rf traveling-wave electron gun for photoinjectors

The design of a photoinjector, in particular that of the electron source, is of central importance for free electron laser (FEL) machines where a high beam brightness is required. In comparison to standard designs, an rf traveling-wave photocathode gun can provide a more rigid beam with a higher brightness and a shorter pulse. This is illustrated by applying a specific optimization procedure to the SwissFEL photoinjector, for which a brightness improvement up to a factor 3 could be achieved together with a double gun output energy compared to the reference setup foreseeing a state-of-the-art S-band rf standing-wave gun. The higher brightness is mainly given by a (at least) double peak current at the exit of the gun which brings benefits for both the beam dynamics in the linac and the efficiency of the FEL process. The gun design foresees an innovative coaxial rf coupling at both ends of the structure which allows a solenoid with integrated bucking coil to be placed around the cathode in order to provide the necessary focusing right after emission

RF Design of Traveling-Wave Accelerating Structures for the FCC-ee Pre-injector Complex

The linacs of the FCC-ee (Future Circular Electron-Positron Collider) injector complex will provide the drive beam for positron production and accelerate nominal electron and positron beams up to 6 GeV. Several linacs comprise different traveling-wave (TW) accelerating structures fulfilling the beam dynamics and rf constraints. Notably, high-phase advance large-aperture structures accelerate the positron beam at low energies. All TW structures are rotationally symmetric for easier production. Long-range wakes are damped by HOM detuning. Operating mode and HOM parameters were calculated based on lookup tables and analytic formulas, allowing for rapid scanning of large parameter spaces. In this paper, we present both methodology and realization of the rf design of the TW structures including their pulse compressors

Heart rate elevations during early sepsis predict death in fluid-resuscitated rats with fecal peritonitis

Abstract Background In sepsis, early outcome prediction would allow investigation of both adaptive mechanisms underlying survival and maladaptive mechanisms resulting in death. The aim of this study was to test whether early changes in heart rate monitored by telemetry could predict outcome in a long-term rat model of fecal peritonitis. Methods Male Wistar rats (n = 24) were instrumented with a central venous line for administration of fluids, antibiotics and analgesics. A telemetry transmitter continuously collected electrocardiogram signals. Sepsis was induced by intraperitoneal injection of fecal slurry, and the animals were observed for 48 h. Additional animals underwent arterial cannulation at baseline (n = 9), 4 h (n = 16), or 24 h (n = 6) for physiology and laboratory measurements. Results 48-h mortality was 33% (8/24), with all deaths occurring between 4 and 22 h. Septic animals were characterized by lethargy, fever, tachycardia, positive blood cultures, and elevated cytokine (IL-1, IL-6, TNF alpha) levels. An increase in heart rate ≥ 50 bpm during the first 4 h of sepsis predicted death with sensitivity and specificity of 88% (p = 0.001). Conclusions In this long-term rat sepsis model, prognostication could be made early by telemetry-monitored changes in heart rate. This model enables the study of underlying mechanisms and the assessment of any differential effects of novel therapies in predicted survivors or non-survivors

Update on the FCC-ee positron source design studies

International audienceThe studies and R&D on the high-intensity positron source for the FCC-ee have been initiated for a while. The positrons are produced by a 6 GeV electron drive-beam incident on a target-converter at 200 Hz. The drive beam comes in 2 bunches spaced by 25 ns with a maximum charge of ~5 nC per bunch. Two scenarios using conventional and hybrid targets are being studied for positron production. According to the FCC CDR, the Flux Concentrator is used as the matching device for the capture system, followed by several accelerating structures embedded in the solenoidal field. Then, the positrons are further accelerated to be injected into the damping ring. Recently, the feasibility study on using a SC solenoid for the positron capture has been started, and the design based on the HTS technology is under investigation. In addition, the large aperture 2 GHz RF structures, which have been specially designed for the FCC-ee positron capture system, are used with the goal of demonstrating accepted positron yield values well beyond the values obtained with state-of-the-art positron sources. The purpose of this paper is to review the current status of the FCC-ee positron source design, highlighting the recent research into the positron production, capture system, primary acceleration, and injection into the damping ring

The FCCee Pre-Injector Complex

International audienceThe international FCC study group published in 2019 a Conceptual Design Report for an electron-positron collider with a centre-of-mass energy from 90 to 365 GeV with a beam currents of up to 1.4 A per beam. The high beam current of this collider create challenging requirements on the injection chain and all aspects of the linac need to be carefully reconsidered and revisited, including the injection time structure. The entire beam dynamics studies for the full linac, damping ring and transfer lines are major activities of the injector complex design. A key point is that any increase of positron production and capture efficiency reduces the cost and complexity of the driver linac, the heat and radiation load of the converter system, and increases the operational margin. In this paper we will give an overview of the status of the injector complex design and introduce the new layout that has been proposed by the study group working in the context of the CHART collaboration. In this framework, furthermore, we also present the preliminary studies of the FCC-ee positron source highlighting the main requirements and constraints

Measurement of the isolated diphoton cross-section in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The ATLAS experiment has measured the production cross-section of events with two isolated photons in the final state, in proton-proton collisions at sqrt(s) = 7 TeV. The full data set acquired in 2010 is used, corresponding to an integrated luminosity of 37 pb^-1. The background, consisting of hadronic jets and isolated electrons, is estimated with fully data-driven techniques and subtracted. The differential cross-sections, as functions of the di-photon mass, total transverse momentum and azimuthal separation, are presented and compared to the predictions of next-to-leading-order QCD.Comment: 15 pages plus author list (27 pages total), 9 figures, 2 tables, final version to appear in Physical Review