Ultrasonic tomographic imaging of defects in industrial materials

Ultrasonic tomography has been fairly widely applied for imaging of inhomogeneities in isotropic materials, particularly in the medical field, however, little success has been made in its application to industrial materials. This is largely due to the complex nature of ultrasonic wave propagation in these anisotropic materials. The three dimensional characteristics of ultrasonic wave propagation in anisotropic materials have been thoroughly studied for single crystals and also studied recently for different composites [1,2,3]. Understanding these characteristics provides the theoretical background for developing appropriate ultrasonic tomographic imaging methods for industrial materials

Factors associated with tocolytic hospitalizations in Taiwan: evidence from a population-based and longitudinal study from 1997 to 2004

<p>Abstract</p> <p>Background</p> <p>The use of tocolytic hospitalization in antenatal care is controversial and worthy of more research. We investigated individual, institutional, and area factors that affect the use of tocolytic hospitalizations in Taiwan where fertility has rapidly declined.</p> <p>Methods</p> <p>Longitudinal data from the 1996 to 2004 National Health Insurance Research Database in Taiwan were used to identify tocolytic hospitalizations. The probit model was used to estimate factors associated with tocolytic hospitalizations.</p> <p>Results</p> <p>The decline in fertility was significantly associated with the probability of tocolytic hospitalizations. Several physician and institutional factors-including physician's age, hospital ownership, accreditation status, bed size, and teaching status-were also significantly correlated to the dependent variables.</p> <p>Conclusions</p> <p>The provision of inpatient tocolysis is influenced not only by clinical considerations but also by physician, institutional, and area factors unrelated to clinical need. Fertility declines in Taiwan may have led obstetricians/gynecologists to provide more tocolysis to make up for their lost income. If the explanation is further validated, reimbursement policies may need to be reviewed to correct for overuse of inpatient tocolysis. The correlation could also be explained by the increasing use of artificial reproductive technologies and higher social value of newborns. In addition, the physician and institutional variations observed in the study indicate potential misuse of inpatient tocolysis that warrant further investigation.</p

Nine weeks of supplementation with a multi-nutrient product augments gains in lean mass, strength, and muscular performance in resistance trained men

<p>Abstract</p> <p>Background</p> <p>The purpose of this study was to compare the effects of supplementation with Gaspari Nutrition's SOmaxP Maximum Performance™ (SOmaxP) versus a comparator product (CP) containing an equal amount of creatine (4 g), carbohydrate (39 g maltodextrin), and protein (7 g whey protein hydrolysate) on muscular strength, muscular endurance, and body composition during nine weeks of intense resistance training.</p> <p>Methods</p> <p>Using a prospective, randomized, double-blind design, 20 healthy men (mean ± SD age, height, weight, % body fat: 22.9 ± 2.6 y, 178.4 ± 5.7 cm, 80.5 ± 6.6 kg, 16.6 ± 4.0%) were matched for age, body weight, resistance training history, bench press strength, bench press endurance, and percent body fat and then randomly assigned via the ABBA procedure to ingest 1/2 scoop (dissolved in 15 oz water) of SOmaxP or CP prior to, and another 1/2 scoop (dissolved in 15 oz water) during resistance exercise. Body composition (DEXA), muscular performance (1-RM bench press and repetitions to failure [RTF: 3 sets × baseline body weight, 60-sec rest between sets]), and clinical blood chemistries were measured at baseline and after nine weeks of supplementation and training. Subjects were required to maintain their normal dietary habits and follow a specific, progressive overload resistance training program (4-days/wk, upper body/lower body split) during the study. An intent-to-treat approach was used and data were analyzed via ANCOVA using baseline values as the covariate. Statistical significance was set <it>a priori </it>at p ≤ 0.05.</p> <p>Results</p> <p>When adjusted for initial differences, significant between group post-test means were noted in: 1-RM bench press (SOmaxP: 133.3 ± 1.3 kg [19.8% increase] vs. CP: 128.5 ± 1.3 kg [15.3% increase]; p < 0.019); lean mass (SOmaxP: 64.1 ± 0.4 kg [2.4% increase] vs. 62.8 ± 0.4 kg [0.27% increase], p < 0.049); RTF (SOmaxP: 33.3 ± 1.1 reps [44.8% increase] vs. 27.8 ± 1.1 reps [20.9% increase], p < 0.004); and fat mass (SOmaxP: 12.06 ± 0.53 kg [9.8% decrease] vs. 13.90 ± 0.53 kg [4.1% increase], p < 0.024). No statistically significant differences in vital signs (heart rate, systolic and diastolic blood pressures) or clinical blood chemistries were noted.</p> <p>Conclusions</p> <p>These data indicate that compared to CP, SOmaxP administration augments and increases gains in lean mass, bench press strength, and muscular performance during nine weeks of intense resistance training. Studies designed to confirm these results and clarify the molecular mechanisms by which SOmaxP exerts the observed salutary effects have begun. Both SOmaxP and the CP were well-tolerated, and no supplement safety issues were identified.</p

