we investigate the
impact of modeling uncertainties on DUNE's supernova neutrino
physics sensitivity for the first time. We find that the currently large
theoretical uncertainties on must be substantially reduced
before the flux parameters can be extracted reliably: in the absence of
external constraints, a measurement of the integrated neutrino luminosity with
less than 10\% bias with DUNE requires to be known to about 5%.
The neutrino spectral shape parameters can be known to better than 10% for a
20% uncertainty on the cross-section scale, although they will be sensitive to
uncertainties on the shape of . A direct measurement of
low-energy -argon scattering would be invaluable for improving the
theoretical precision to the needed level.Comment: 25 pages, 21 figure
Highly-parallelized simulation of a pixelated LArTPC on a GPU
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on 10^3 pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype
The DUNE far detector vertical drift technology. Technical design report
DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals