426 research outputs found
On perfect fluid models in non-comoving observational spherical coordinates
We use null spherical (observational) coordinates to describe a class of
inhomogeneous cosmological models. The proposed cosmological construction is
based on the observer past null cone. A known difficulty in using inhomogeneous
models is that the null geodesic equation is not integrable in general. Our
choice of null coordinates solves the radial ingoing null geodesic by
construction. Furthermore, we use an approach where the velocity field is
uniquely calculated from the metric rather than put in by hand. Conveniently,
this allows us to explore models in a non-comoving frame of reference. In this
frame, we find that the velocity field has shear, acceleration and expansion
rate in general. We show that a comoving frame is not compatible with expanding
perfect fluid models in the coordinates proposed and dust models are simply not
possible. We describe the models in a non-comoving frame. We use the dust
models in a non-comoving frame to outline a fitting procedure.Comment: 8 pages, 1 figure. To appear in Phys.Rev.
Mechanical and microstructural properties of redispersible polymer-gypsum composites
Studies on gypsum modified by polymers have been conducted to assess the potential of improvement in the mechanical performance, water resistance and increasing the setting time, facilitating its handling. Gypsum-based compounds made with different additions of redispersible polymers were studied, such as: ethylene-vinyl acetate (EVA), vinyl acetate terpolymer, vinyl laurate and vinyl chloride (VA/VL/VC), and vinyl acetate and vinyl versatate (VA/VeoVA). The influence on setting time, microstructural formation and on the bending performance was assessed, as well as and compression of the hardened gypsum. The composites were prepared using a polymer concentration of 5% and 10%, and water/gypsum ratio of 0.6. The addition of the polymer decreased the structural robustness and change in the microstructure. We concluded that the reduction in the amount of water through additives may allow a more complete and robust training of gypsum crystals and compounds with better mechanical performance223COORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIOR - CAPESnão te
An optimally efficient technique for the solution of systems of nonlinear parabolic partial differential equations
This paper describes a new software tool that has been developed for the efficient solution of systems of linear and nonlinear partial differential equations (PDEs) of parabolic type. Specifically, the software is designed to provide optimal computational performance for multiscale problems, which require highly stable, implicit, time-stepping schemes combined with a parallel implementation of adaptivity in both space and time. By combining these implicit, adaptive discretizations with an optimally efficient nonlinear multigrid solver it is possible to obtain computational solutions to a very high resolution with relatively modest computational resources. The first half of the paper describes the numerical methods that lie behind the software, along with details of their implementation, whilst the second half of the paper illustrates the flexibility and robustness of the tool by applying it to two very different example problems. These represent models of a thin film flow of a spreading viscous droplet and a multi-phase-field model of tumour growth. We conclude with a discussion of the challenges of obtaining highly scalable parallel performance for a software tool that combines both local mesh adaptivity, requiring efficient dynamic load-balancing, and a multigrid solver, requiring careful implementation of coarse grid operations and inter-grid transfer operations in parallel
Computational modelling of multiscale, multiphase fluid mixtures with application to tumour growth
In this work we consider the discretization of a recently formulated (Collis et al., [22]) multiscale model for drug- and nutrient-limited tumour growth. The key contribution of this work is the proposal of a discontinuous Galerkin finite element scheme which incorporates a non-standard coupling across a singular surface, and the presentation of full details of a suitable discretization for the coupled flow and transport systems, such as that arising in Collis et al. [22] and other similar works. We demonstrate the application of the proposed discretizations via representative numerical experiments; furthermore, we present a short numerical study of convergence for the proposed microscale scheme, in which we observe optimal rates of convergence for sufficiently smooth data
Chagas' disease: IgA, IgM and IgG antibodies to T. cruzi amastigote, trypomastigote and epimastigote antigens in acute and in different chronic forms of the disease
Efeito da Gliricidia sepium sobre nutrientes do solo, microclima e produtividade do milho em sistema agroflorestal no Agreste Paraibano.
