Sclerite formation in the hydrothermal-vent “scaly-foot” gastropod — possible control of iron sulfide biomineralization by the animal

A gastropod from a deep-sea hydrothermal field at the Rodriguez triple junction, Indian Ocean, has scale-shaped structures, called sclerites, mineralized with iron sulfides on its foot. No other organisms are known to produce a skeleton consisting of iron sulfides. To investigate whether iron sulfide mineralization is mediated by the gastropod for the function of the sclerites, we performed a detailed physical and chemical characterization. Nanostructural characterization of the iron sulfide sclerites reveals that the iron sulfide minerals pyrite (FeS2) and greigite (Fe3S4) form with unique crystal habits inside and outside of the organic matrix, respectively. The magnetic properties of the sclerites, which are mostly consistent with those predicted from their nanostructual features, are not optimized for magnetoreception and instead support use of the magnetic minerals as structural elements. The mechanical performance of the sclerites is superior to that of other biominerals used in the vent environment for predation as well as protection from predation. These characteristics, as well as the co-occurrence of brachyuran crabs, support the inference that the mineralization of iron sulfides might be controlled by the gastropod to harden the sclerites for protection from predators. Sulfur and iron isotopic analyses indicate that sulfur and iron in the sclerites originate from hydrothermal fluids rather than from bacterial metabolites, and that iron supply is unlikely to be regulated by the gastropod for iron sulfide mineralization. We propose that the gastropod may control iron sulfide mineralization by modulating the internal concentrations of reduced sulfur compounds

Reproducibility of Non-X-ray Background for the X-ray Imaging Spectrometer aboard Suzaku

One of the advantages of the X-ray Imaging Spectrometer (XIS) system on board Suzaku is its low and stable non-X-ray background (NXB). In order to make the best use of this advantage, modeling the NXB spectra with high accuracy is important to subtract them from the spectra of on-source observations. We construct an NXB database by collecting XIS events when the dark Earth covers the XIS FOV. The total exposure time of the NXB data is about 785 ks for each XIS. It is found that the count rate of the NXB anti-correlates with the cut-off-rigidity and correlates with the count rate of the PIN upper discriminator (PIN-UD) in Hard X-ray Detector on board Suzaku. We thus model the NXB spectrum for a given on-source observation by employing either of these parameters and obtain a better reproducibility of the NXB for the model with PIN-UD than that with the cut-off-rigidity. The reproducibility of the NXB model with PIN-UD is 4.55-5.63% for each XIS NXB in the 1-7 keV band and 2.79-4.36% for each XIS NXB in the 5-12 keV band for each 5 ks exposure of the NXB data. This NXB reproducibility is much smaller than the spatial fluctuation of the cosmic X-ray background in the 1-7 keV band, and is almost comparable to that in the 5-12 keV band.Comment: 25 pages, 13 figures, accepted for publication in PASJ (Suzaku Special Issue

Bone microarchitectural analysis using ultra-high-resolution CT in tiger vertebra and human tibia

Background To reveal trends in bone microarchitectural parameters with increasing spatial resolution on ultra-high-resolution computed tomography (UHRCT) in vivo and to compare its performance with that of conventional-resolution CT (CRCT) and micro-CT ex vivo. Methods We retrospectively assessed 5 tiger vertebrae ex vivo and 16 human tibiae in vivo. Seven-pattern and four-pattern resolution imaging were performed on tiger vertebra using CRCT, UHRCT, and micro-CT, and on human tibiae using UHRCT. We measured six microarchitectural parameters: volumetric bone mineral density (vBMD), trabecular bone volume fraction (bone volume/total volume, BV/TV), trabecular thickness (Tb.Th), trabecular number (Tb.N), trabecular separation (Tb.Sp), and connectivity density (ConnD). Comparisons between different imaging resolutions were performed using Tukey or Dunnett T3 test. Results The vBMD, BV/TV, Tb.N, and ConnD parameters showed an increasing trend, while Tb.Sp showed a decreasing trend both ex vivo and in vivo. Ex vivo, UHRCT at the two highest resolutions (1024- and 2048-matrix imaging with 0.25-mm slice thickness) and CRCT showed significant differences (p <= 0.047) in vBMD (51.4 mg/cm(3) and 63.5 mg/cm(3)versus 20.8 mg/cm(3)), BV/TV (26.5% and 29.5% versus 13.8 %), Tb.N (1.3 l/mm and 1.48 l/mm versus 0.47 l/mm), and ConnD (0.52 l/mm(3) and 0.74 l/mm(3)versus 0.02 l/mm(3), respectively). In vivo, the 512- and 1024-matrix imaging with 0.25-mm slice thickness showed significant differences in Tb.N (0.38 l/mm versus 0.67 l/mm, respectively) and ConnD (0.06 l/mm(3)versus 0.22 l/mm(3), respectively). Conclusions We observed characteristic trends in microarchitectural parameters and demonstrated the potential utility of applying UHRCT for microarchitectural analysis

