Design and construction of a prototype ACTS propagation terminal

The launch schedule for the Advanced Communication Technology Satellite (ACTS) spacecraft did not leave sufficient time for completion of the prototype ACTS Propagation Terminals (APT) prior to initiation of the APT production phase. In fact, the approach used was to construct and test all subassemblies of the terminal with special emphasis on the technically challenging portions. These include the RF front end that uses a state-of-the-art down converter which integrates a low noise amplifier, mixer, post amplifier, filter, and local oscillator port frequency doubler into a single small package. In addition, a new digital receiver that uses the latest DSP technology was developed. Both of these subassemblies were thoroughly tested. The highest risk technology in the APT program was the digital receiver. Several candidate algorithms and DSP chips were investigated early on, primarily under JPL sponsorship. A receiver was constructed based on Texas Instruments chip. The final prototype digital receiver was one based on an Analog Devices chip. The design and test results are documented in a report prepared for this grant. A Primary Design Review (PDR) was conducted 30 May 1991, and a Critical Design Review was held 7 Jul. 1992. Final complete documentation of the APT's will appear in the form of three reports: a hardware description report, a report on the data collection code (ACTS VIEW), and a report on the preprocessing code

Insufficient discriminant validity:a comment on Bove, Pervan, Beatty and Shiu (2009)

Bove, Pervan, Beatty, and Shiu [Bove, LL, Pervan, SJ, Beatty, SE, Shiu, E. Service worker role in encouraging customer organizational citizenship behaviors. J Bus Res 2009;62(7):698–705.] develop and test a latent variable model of the role of service workers in encouraging customers' organizational citizenship behaviors. However, Bove et al. [Bove, LL, Pervan, SJ, Beatty, SE, Shiu, E. Service worker role in encouraging customer organizational citizenship behaviors. J Bus Res 2009;62(7):698–705.] claim support for hypothesized relationships between constructs that, due to insufficient discriminant validity regarding certain constructs, may be inaccurate. This research comment discusses what discriminant validity represents, procedures for establishing discriminant validity, and presents an example of inaccurate discriminant validity assessment based upon the work of Bove et al. [Bove, LL, Pervan, SJ, Beatty, SE, Shiu, E. Service worker role in encouraging customer organizational citizenship behaviors. J Bus Res 2009;62(7):698–705.]. Solutions to discriminant validity problems and a five-step procedure for assessing discriminant validity then conclude the paper. This comment hopes to motivate a review of discriminant validity issues and offers assistance to future researchers conducting latent variable analysis

In vivo measurement of myocardial mass using nuclear magnetic resonance imaging

To examine the accuracy of nuclear magnetic resonance imaging in measuring left ventricular mass, measurements of left ventricular mass made using this technique were compared with left ventricular weight in 10 mongrel dogs. Left ventricular myocardial volume was measured from five short-axis ehd-diastolic images that spanned the left ventricle. Left ventricular mass was calculated from left ventricular myocardial volume and compared with the left ventricular weight determined after formalin immersion-fixation.Linear regression analysis yielded the following relation in grams: left ventricular mass determined using nuclear magnetic resonance imaging = (0.94) (left ventricular weight) + 9.1 (r = 0.98, SEE = 6.1 g). The small overestimation of left ventricular weight by nuclear magnetic resonance imaging was judged to be secondary to both difficulty with proper border definition and partial volume effects. Hence, this imaging technique can be used to obtain accurate measurements of left ventricular mass in dogs in vivo

The sweet spot in sustainability: a framework for corporate assessment in sugar manufacturing

The assessment of corporate sustainability has become an increasingly important topic, both within academia and in industry. For manufacturing companies to conform to their commitments to sustainable development, a standard and reliable measurement framework is required. There is, however, a lack of sector-specific and empirical research in many areas, including the sugar industry. This paper presents an empirically developed framework for the assessment of corporate sustainability within the Thai sugar industry. Multiple case studies were conducted, and a survey using questionnaires was also employed to enhance the power of generalisation. The developed framework is an accurate and reliable measurement instrument of corporate sustainability, and guidelines to assess qualitative criteria are put forward. The proposed framework can be used for a company’s self-assessment and for guiding practitioners in performance improvement and policy decision-maki

Redesign and initial validation of an instrument to assess the motivational qualities of music in exercise: The Brunel Music Rating Inventory-2

