Formulation of polyphthalaldehyde microcapsules for immediate UV-light triggered release

Triggered release from responsive drug reservoirs activated by remote stimuli is desired in a range of fields. Critical bottlenecks are cost-efficient formulation avenues applicable for industrial scale-up, viable triggers and immediate release rather than continuous release upon activation. UV-sensitive microcapsules based on self-immolating polymers in combination with thin shells and morphological weak spots should allow for immediate triggered release. Polyphthalaldehyde-based microcapsules were prepared using several variations of the internal phase separation route. In addition, a fluorescence microscopy method was developed to study both the microcapsule morphology and the triggered release in-situ. The microcapsule formation was driven by the surface activity of the stabilizer, effectively lowering the high polymer-water interfacial tension, which is in sharp contrast to conventional encapsulation systems. Contrary to previous findings, a core–shell morphology was obtained via slow emulsion-to-suspension transformation. Rapid transformation captured intermediate inverted core–shell structures. The capsules were highly sensitive to both acid- and UV-mediated triggers, leading to an unzipping and rupturing of the shell that released the core content. Poly(methacrylic acid)-stabilized microcapsules displayed immediate UV-triggered release provided by their stimuli-sensitive blueberry morphology. Both capsules in aqueous and dry environment started to lose their core content after less than one minute of UV light exposure

Clouding observed for surface active, mPEG-grafted silica nanoparticles

Temperature-dependent phase-separation, clouding, has been observed in suspensions of silica nanoparticles surface-functionalized with methyl-poly(ethylene glycol) silane. Interparticle interactions and conformational changes of the grafted poly(ethylene glycol) chains influence the observed cloud points, and can be controlled by electrolyte concentration and pH. These findings open new routes to tailoring properties of Pickering emulsions

Interphase Design of Cellulose Nanocrystals/Poly(hydroxybutyrate- ran-valerate) Bionanocomposites for Mechanical and Thermal Properties Tuning

Poly[(3-hydroxybutyrate)-ran-(3-hydroxyvalerate)] (PHBV) is a bacterial polyester with a strong potential as a substitute for oil-based thermoplastics due to its biodegradability and renewability. However, its inherent slow crystallization rate limits its thermomechanical properties and therefore its applications. In this work, surface-modified cellulose nanocrystals (CNCs) have been investigated as green and biosourced nucleating and reinforcing agent for PHBV matrix. Different ester moieties from the CNCs were thereby produced through a green one-pot hydrolysis/Fisher esterification. Beyond the improved dispersion, the CNCs surface esterification affected the thermal and thermomechanical properties of PHBV. The results demonstrate that butyrate-modified CNCs, mimicking the PHBV chemical structure, brought a considerable improvement toward the CNCs/matrix interface, leading to an enhancement of the PHBV thermomechanical properties via a more efficient stress transfer, especially above its glass transition

Methane Adsorption and Methanol Desorption for Copper Modified Boron Silicate

Boron silicate (BS) with a chabazite framework structure was synthesised using a direct route and rigorously characterized before it was ion-exchanged with copper to form Cu-BS. Employing in situ infrared spectroscopy, we show that Cu-BS is capable of oxidising methane to methoxy species and methanol interacts with the boron sites without deprotonation

A long-chain protic ionic liquid inside silica nanopores: Enhanced proton mobility due to efficient self-assembly and decoupled proton transport

We report enhanced protonic and ionic dynamics in an imidazole/protic ionic liquid mixture confined within the nanopores of silica particles. The ionic liquid is 1-octylimidazolium bis(trifluoromethanesulfonyl)imide ([HC8Im][TFSI]), while the silica particles are microsized and characterized by internal well connected nanopores. We demonstrate that the addition of imidazole is crucial to promote a proton motion decoupled from molecular diffusion, which occurs due to the establishment of new N-H⋯N hydrogen bonds and fast proton exchange events in the ionic domains, as evidenced by both infrared and1H NMR spectroscopy. An additional reason for the decoupled motion of protons is the nanosegregated structure adopted by the liquid imidazole/[HC8Im][TFSI] mixture, with segregated polar and non-polar nano-domains, as clearly shown by WAXS data. This arrangement, promoted by the length of the octyl group and thus by significant chain-chain interactions, reduces the mobility of molecules (Dmol) more than that of protons (DH), which is manifested by DH/Dmolratios greater than three. Once included into the nanopores of hydrophobic silica microparticles, the nanostructure of the liquid mixture is preserved with slightly larger ionic domains, but effects on the non-polar ones are unclear. This results in a further enhancement of proton motion with localised paths of conduction. These findings demonstrate significant progress in the design of proton conducting materials via tailor-made molecular structures as well as by smart exploitation of confinement effects. Compared to other imidazole-based proton conducting materials that are crystalline up to 90 \ub0C or above, the gel materials that we propose are useful for applications at room temperature, and can thus find applications in e.g. intermediate temperature proton exchange fuel cells