Hot electron and ion spectra on blow-off plasma free target in GXII-LFEX direct fast ignition experiment

Polystyrene deuteride shell targets with two holes were imploded by the Gekko XII laser and additionally heated by the LFEX laser in a direct fast ignition experiment. In general, when an ultra-intense laser is injected into a blow-off plasma created by the imploding laser, electrons are generated far from the target core and the energies of electrons increase because the electron acceleration distance has been extended. The blow-off plasma moves not only to the vertical direction but to the lateral direction against the target surface. In a shell target with holes, a lower effective electron temperature can be realized by reducing the inflow of the implosion plasma onto the LFEX path, and high coupling efficiency can be expected. The energies of hot electrons and ions absorbed into the target core were calculated from the energy spectra using three electron energy spectrometers and a neutron time-of-flight measurement system, Mandala. The ions have a large contribution of 74% (electron heating of 4.9 J and ion heating of 14.1 J) to target heating in direct fast ignition

Combined immunohistochemistry of β-catenin, cytokeratin 7, and cytokeratin 20 is useful in discriminating primary lung adenocarcinomas from metastatic colorectal cancer

BACKGROUND: It is important to discriminate between primary and secondary lung cancer. However, often, the discriminating diagnosis of primary lung acinar adenocarcinoma and lung metastasis of colorectal cancer based on morphological and pathological findings is difficult. The purpose of this study was to evaluate the clinical usefulness of immunohistochemistry of β-catenin, cytokeratin (CK) 7, and CK20 for the discriminating diagnosis of lung cancer. METHODS: We performed immunohistochemistry of β-catenin, CK7, and CK20 in 19 lung metastasis of colorectal cancer samples, 10 corresponding primary colorectal cancer samples and 11 primary lung acinar adenocarcinoma samples and compared the levels of accuracy of the discriminating diagnosis by using antibodies against these antigens. RESULTS: Positive staining of β-catenin was observed in all the lung metastasis of colorectal cancer samples as well as in the primary colorectal cancer samples but in none of the primary lung acinar adenocarcinoma samples. Positive staining of CK7 was observed in 90.9% of the primary lung acinar adenocarcinoma samples and in 5.3% of the lung metastasis of colorectal cancer samples, but in none of the primary colorectal cancer samples. Positive staining of CK20 was observed in all the primary colorectal cancer samples and in 84.2% of the lung metastasis of colorectal cancer samples, but in none of the primary lung acinar adenocarcinoma samples. CONCLUSION: Combined immunohistochemistry of β-catenin, CK7, and CK20 is useful for making a discriminating diagnosis between lung metastasis of colorectal cancer and primary lung acinar adenocarcinoma. This method will enable accurate diagnosis of a lung tumor and will be useful for selecting appropriate therapeutic strategies, including chemotherapeutic agents and operation methods

The Physics of the B Factories

This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C

Room-temperature thermally induced relaxation effect in a two-dimensional cyano-bridged Cu-Mo bimetal assembly and thermodynamic analysis of the relaxation process

We observed a photo-switching effect in [CuII(1,4,8,11-tetraazacyclodecane)]2[MoIV(CN)8]·10H2O by irradiation with 410-nm light around room temperature using infrared spectroscopy. This photo-switching is caused by the photo-induced charge transfer from MoIV to CuII. The photo-induced phase thermally relaxed to the initial phase with a half-life time of 2.7 × 101, 6.9 × 101, and 1.7 × 102 s at 293, 283, and 273 K, respectively. The relaxation process was analyzed using Hauser's equation, k = k0exp[−(Ea + Ea*γ) / kBT], where k is the rate constant of relaxation, k0 is the frequency factor, Ea is the activation energy, Ea* is the additional activation energy due to the cooperativity, and γ is the fraction of the photo-induced phase. k0, Ea, and Ea* were evaluated as 1.28 × 107 ± 2.6 s−1, 4002 ± 188 cm−1, and 546 ± 318 cm−1, respectively. The value of Ea is much larger than that of the relaxation process for the typical light-induced spin crossover effect (Ea ≈ 1000 cm−1). Room-temperature photo-switching is an important issue in the field of optical functional materials. The present system is useful for the demonstration of high-temperature photo-switching material