In the present study, a measure to assess the motivational qualities of music in exercise was redesigned, extending previous research efforts (Karageorghis et al., 1999). The original measure, the Brunel Music Rating Inventory (BMRI), had shown limitations in its factor structure and its applicability to non-experts in music selection. Redesign of the BMRI used in-depth interviews with eight participants (mean age 31.9 years, s¼8.9 years) to establish the initial item pool, which was examined using a series of confirmatory factor analyses. A single-factor model provided a good fit across three musical selections with different motivational qualities (comparative fit index, CFI: 0.95 – 0.98; standardized root mean residual, SRMR: 0.03 – 0.05). The single-factor model also demonstrated acceptable fit across two independent samples and both sexes using one piece of music (CFI: 0.86 – 1.00; SRMR: 0.04 – 0.07). The BMRI was designed for experts in selecting music for exercise (e.g. dance aerobic instructors), whereas the BMRI-2 can be used both by exercise instructors and participants. The psychometric properties of the BMRI-2 are stronger than those of the BMRI and it is easier to use. The BMRI-2 provides a valid and internally consistent tool by which music can be selected to accompany a bout of exercise or a training session. Furthermore, the BMRI-2 enables researchers to standardize music in experimental protocols involving exercise-related tasks

Measuring the Intrapersonal Component of Psychological Empowerment: Confirmatory Factor Analysis of the Sociopolitical Control Scale

The Sociopolitical Control Scale (SPCS) is a widely used measure of the intrapersonal component of psychological empowerment. Confirmatory factor analyses (CFA) were conducted with data from two samples to test the hypothesized structure of the SPCS, the potential effects of method bias on the measure's psychometric properties, and whether a revised version of the scale (SPCS‐R) yielded improved model fit. Sample 1 included 316 randomly selected community residents of the Midwestern United States. Sample 2 included 750 community residents of the Northeastern U.S. Results indicated that method bias from the use of negatively worded items had a significant effect on the factor structure of the SPCS. CFA of the SPCS‐R, in which negatively worded items were rephrased so that all statements were positively worded, supported the measure's hypothesized two‐factor structure (i.e., leadership competence and policy control). Subscales of the SPCS‐R were found reliable and related in expected ways with measures of community involvement. Implications of the study for empowerment‐based research and practice are described, and strategies to further develop the SPCS are discussed.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/117223/1/ajcp9070.pd

Development and validation of a visual grading scale for assessing image quality of AP pelvis radiographic images

OBJECTIVE: Apply psychometric theory to develop and validate a visual grading scale for assessing visual perception of AP pelvis digital image quality. METHODS: Psychometric theory was used to guide scale development. Seven phantom and 7 cadaver images of visually and objectively predetermined quality were used to help assess scale reliability and validity. 151 volunteers scored phantom images; 184 volunteers scored cadaver images. Factor analysis and Cronbach’s alpha were used to assess scale validity and reliability. RESULTS: A 24 item scale was produced. Aggregated mean volunteer scores for each image correlated with the rank order of the visually and objectively predetermined image qualities. Scale items had good inter-item correlation (≥0.2) and high factor loadings (≥0.3). Cronbach's alpha (reliability) revealed that the scale has acceptable levels of internal reliability for both phantom and cadaver images (α= 0.8 and 0.9, respectively). Factor analysis suggested the scale is multidimensional (assessing multiple quality themes). CONCLUSION: This study represents the first full development and validation of a visual image quality scale using psychometric theory. It is likely that this scale will have clinical, training and research applications. ADVANCES IN KNOWLEDGE: This article presents data to create and validate visual grading scales for radiographic examinations. The visual grading scale, for AP pelvis examinations, can act as a validated tool for future research, teaching and clinical evaluations of image quality

The temporal reliability of serum estrogens, progesterone, gonadotropins, SHBG and urinary estrogen and progesterone metabolites in premenopausal women

BACKGROUND: There is little existing research to guide researchers in estimating the minimum number of measurement occasions required to obtain reliable estimates of serum estrogens, progesterone, gonadotropins, sex hormone-binding globulin (SHBG), and urinary estrogen and progesterone metabolites in premenopausal women. METHODS: Using data from a longitudinal study of 34 women with a mean age of 42.3 years (SD = 2.6), we calculated the minimum number of measurement occasions required to obtain reliable estimates of 12 analytes (8 in blood, 4 in urine). Five samples were obtained over 1 year: at baseline, and after 1, 3, 6, and 12 months. We also calculated the percent of true variance accounted for by a single measurement and intraclass correlation coefficients (ICC) between measurement occasions. RESULTS: Only 2 of the 12 analytes we examined, SHBG and estrone sulfate (E(1)S), could be adequately estimated by a single measurement using a minimum reliability standard of having the potential to account for 64% of true variance. Other analytes required from 2 to 12 occasions to account for 81% of the true variance, and 2 to 5 occasions to account for 64% of true variance. ICCs ranged from 0.33 for estradiol (E(2)) to 0.88 for SHBG. Percent of true variance accounted for by single measurements ranged from 29% for luteinizing hormone (LH) to 92% for SHBG. CONCLUSIONS: Experimental designs that take the natural variability of these analytes into account by obtaining measurements on a sufficient number of occasions will be rewarded with increased power and accuracy