Surface preparation of powder metallurgical tool steels by means of wire electrical discharge machining

The surface of two types of powder metallurgical (PM) tool steels (i.e., with and without nitrogen) was prepared using wire electrical discharge machining (WEDM). From each grade of tool steel, seven surfaces corresponding to one to seven passes of WEDM were prepared. The WEDM process was carried out using a brass wire as electrode and deionized water as dielectric. After eachWEDM pass the surface of the tool steels was thoroughly examined. Surface residual stresses were measured by the X-ray diffraction (XRD) technique. The measured stresses were found to be of tensile nature. The surface roughness of the WEDM specimens was measured using interference microscopy. The surface roughness as well as the residual stress measurements indicated an insignificant improvement of these parameters after four passes of WEDM. In addition, the formed recast layer was characterized by means of scanning electron microscopy (SEM), XRD, and X-ray photoelectron spectroscopy (XPS). The characterization investigation clearly shows diffusion of copper and zinc from the wire electrode into the work material, even after the final WEDM step. Finally, the importance of eliminating excessive WEDM steps is thoroughly discussed

Enhancement of stress resistance of the guppy <i>Poecilia reticulata</i> through feeding with vitamin C supplement

This study investigated the use of vitamin C supplement in formulated diets and live Artemia juveniles to enhance the stress resistance of the guppy Poecilia reticulata. To evaluate the stress resistance, fish were subjected to osmotic shock in pre-aerated water containing 35 ppt sodium chloride. Ascorbyl acid-poly phosphate and ascorbyl palmitate were used as vitamin C sources for formulated diets and live Artemia juveniles, respectively. Results showed that guppies fed moist formulated diets supplemented with ascorbic acid at 1,000 mg/kg or 2,000 mg/kg diet displayed significantly higher levels of stress resistance than fish fed control formulated diet for 13 d. The stress resistance of fish fed a lower dose (200 mg/kg diet), however, did not differ significantly from that of the control. On the other hand, the stress resistance of guppies fed Artemia juveniles bio-encapsulated with 10% or 20% ascorbyl palmitate did not show significant difference from that of fish fed control Artemia after 20 d. The stress resistance of these three groups of Artemia-fed fish, however, was significantly higher than that of fish fed the control formulated diet. Biochemical analyses showed that raising the ascorbic acid level in feeds resulted in a concomitant increase in the incorporated ascorbic acid level in the whole-body tissue of the guppy. The increased stress resistance of the guppy fed a vitamin C supplemented diet has also been demonstrated in four commercial farms. The potential application of the improved stress resistance in the ornamental fish industry was discussed

Automated analysis of atrial late gadolinium enhancement imaging that correlates with endocardial voltage and clinical outcomes: A 2-center study

This work was supported by the British Heart Foundation PG/10/37/28347, RG/10/11/28457, NIHR Biomedical Research Centre funding, and the ElectroCardioMaths Programme of the Imperial BHF Centre of Research Excellence

Effect of Grain Boundary Character Distribution on the Impact Toughness of 410NiMo Weld Metal

Grain boundary character distributions in 410NiMo weld metal were studied in the as-welded, first-stage, and second-stage postweld heat treatment (PWHT) conditions, and these were correlated with the Charpy-V impact toughness values of the material. The high impact toughness values in the weld metal in the as-welded and first-stage PWHT conditions compared to that in the second-stage condition are attributed to the higher fraction of low-energy I pound boundaries. A higher volume fraction of retained austenite and coarser martensite after second-stage PWHT accompanied by the formation of the ideal cube component in the 2-hour heat-treated specimen led to a reduction in the toughness value. A subsequent increase in the PWHT duration at 873 K (600 A degrees C) enhanced the formation of {111}aOE (c) 112 >, which impedes the adverse effect of the cubic component, resulting in an increase in the impact toughness. In addition to this, grain refinement during 4-hour PWHT in the second stage also increased the toughness of the weld metal

The potential for technology and knowledge transfers between foreign and local firms: a study of the construction industry in Ghana

