Modeling post-fire water erosion mitigation strategies

Abstract. Severe wildfires are often followed by significant increase in runoff and erosion, due to vegetation damage and changes in physical and chemical soil properties. Peak flows and sediment yields can increase up to two orders of magnitude, becoming dangerous for human lives and the ecosystem, especially in the wildland–urban interface. Watershed post-fire rehabilitation measures are usually used to mitigate the effects of fire on runoff and erosion, by protecting soil from splash and shear stress detachment and enhancing its infiltration capacity. Modeling post-fire erosion and erosion mitigation strategies can be useful in selecting the effectiveness of a rehabilitation method. In this paper a distributed model based on the Revised Universal Soil Loss Equation (RUSLE), properly parameterized for a Mediterranean basin located in Sardinia, is used to determine soil losses for six different scenarios describing both natural and post-fire basin condition, the last also accounting for the single and combined effect of different erosion mitigation measures. Fire effect on vegetation and soil properties have been mimed by changing soil drainage capacity and organic matter content, and RUSLE factors related to soil cover and protection measures. Model results, validated using measured data on erosion rates from the literature and in situ field campaigns, show the effect of the analyzed rehabilitation treatments in reducing the amount of soil losses with the peculiar characteristics of the spatial distribution of such changes. In particular, the mulching treatment substantially decreases erosion both in its mean value (−75%) and in the spatially distribution of the erosion levels over the burned area . On the contrary, the breaking up of the hydrophobic layer decreases post-fire mean soil losses of about the 14%, although it strongly influences the spatial distribution of the erosion levels

Nanofibrous hydrogel composites as mechanically robust tissue engineering scaffolds.

Hydrogels closely resemble the extracellular matrix (ECM) and can support cell proliferation while new tissue is formed, making them materials of choice as tissue engineering scaffolds. However, their sometimes-poor mechanical properties can hinder their application. The addition of meshes of nanofibers embedded in their matrix forms a composite that draws from the advantages of both components. Given that these materials are still in the early stages of development, there is a lack of uniformity across methods for characterizing their mechanical properties. Here, we propose a simple metric to enable comparisons between materials. The fibrous constituent improves the mechanical properties of the hydrogel, while the biocompatibility and functionality of the gels are maintained or even improved.The authors acknowledge the support of the EPSRC through a doctoral training award (ALB) and via the Nano Science and Technology Doctoral Training Centre (NanoDTC), EP/G037221/1 (GSO).This is the accepted manuscript. The final version is available from http://www.cell.com/trends/biotechnology/references/S0167-7799%2814%2900181-4

Multi-scale mechanical response of freeze-dried collagen scaffolds for tissue engineering applications.

Tissue engineering has grown in the past two decades as a promising solution to unresolved clinical problems such as osteoarthritis. The mechanical response of tissue engineering scaffolds is one of the factors determining their use in applications such as cartilage and bone repair. The relationship between the structural and intrinsic mechanical properties of the scaffolds was the object of this study, with the ultimate aim of understanding the stiffness of the substrate that adhered cells experience, and its link to the bulk mechanical properties. Freeze-dried type I collagen porous scaffolds made with varying slurry concentrations and pore sizes were tested in a viscoelastic framework by macroindentation. Membranes made up of stacks of pore walls were indented using colloidal probe atomic force microscopy. It was found that the bulk scaffold mechanical response varied with collagen concentration in the slurry consistent with previous studies on these materials. Hydration of the scaffolds resulted in a more compliant response, yet lesser viscoelastic relaxation. Indentation of the membranes suggested that the material making up the pore walls remains unchanged between conditions, so that the stiffness of the scaffolds at the scale of seeded cells is unchanged; rather, it is suggested that thicker pore walls or more of these result in the increased moduli for the greater slurry concentration conditions.The authors are grateful to the Nano Doctoral Training Centre (NanoDTC), University of Cambridge, and the EPSRC who supported this work through the EP/G037221/1 grant.This is the final published version. It originally appeared at http://www.sciencedirect.com/science/article/pii/S1751616114003397#

V-band Doppler backscattering diagnostic in the TCV tokamak

A variable configuration V-band heterodyne Doppler back-scattering diagnostic has been recently made operational in the tokamak a configuration variable. This article describes the hardware setup options, flexible quasi-optical launcher antenna, data-analysis techniques, and first data. The diagnostic uses a fast arbitrary waveform generator as the main oscillator and commercial vector network analyzer extension modules as the main mm-wave hardware. It allows sweepable single or multi-frequency operation. A flexible quasi-optical launcher antenna allows 3D poloidal (10 degrees - 58 degrees) and toroidal (-180 degrees to 180 degrees) steering of the beam with 0.2 degrees accuracy. A pair of fast HE11 miter-bend polarizers allow flexible coupling to either O or X mode and programmable polarization changes during the shot. These have been used to measure the magnetic-field pitch angle in the edge of the plasma by monitoring the backscattered signal power. Ray-tracing simulations reveal an available k(perpendicular to) range between 3 and 16 cm(-1) with a resolution of 2-4 cm(-1). Perpendicular rotation velocity estimates compare well against ExB plasma poloidal rotation estimates from charge exchange recombination spectroscopy