A longitudinal investigation of psychological morbidity in patients with ovarian cancer

Ovarian cancer patients may experience psychological disorders due to the aggressive nature of the illness and treatment. We investigated the presence of psychological disorders longitudinally in women with a new diagnosis of ovarian cancer and the factors that predicted development and maintenance of these disorders. Patients were assessed in a prospective longitudinal study at the beginning of chemotherapy treatment, mid-treatment, end of treatment and 3 months follow-up for depression, anxiety, perceived social support, neuroticism and cognitive strategies to control unwanted thoughts. A total of 121 patients were recruited and 85 patients were assessed at all four time points. Three different longitudinal profiles of anxiety and depression caseness were found: non-cases (never cases), occasional cases (cases on at least one but not all four occasions) and stable cases (cases on all four occasions). Most of the women were occasional cases of anxiety (52%, 44), whereas for depression, the majority of women were non-cases (55%, 47). A subset of patients were stable cases of anxiety (22%, 19). Neuroticism and marital status were significant independent predictors of anxiety caseness profile. Neuroticism and use of anti-depressants were independent predictors of depression caseness profile. Social support was not related to psychological morbidity

Can the outcome of pelvic-floor rehabilitation in patients with fecal incontinence be predicted?

Purpose: Pelvic-floor rehabilitation does not provide the same degree of relief in all fecal incontinent patients. We aimed at studying prospectively the ability of tests to predict the outcome of pelvic-floor rehabilitation in patients with fecal incontinence. Materials and methods: Two hundred fifty consecutive patients (228 women) underwent medical history and a standardized series of tests, including physical examination, anal manometry, pudendal nerve latency testing, anal sensitivity testing, rectal capacity measurement, defecography, endoanal sonography, and endoanal magnetic resonance imaging. Subsequently, patients were referred for pelvic-floor rehabilitation. Outcome of pelvic-floor rehabilitation was quantified by the Vaizey incontinence score. Linear regression analyses were used to identify candidate predictors and to construct a multivariable prediction model for the posttreatment Vaizey score. Results: After pelvic-floor rehabilitation, the mean baseline Vaizey score (18, SD±3) was reduced with 3.2 points (p<0.001). In addition to the baseline Vaizey score, three elements from medical history were significantly associated with the posttreatment Vaizey score (presence of passive incontinence, thin stool consistency, primary repair of a rupture after vaginal delivery at childbed) (R2, 0.18). Th

Histone Deacetylase Activity Modulates Alternative Splicing

There is increasing evidence to suggest that splicing decisions are largely made when the nascent RNA is still associated with chromatin. Here we demonstrate that activity of histone deacetylases (HDACs) influences splice site selection. Using splicing-sensitive microarrays, we identified ∼700 genes whose splicing was altered after HDAC inhibition. We provided evidence that HDAC inhibition induced histone H4 acetylation and increased RNA Polymerase II (Pol II) processivity along an alternatively spliced element. In addition, HDAC inhibition reduced co-transcriptional association of the splicing regulator SRp40 with the target fibronectin exon. We further showed that the depletion of HDAC1 had similar effect on fibronectin alternative splicing as global HDAC inhibition. Importantly, this effect was reversed upon expression of mouse HDAC1 but not a catalytically inactive mutant. These results provide a molecular insight into a complex modulation of splicing by HDACs and chromatin modifications

Search for high-mass resonances decaying to dilepton final states in pp collisions at s√=7 TeV with the ATLAS detector

The ATLAS detector at the Large Hadron Collider is used to search for high-mass resonances decaying to an electron-positron pair or a muon-antimuon pair. The search is sensitive to heavy neutral Z′ gauge bosons, Randall-Sundrum gravitons, Z * bosons, techni-mesons, Kaluza-Klein Z/γ bosons, and bosons predicted by Torsion models. Results are presented based on an analysis of pp collisions at a center-of-mass energy of 7 TeV corresponding to an integrated luminosity of 4.9 fb−1 in the e + e − channel and 5.0 fb−1 in the μ + μ −channel. A Z ′ boson with Standard Model-like couplings is excluded at 95 % confidence level for masses below 2.22 TeV. A Randall-Sundrum graviton with coupling k/MPl=0.1 is excluded at 95 % confidence level for masses below 2.16 TeV. Limits on the other models are also presented, including Technicolor and Minimal Z′ Models

Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal