Nanochemistry aspects of titania in dye-sensitized solar cells

We analyze the main nanochemistry factors affecting photovoltaic performance in TiO2 employed as wide bandgap semiconductor in dye-sensitized solar cells (DSCs). What is the best morphology of the oxide? Which processes yield the required structures? Finally, putting the discussion in the context of the rapid evolution of photovoltaic technologies, we argue that new titania nanostructures will form the basic component of second-generation solar modules based on dye solar cells

Enhancing selectivity in photocatalytic formation of p-anisaldehyde in aqueous suspension under solar light irradiation via TiO2 N-doping

The photocatalytic partial oxidation of 4-methoxybenzyl alcohol to the corresponding aldehyde (p-anisaldehyde) was performed under simulated solar irradiation by using home prepared N-doped TiO2 catalysts. The photocatalysts were prepared by a sol–gel method, using TiCl4 as TiO2 precursor and NH4Cl, urea or NH4OH as N-doping sources. A commercial TiO2 (Degussa P25) was also used for comparison aims. The prepared catalysts were characterized by BET specific surface area, XRD, ESEM and UV-vis spectroscopy. The reactivity results show that (i) the doped catalysts are predominantly amorphous, and they show selectivity values far higher than those of the corresponding undoped ones and of well crystallized catalysts – even if the last ones show a higher activity – and (ii) exploitation of solar light significantly increases the reaction selectivity. In addition, different light sources were also used in order to investigate the effect of radiation wavelength ranges on the reactivity and selectivity to aldehyde

Photocatalytic selective oxidation of 5-(hydroxymethyl)-2-furaldehyde to 2,5-furandicarbaldehyde in water by using anatase, rutile and brookite TiO2 nanoparticles

5-(Hydroxymethyl)-2-furaldehyde (HMF) was selectively oxidized to 2,5-furandicarbaldehyde (FDC) in aqueous medium by using home-prepared (HP) anatase, rutile, and brookite TiO2 nanoparticles. HP samples were prepared via a sol−gel method by using TiCl4 as the TiO2 precursor. Commercial TiO2 catalysts were also used for comparison. All samples were characterized by BET specific surface area, XRD, TGA, and SEM, and the reactivity results showed that HP catalysts are predominantly amorphous and give rise to selectivities toward FDC more than twice that of commercial and well-crystallized catalysts

Extruded Expanded Polystyrene Sheets Coated by TiO2 as New Photocatalitic Materials for Foodstuffs Packaging

Nanostructured, photoactive anatase TiO2 sol prepared under very mild conditions using titanium tetraisopropoxide as the precursor is used to functionalise extruded expanded polystyrene (XPS) sheets by spray-coating resulting in stable and active materials functionalised by TiO2 nanoparticles. Photocatalytic tests of these sheets performed in a batch reactor in gas–solid system under UV irradiation show their successful activity in degrading probe molecules (2-propanol, trimethylamine and ethene). Raman spectra ensure the deposition of TiO2 as crystalline anatase phase on the polymer surface. The presence of TiO2 with respect to polymer surface can be observed in SEM images coupled to EDAX mapping allowing to monitor the surface morphology and the distribution of TiO2 particles. Finally thermoforming of these sheets in industrial standard equipment leads to useful containers for foodstuffs

Photocatalytic oxidation of aromatic alcohols to aldehydes in aqueous suspension of home-prepared titanium dioxide: 1. Selectivity enhancement by aliphatic alcohols

Oxygenated aqueous suspensions of home-prepared (HP) and commercial TiO2 catalysts were used in a batch photoreactor for carrying out the oxidation of benzyl alcohol (BA) and 4-methoxybenzyl alcohol (MBA) under different operative conditions. HP catalysts were synthesized from TiCl4 and underwent a hydrolysis treatment of different times under mild conditions. The textural characterization of catalysts was carried out with XRD, SEM observations, BET surface area and porosity measurements. For both alcohols the main oxidation products were the corresponding aromatic aldehydes and CO2. The HP catalysts exhibited selectivity values towards the aldehyde production up to 28% (BA conversion: 50%) and 41% (MBA conversion: 65%), about four times higher than those of commercial TiO2. The addition of an aliphatic alcohol (methanol, ethanol, 2-propanol or tert-butanol) in small amounts with respect to water decreased the overall oxidation rate of aromatic alcohols but enhanced the selectivity for aldehyde formation up to 1.5 times. The reactivity results suggest that: (i) the aromatic alcohol molecules interact with the TiO2 surface in different ways that eventually determine two parallel reaction pathways (partial oxidation or mineralization); (ii) the aliphatic alcohols preferentially compete with aromatic alcohols for the mineralizing pathway.Peer reviewe

Evaluation of “Caterina assay”: An Alternative Tool to the Commercialized Kits Used for Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) Identification