The use of nano/micro-layers, self-healing and slow release coatings to prevent corrosion and biofouling

The mitigation of corrosion and biofouling is a challenge. Through application of chemicals and special techniques can slow these undesired processes, an effective resolution requires a multidisciplinary approach involving scientists, engineers, and metallurgists. In order to understand the importance of the use of nano- and microlayers as well as self-healing coatings, the basic concepts of corrosion, corrosion mechanisms, corrosion inhibition and the microbiologically influenced corrosion will be summarised. The preparation, characterization and application of Langmuir-Blodgett and self assembled nanolayers in corrosive and microbial environment will be discussed. Preparation and characterization of microcapsules/ microspheres and their application in coatings will be demonstrated by a number of examples

Molecular Association Studied by NMR Spectroscopy

This Thesis presents studies of molecular association in aqueous solution and at the liquid/solid interface. The investigated molecular systems range from self-aggregating surfactants to hydration water in contact with micelles or individual molecules. In most studies, combinations of various NMR methods were applied. These vary from simple chemical shift and intensity measurements to more elaborate self-diffusion and intermolecular cross-relaxation experiments. Non-ideal mixed micelles of fluorinated and hydrogenated surfactants were studied by an experimental procedure that allows an analysis in terms of micellar structure, using a minimal number of initial assumptions. Quantitative conclusions about micro-phase separation within mixed micelles were obtained within the framework of the regular solution theory. Additionally, NMR was introduced and developed as a powerful method for studying adsorption of surfactants at solid interfaces. Adsorption isotherms for pure and mixed surfactant systems and non-ideal mixing behavior of fluorinated and hydrogenated surfactants at solid surfaces were quantified. Fluorosurfactant-protein association was investigated using the methods described. Intermolecular cross-relaxation rates between solute and solvent molecules were recorded at several different magnetic fields. The results reveal strong frequency dependence for both small molecules and micelles. This finding demonstrates that intermolecular cross-relaxation is not solely controlled by fast local motions, but also by long-range translational dynamics. Data analysis in terms of recently developed relaxation models provides information about the hydrophobic hydration and micellar structure.QC 2010091

An investigation of the sol-gel process in ionic liquid/silica gels by time resolved Raman and 1H NMR spectroscopy

We report, by employing time resolved Raman and nuclear magnetic resonance (NMR) spectroscopy, on the gelation process in ionogels. These are prepared from a non-aqueous sol–gel reaction in the ionic liquid 1-hexyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (C1C6ImTFSI). Raman and NMR spectroscopies are complementarily used to decipher the chemical reactions that occur during synthesis and to clarify the state of the ionic liquid up to, and well beyond, gelation. We find that the ionic liquid concentration affects both the reaction rate and the gelation time (tgel). In addition, NMR and Raman data reveal inherently different roles of the cation and the anion in the gelation process. While the oscillating behavior of the TFSI Raman signature at 740 cm−1 is mainly an effect of solvation and chemical composition, the evolution of the relative chemical shifts (Δδ) of different hydrogen atoms on the imidazolium correlates with gelation, as does the width of the chemical shift of –OH containing groups (δOH). We also observe that in the confined state the TFSI anion preferably adopts the cisoid conformation and experiences a stronger ion–ion interaction

Dissolution and Gelation of Cellulose in TBAF/DMSO Solutions: The Roles of Fluoride Ions and Water

Solutions of cellulose in a mixture of tetrabutylammonium fluoride and dimethyl sulfoxide (TBAF/DMSO) containing small and varying amounts of water were studied by nuclear magnetic resonance (NMR). By measuring the composition dependences of 19F NMR and 1H NMR chemical shifts and line widths, details on the dissolution and gelation mechanisms for cellulose in TBAF/DMSO were elucidated. Our results suggest that the strongly electronegative fluoride ions act as hydrogen bond acceptors to cellulose hydroxyl groups, thus dissolving the polymer by breaking the cellulose−cellulose hydrogen bonds and by rendering the chains an effective negative charge. It was found that the fluoride ions also interact strongly with water. Small amounts of water remove the fluoride ions from the cellulose chains and allow reformation of the cellulose−cellulose hydrogen bonds, which leads to formation of highly viscous solutions or gels even at low cellulose concentrations