6,180 research outputs found
Micro-scale thermal analysis of energy storage in cement-based composites containing phase change materials (PCMS)
In the last decades, the use of smart components embedded inside cementitious materials, like Phase Change Material (PCM), has become a more and more attractive solution for saving energy and for providing a more efficient thermal comfortability to modern buildings. Present research running at the Institute of Construction and Building Materials (WiB) of TU-Darmstadt deals with the investigation of advanced coupling of two physical mechanisms represented by a heat problem and microstructural heterogeneities. The thermal response of such a composite system, along with occurring phase change phenomena, will be simulated at the microscale level. A virtual 3D porous microstructure with embedded PCMs, created with the available hydration model Hymostruc, provides a fundamental basis for the analysis of the morphological influence of PCMs on the effective thermal diffusion parameters. The work is aimed at investigating the influence of the morphological effect on the thermal effective properties of hydrating cement combined with Micro-encapsulated (M)-PCMs. Laboratory characterization of the PCMs was performed using a designated test set-up. The thermal performance of cement-based pastes with and without MPCMs were experimentally evaluated and used as benchmark for calibration purposes. Particularly, the obtained results combined with specific heat capacity of PCM-cement pastes and thermal conductivity measurements were taken as reference for validating the proposed numerical technique.Publicado en: Mecánica Computacional vol. XXXV, no. 41Facultad de Ingenierí
Potential Use of Bio-Oleogel as Phase Change Material
Two bio-oleogels were investigated. These materials were produced with a combination of canola and soybean oil with 4, 6, 8, and 10% of beeswax (by weight). Sensible heat storage capacity, melting parameters, and enthalpies were investigated by the differential scanning calorimetry (DSC) test. An ordinary DSC dynamic test was performed. Cycles of heating and cooling were performed, as well as tests with different heating rates. According to the results, the materials present a melting temperature between −16 to −12 °C and a total latent heat between 22.9 and 367.6 J/g. BC10 (canola oil with 10% beeswax) was the sample with the best performance, with a latent heat of 367.6 J/g and a melting temperature of −13.6 °C, demonstrating its possible use as a phase change material for cold storage
Pattern Recognition and Event Reconstruction in Particle Physics Experiments
This report reviews methods of pattern recognition and event reconstruction
used in modern high energy physics experiments. After a brief introduction into
general concepts of particle detectors and statistical evaluation, different
approaches in global and local methods of track pattern recognition are
reviewed with their typical strengths and shortcomings. The emphasis is then
moved to methods which estimate the particle properties from the signals which
pattern recognition has associated. Finally, the global reconstruction of the
event is briefly addressed.Comment: 101 pages, 58 figure
The Outer Tracker Detector of the HERA-B Experiment Part I: Detector
The HERA-B Outer Tracker is a large system of planar drift chambers with
about 113000 read-out channels. Its inner part has been designed to be exposed
to a particle flux of up to 2.10^5 cm^-2 s^-1, thus coping with conditions
similar to those expected for future hadron collider experiments. 13
superlayers, each consisting of two individual chambers, have been assembled
and installed in the experiment. The stereo layers inside each chamber are
composed of honeycomb drift tube modules with 5 and 10 mm diameter cells.
Chamber aging is prevented by coating the cathode foils with thin layers of
copper and gold, together with a proper drift gas choice. Longitudinal wire
segmentation is used to limit the occupancy in the most irradiated detector
regions to about 20 %. The production of 978 modules was distributed among six
different laboratories and took 15 months. For all materials in the fiducial
region of the detector good compromises of stability versus thickness were
found. A closed-loop gas system supplies the Ar/CF4/CO2 gas mixture to all
chambers. The successful operation of the HERA-B Outer Tracker shows that a
large tracker can be efficiently built and safely operated under huge radiation
load at a hadron collider.Comment: 28 pages, 14 figure
Determination of the Michel Parameters rho, xi, and delta in tau-Lepton Decays with tau --> rho nu Tags
Using the ARGUS detector at the storage ring DORIS II, we have
measured the Michel parameters , , and for
decays in -pair events produced at
center of mass energies in the region of the resonances. Using
as spin analyzing tags, we find , , , , and . In addition, we report
the combined ARGUS results on , , and using this work
und previous measurements.Comment: 10 pages, well formatted postscript can be found at
http://pktw06.phy.tu-dresden.de/iktp/pub/desy97-194.p
Aging Studies for the Large Honeycomb Drift Tube System of the Outer Tracker of HERA-B
The HERA-B Outer Tracker consists of drift tubes folded from polycarbonate
foil and is operated with Ar/CF4/CO2 as drift gas. The detector has to stand
radiation levels which are similar to LHC conditions. The first prototypes
exposed to radiation in HERA-B suffered severe radiation damage due to the
development of self-sustaining currents (Malter effect). In a subsequent
extended R&D program major changes to the original concept for the drift tubes
(surface conductivity, drift gas, production materials) have been developed and
validated for use in harsh radiation environments. In the test program various
aging effects (like Malter currents, gain loss due to anode aging and etching
of the anode gold surface) have been observed and cures by tuning of operation
parameters have been developed.Comment: 14 pages, 6 figures, to be published in the Proceedings of the
International Workshop On Aging Phenomena In Gaseous Detectors, 2-5 Oct 2001,
Hamburg, German
The Outer Tracker Detector of the HERA-B Experiment. Part II: Front-End Electronics
The HERA-B Outer Tracker is a large detector with 112674 drift chamber
channels. It is exposed to a particle flux of up to 2x10^5/cm^2/s thus coping
with conditions similar to those expected for the LHC experiments. The
front-end readout system, based on the ASD-8 chip and a customized TDC chip, is
designed to fulfil the requirements on low noise, high sensitivity, rate
tolerance, and high integration density. The TDC system is based on an ASIC
which digitizes the time in bins of about 0.5 ns within a total of 256 bins.
The chip also comprises a pipeline to store data from 128 events which is
required for a deadtime-free trigger and data acquisition system. We report on
the development, installation, and commissioning of the front-end electronics,
including the grounding and noise suppression schemes, and discuss its
performance in the HERA-B experiment
An NLO QCD analysis of inclusive cross-section and jet-production data from the ZEUS experiment
The ZEUS inclusive differential cross-section data from HERA, for charged and
neutral current processes taken with e+ and e- beams, together with
differential cross-section data on inclusive jet production in e+ p scattering
and dijet production in \gamma p scattering, have been used in a new NLO QCD
analysis to extract the parton distribution functions of the proton. The input
of jet data constrains the gluon and allows an accurate extraction of
\alpha_s(M_Z) at NLO;
\alpha_s(M_Z) = 0.1183 \pm 0.0028(exp.) \pm 0.0008(model)
An additional uncertainty from the choice of scales is estimated as \pm
0.005. This is the first extraction of \alpha_s(M_Z) from HERA data alone.Comment: 37 pages, 14 figures, to be submitted to EPJC. PDFs available at
http://durpdg.dur.ac.uk/hepdata in LHAPDFv
- …