Multinational corporations (MNCs) and other foreign firms can be conduits for technology and knowledge (T&K) transfer to host countries in the developing world. Most of the existing research focuses on T&K transfers through FDI and are drawn from Asia not Sub-Saharan Africa (SSA), although SSA is increasingly receiving foreign investment. There is a paucity of research that gives insights into project-level T&K transfer issues in SSA countries. Using the Ghanaian construction industry as an empirical focus, this article explores T&K transfer potential. The findings reveal significant weaknesses in T&K transfer across industry subsectors and between foreign and local firms. This arises from the potentially complementary but dissimilar resource and knowledge bases. The weaknesses are compounded by the absence of coherent government T&K development policie

Arteriopathy diagnosis in childhood arterial ischemic stroke: results of the vascular effects of infection in pediatric stroke study.

Background and purposeAlthough arteriopathies are the most common cause of childhood arterial ischemic stroke, and the strongest predictor of recurrent stroke, they are difficult to diagnose. We studied the role of clinical data and follow-up imaging in diagnosing cerebral and cervical arteriopathy in children with arterial ischemic stroke.MethodsVascular effects of infection in pediatric stroke, an international prospective study, enrolled 355 cases of arterial ischemic stroke (age, 29 days to 18 years) at 39 centers. A neuroradiologist and stroke neurologist independently reviewed vascular imaging of the brain (mandatory for inclusion) and neck to establish a diagnosis of arteriopathy (definite, possible, or absent) in 3 steps: (1) baseline imaging alone; (2) plus clinical data; (3) plus follow-up imaging. A 4-person committee, including a second neuroradiologist and stroke neurologist, adjudicated disagreements. Using the final diagnosis as the gold standard, we calculated the sensitivity and specificity of each step.ResultsCases were aged median 7.6 years (interquartile range, 2.8-14 years); 56% boys. The majority (52%) was previously healthy; 41% had follow-up vascular imaging. Only 56 (16%) required adjudication. The gold standard diagnosis was definite arteriopathy in 127 (36%), possible in 34 (9.6%), and absent in 194 (55%). Sensitivity was 79% at step 1, 90% at step 2, and 94% at step 3; specificity was high throughout (99%, 100%, and 100%), as was agreement between reviewers (κ=0.77, 0.81, and 0.78).ConclusionsClinical data and follow-up imaging help, yet uncertainty in the diagnosis of childhood arteriopathy remains. This presents a challenge to better understanding the mechanisms underlying these arteriopathies and designing strategies for prevention of childhood arterial ischemic stroke

Providing care for older adults in the Emergency Department: expert clinical recommendations from the European Task Force on Geriatric Emergency Medicine

Purpose Despite the rapidly expanding knowledge in the field of Geriatric Emergency Medicine in Europe, widespread implementation of change is still lacking. Many opportunities in everyday clinical care are missed to improve care for this susceptible and growing patient group. The aim was to develop expert clinical recommendations on Geriatric Emergency Medicine to be disseminated across Europe.Methods A group of multi-disciplinary experts in the field of Geriatric Emergency Medicine in Europe was assembled. Using a modified Delphi procedure, a prioritized list of topics related to Geriatric Emergency Medicine was created. Next, a multi-disciplinary group of nurses, geriatricians and emergency physicians performed a review of recent guidelines and literature to create recommendations. These recommendations were voted upon by a group of experts and placed on visually attractive posters. The expert group identified the following eight subject areas to develop expert recommendations on: Comprehensive Geriatric Assessment in the Emergency Department (ED), age/frailty adjusted risk stratification, delirium and cognitive impairment, medication reviews in the ED for older adults, family involvement, ED environment, silver trauma, end of life care in the acute setting.Results Eight posters with expert clinical recommendations on the most important topics in Geriatric Emergency Medicine are now available through https://posters.geriemeurope.eu/.Conclusion Expert clinical recommendations for Geriatric Emergency Medicine may help to improve care for older patients in the Emergency Department and are ready for dissemination across Europe.Geriatrics in primary carePublic Health and primary car