Production of He-4 and (4) in Pb-Pb collisions at root(NN)-N-S=2.76 TeV at the LHC

Results on the production of He-4 and (4) nuclei in Pb-Pb collisions at root(NN)-N-S = 2.76 TeV in the rapidity range vertical bar y vertical bar <1, using the ALICE detector, are presented in this paper. The rapidity densities corresponding to 0-10% central events are found to be dN/dy4(He) = (0.8 +/- 0.4 (stat) +/- 0.3 (syst)) x 10(-6) and dN/dy4 = (1.1 +/- 0.4 (stat) +/- 0.2 (syst)) x 10(-6), respectively. This is in agreement with the statistical thermal model expectation assuming the same chemical freeze-out temperature (T-chem = 156 MeV) as for light hadrons. The measured ratio of (4)/He-4 is 1.4 +/- 0.8 (stat) +/- 0.5 (syst). (C) 2018 Published by Elsevier B.V.Peer reviewe

Redetermination of Na3TaF8

The crystal structure of trisodium octafluoridotantalate,Na3TaF8, has been redetermined using diffractometer data collected at 153 K, resulting in more accurate bond distances and angles than obtained from a previous structure determination based on film data. The structure is built from layers running along [101], which are formed by distorted [TaF8] antiprisms and [NaF6] rectangular bipyramids sharing edgesand corners. The individual layers are separated by eightcoordinated Na ions. Two atoms in the asymmetric unit are in special positions: the Ta atom is on a twofold axis in Wyckoff position 4e and one of the Na ions lies on an inversion centre in Wyckoff site 4d

Dipotassium heptafluorotantalate(V), &#946-K2TaF7, at 509 K

Upon heating to 509 K, monoclinic &#945-K2TaF7 (P21/c) transforms to orthorhombic &#946-K2TaF7 (Pnma) which is composed of discrete K+ cations and TaF72- anions. In the anion, the Ta atom is sevenfold coordinated by F atoms, with the Ta-F distance varying from 1.88(2) to 1.965(19) \uc5. The two independent K+ cations are surrounded by F atoms positioned within 2.740(17)-2.979(10) and 2.989(17)-3.15(5) \uc5. Ta, both K and one of the four F atoms are located on a mirror plane, Wyckoff position 4c

Developing countries and emergency safeguard measures in world trade law

The physicochemical behavior of the molten system (LiF (1) + CaF2 (2))eut + LaF3 (3) has been studied and the phase equilibria, density and volume properties, electrical conductivity, and surface tension have been selected for investigation. Well-established methods for determination of these physicochemical properties of molten salts have been used, such as thermal analysis, the Archimedean method of hydrostatic weighing, and the phase shift and maximum bubble pressure methods. A significant change in all investigated properties was detected in the region of x3 = 0.04–0.06. In regard to phase equilibria, this region is close to and may contain the eutectic point; in volumetric properties, the initial volume contraction (on increasing mol %) starts to reverse. A sharp change of electrical conductivity reflects the changes in ionic composition, and surface tension also shows different behavior below and above this region

Corrosion Behavior of Incoloy^®800H, Hastelloy^®G35^® and 316L Stainless Steel in the Molten Eutectic Fluoride Mixture FLiNaK and Its Vapors

This paper discusses the findings of a corrosion experiment which investigates a transition area which is between the lower area and upper area of the sample. In this experiment, the lower half of the sample surface is exposed to molten salt and the upper half of the sample surface is exposed to the vapors generated by molten FLiNak salt. Incoloy®800H and Hastelloy®G35® alloys and 316L stainless steel were selected for the corrosion experiment on the basis of their Cr content. The experiment was conducted at 600 °C for a period of 100 h. The results of the experiment show that, in the transition area, no abrupt change in corrosion mechanism takes place; the experiments also give us information on how the degree of degradation varies across the three areas of the samples. The experiment also showed two distinct corrosion mechanisms operating in the test samples: intergranular corrosion in the SS316L stainless steel test sample and continuous corrosion in Hastelloy®G35®. The results also show a progressive reduction in the concentrations of F, K and Na in the upper areas compared to the lower areas for Hastelloy©G35®. Cr is shown to have a critical role in the corrosion process, even when the sample surface is not in direct contact with the molten salt and is only in contact with the vapors generated by the molten salt