Gliricidia sepium é uma leguminosa arbórea que tem sido utilizada em sistemas em aléias no semi-árido nordestino por apresentar bom desenvolvimento em condições de estresse hídrico. Entretanto, há pouca informação disponível sobre o efeito da introdução dessa espécie nos agroecossistemas da região. No presente estudo, objetivou-se avaliar a influência da distância de plantas de Gliricidia sepium sobre características da cultura do milho e do solo e microclima no Agreste Paraibano. O estudo foi realizado no município de Esperança (PB), em área de 0,5 ha, onde, em 1996, foram plantadas fileiras de G. sepium espaçadas 6 m entre si e com 1 m entre as árvores. Nesta área, em 2002, foram delimitadas quatro parcelas de 6 x 8 m e, em cada parcela, foi estabelecido um transeto perpendicular às fileiras de árvores com três posições de amostragem: (1) nas fileiras de árvores (0 m); (2) a 1 m das fileiras de árvores, e (3) a 3 m de distância das fileiras de árvores. O delineamento experimental utilizado foi em blocos casualizados com quatro repetições. A massa seca de folhedo caído embaixo da fileira de árvores foi de 1.390 kg ha-1 e diminuiu, gradativamente, para 270 kg ha-1 a 3 m de distância das árvores. As concentrações de P, K e matéria orgânica leve (MOL) embaixo das árvores foram maiores do que a 1 e 3 m de distância das fileiras. As médias mensais das temperaturas mínimas do ar e do solo embaixo e a 3 m das árvores foram similares. Entretanto, as médias mensais das temperaturas máximas do solo e do ar foram de 6 e 2 °C mais altas a 3 m das árvores, respectivamente, ao longo do período de estudo. A umidade do solo foi significativamente menor embaixo das árvores do que a 1 e 3 m de distância. O milho produziu mais grãos e palha e acumulou mais nutrientes nas posições mais próximas das fileiras de G. sepium
Evaluación del método de ELISA para detección de antígenos y complejos inmunes circulantes de Trypanosoma cruzi a través de un estudio de campo en una zona endémica de Argentina
LSST: from Science Drivers to Reference Design and Anticipated Data Products
(Abridged) We describe here the most ambitious survey currently planned in
the optical, the Large Synoptic Survey Telescope (LSST). A vast array of
science will be enabled by a single wide-deep-fast sky survey, and LSST will
have unique survey capability in the faint time domain. The LSST design is
driven by four main science themes: probing dark energy and dark matter, taking
an inventory of the Solar System, exploring the transient optical sky, and
mapping the Milky Way. LSST will be a wide-field ground-based system sited at
Cerro Pach\'{o}n in northern Chile. The telescope will have an 8.4 m (6.5 m
effective) primary mirror, a 9.6 deg field of view, and a 3.2 Gigapixel
camera. The standard observing sequence will consist of pairs of 15-second
exposures in a given field, with two such visits in each pointing in a given
night. With these repeats, the LSST system is capable of imaging about 10,000
square degrees of sky in a single filter in three nights. The typical 5
point-source depth in a single visit in will be (AB). The
project is in the construction phase and will begin regular survey operations
by 2022. The survey area will be contained within 30,000 deg with
, and will be imaged multiple times in six bands, ,
covering the wavelength range 320--1050 nm. About 90\% of the observing time
will be devoted to a deep-wide-fast survey mode which will uniformly observe a
18,000 deg region about 800 times (summed over all six bands) during the
anticipated 10 years of operations, and yield a coadded map to . The
remaining 10\% of the observing time will be allocated to projects such as a
Very Deep and Fast time domain survey. The goal is to make LSST data products,
including a relational database of about 32 trillion observations of 40 billion
objects, available to the public and scientists around the world.Comment: 57 pages, 32 color figures, version with high-resolution figures
available from https://www.lsst.org/overvie
Rationale, design and methodology of APPROACH-IS II: International study of patient-reported outcomes and frailty phenotyping in adults with congenital heart disease.
In recent years, patient-reported outcomes (PROs) have received increasing prominence in cardiovascular research and clinical care. An understanding of the variability and global experience of PROs in adults with congenital heart disease (CHD), however, is still lacking. Moreover, information on epidemiological characteristics and the frailty phenotype of older adults with CHD is minimal. The APPROACH-IS II study was established to address these knowledge gaps. This paper presents the design and methodology of APPROACH-IS II.
APPROACH-IS II is a cross-sectional global multicentric study that includes Part 1 (assessing PROs) and Part 2 (investigating the frailty phenotype of older adults). With 53 participating centers, located in 32 countries across six continents, the aim is to enroll 8000 patients with CHD. In Part 1, self-report surveys are used to collect data on PROs (e.g., quality of life, perceived health, depressive symptoms, autonomy support), and explanatory variables (e.g., social support, stigma, illness identity, empowerment). In Part 2, the cognitive functioning and frailty phenotype of older adults are measured using validated assessments.
APPROACH-IS II will generate a rich dataset representing the international experience of individuals in adult CHD care. The results of this project will provide a global view of PROs and the frailty phenotype of adults with CHD and will thereby address important knowledge gaps. Undoubtedly, the project will contribute to the overarching aim of improving optimal living and care provision for adults with CHD
- …