Abstract: Here we describe the first molecular test developed in the early stage of the pandemic to diagnose the first cases of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection in Sardinian patients in February–March 2020, when diagnostic certified methodology had not yet been adopted by clinical microbiology laboratories. The “Caterina assay” is a SYBR®Green real-time reverse-transcription polymerase chain reaction (rRT-PCR), designed to detect the nucleocapsid phosphoprotein (N) gene that exhibits high discriminative variation RNA sequence among bat and human coronaviruses. The molecular method was applied to detect SARS-CoV-2 in nasal swabs collected from 2110 suspected cases. The study article describes the first molecular test developed in the early stage of the declared pandemic to identify the coronavirus disease 2019 (COVID-19) in Sardinian patients in February–March 2020, when a diagnostic certified methodology had not yet been adopted by clinical microbiology laboratories. The assay presented high specificity and sensitivity (with a detection limit ≥50 viral genomes/µL). No false-positives were detected, as confirmed by the comparison with two certified commercial kits. Although other validated molecular methods are currently in use, the Caterina assay still represents a valid and low-cost detection procedure that could be applied in countries with limited economic resource

Ocular paracoccidioidomycosis: case report

É descrito um caso de paracoccidioidomicose com envolvimento ocular. Pela primeira vez descreve-se a presença do fungo em lesão granulomatosa de coróide. Os Autores revêm os casos de paracoccidioidomicose com acometimento do trato uveal já descritos na literatura e analisam os achados clínicos e anátomo-patológicos destes e do presente relato.A case of paracoccidioidomycosis with ocular involvement is described. For the first time the finding of the fungii in the chroidal granulomatous lesion is reported. The Authors review the cases of ocular paracoccidioidomycosis with uveal involvement already described in the available literature and analyse their clinical and pathogical characteristics, including this present one

Haplotype affinities resolve a major component of goat (<i>Capra hircus</i>) MtDNA D-loop diversity and reveal specific features of the Sardinian stock

Goat mtDNA haplogroup A is a poorly resolved lineage absorbing most of the overall diversity and is found in locations as distant as Eastern Asia and Southern Africa. Its phylogenetic dissection would cast light on an important portion of the spread of goat breeding. The aims of this work were 1) to provide an operational definition of meaningful mtDNA units within haplogroup A, 2) to investigate the mechanisms underlying the maintenance of diversity by considering the modes of selection operated by breeders and 3) to identify the peculiarities of Sardinian mtDNA types. We sequenced the mtDNA D-loop in a large sample of animals (1,591) which represents a non-trivial quota of the entire goat population of Sardinia. We found that Sardinia mirrors a large quota of mtDNA diversity of Western Eurasia in the number of variable sites, their mutational pattern and allele frequency. By using Bayesian analysis, a distance-based tree and a network analysis, we recognized demographically coherent groups of sequences identified by particular subsets of the variable positions. The results showed that this assignment system could be reproduced in other studies, capturing the greatest part of haplotype diversity. We identified haplotype groups overrepresented in Sardinian goats as a result of founder effects. We found that breeders maintain diversity of matrilines most likely through equalization of the reproductive potential. Moreover, the relevant amount of inter-farm mtDNA diversity found does not increase proportionally with distance. Our results illustrate the effects of breeding practices on the composition of maternal gene pool and identify mtDNA types that may be considered in projects aimed at retrieving the maternal component of the oldest breeds of Sardinia.</br

Identifying phenotypic expansions for congenital diaphragmatic hernia plus (CDH+) using DECIPHER data.

Congenital diaphragmatic hernia (CDH) can occur in isolation or in conjunction with other birth defects (CDH+). A molecular etiology can only be identified in a subset of CDH cases. This is due, in part, to an incomplete understanding of the genes that contribute to diaphragm development. Here, we used clinical and molecular data from 36 individuals with CDH+ who are cataloged in the DECIPHER database to identify genes that may play a role in diaphragm development and to discover new phenotypic expansions. Among this group, we identified individuals who carried putatively deleterious sequence or copy number variants affecting CREBBP, SMARCA4, UBA2, and USP9X. The role of these genes in diaphragm development was supported by their expression in the developing mouse diaphragm, their similarity to known CDH genes using data from a previously published and validated machine learning algorithm, and/or the presence of CDH in other individuals with their associated genetic disorders. Our results demonstrate how data from DECIPHER, and other public databases, can be used to identify new phenotypic expansions and suggest that CREBBP, SMARCA4, UBA2, and USP9X play a role in diaphragm development

Performance of the CMS Cathode Strip Chambers with Cosmic Rays

The Cathode Strip Chambers (CSCs) constitute the primary muon tracking device in the CMS endcaps. Their performance has been evaluated using data taken during a cosmic ray run in fall 2008. Measured noise levels are low, with the number of noisy channels well below 1%. Coordinate resolution was measured for all types of chambers, and fall in the range 47 microns to 243 microns. The efficiencies for local charged track triggers, for hit and for segments reconstruction were measured, and are above 99%. The timing resolution per layer is approximately 5 ns