Osteogenesis evaluation of duck’s feet derived collagen/hydroxyapatite sponges immersed in dexamethasone

Background: The aim of this study was to investigate the osteogenesis effects of DC and DC/HAp sponge immersed in without and with dexamethasone. Methods: The experimental groups in this study were DC and DC/HAp sponge immersed in without dexamethasone (Dex(â )DC and Dex(â )-DC/HAp group) and with dexamethasone (Dex(+)-DC and Dex(+)-DC/HAp group). We characterized DC and DC/HAp sponge using compressive strength, scanning electron microscopy (SEM). Also, osteogenic differentiation of BMSCs on sponge (Dex(â )DC, Dex(â )-DC/HAp, Dex(+)-DC and Dex(+)-DC/HAp group) was assessed by SEM, 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazoliumbromide (MTT) assay, alkaline phosphatase (ALP) activity assay and reverse transcription-PCR (RT-PCR). Results: In this study, we assessed osteogenic differentiation of BMSCs on Duckâ s feet-derived collagen (DC)/ HAp sponge immersed with dexamethasone Dex(+)-DC/HAp. These results showed that Dex(+)-DC/HAp group increased cell proliferation and osteogenic differentiation of BMSCs during 28 days. Conclusion: From these results, Dex(+)-DC/HAp can be envisioned as a potential biomaterial for bone regeneration applications.This work was supported by Technology Commercialization Support Program [grant number 814005-03-3-HD020], Ministry for Food, Agriculture, Forestry and Fisheries (MIFAFF).info:eu-repo/semantics/publishedVersio

P113 is a merozoite surface protein that binds the N terminus of Plasmodium falciparum RH5.

Invasion of erythrocytes by Plasmodium falciparum merozoites is necessary for malaria pathogenesis and is therefore a primary target for vaccine development. RH5 is a leading subunit vaccine candidate because anti-RH5 antibodies inhibit parasite growth and the interaction with its erythrocyte receptor basigin is essential for invasion. RH5 is secreted, complexes with other parasite proteins including CyRPA and RIPR, and contains a conserved N-terminal region (RH5Nt) of unknown function that is cleaved from the native protein. Here, we identify P113 as a merozoite surface protein that directly interacts with RH5Nt. Using recombinant proteins and a sensitive protein interaction assay, we establish the binding interdependencies of all the other known RH5 complex components and conclude that the RH5Nt-P113 interaction provides a releasable mechanism for anchoring RH5 to the merozoite surface. We exploit these findings to design a chemically synthesized peptide corresponding to RH5Nt, which could contribute to a cost-effective malaria vaccine

Immunization with apical membrane antigen 1 confers sterile infection-blocking immunity against Plasmodium sporozoite challenge in a rodent model

Apical membrane antigen 1 (AMA-1) is a leading blood-stage malaria vaccine candidate. Consistent with a key role in erythrocytic invasion, AMA-1-specific antibodies have been implicated in AMA-1-induced protective immunity. AMA-1 is also expressed in sporozoites and in mature liver schizonts where it may be a target of protective cell-mediated immunity. Here, we demonstrate for the first time that immunization with AMA-1 can induce sterile infection-blocking immunity against Plasmodium sporozoite challenge in 80% of immunized mice. Significantly higher levels of gamma interferon (IFN-γ)/interleukin-2 (IL-2)/tumor necrosis factor (TNF) multifunctional T cells were noted in immunized mice than in control mice. We also report the first identification of minimal CD8 and CD4 T cell epitopes on Plasmodium yoelii AMA-1. These data establish AMA-1 as a target of both preerythrocytic- and erythrocytic-stage protective immune responses and validate vaccine approaches designed to induce both cellular and humoral immunity

Overview of the TCV tokamak experimental programme

The tokamak a configuration variable (TCV) continues to leverage its unique shaping capabilities, flexible heating systems and modern control system to address critical issues in preparation for ITER and a fusion power plant. For the 2019-20 campaign its configurational flexibility has been enhanced with the installation of removable divertor gas baffles, its diagnostic capabilities with an extensive set of upgrades and its heating systems with new dual frequency gyrotrons. The gas baffles reduce coupling between the divertor and the main chamber and allow for detailed investigations on the role of fuelling in general and, together with upgraded boundary diagnostics, test divertor and edge models in particular. The increased heating capabilities broaden the operational regime to include T (e)/T (i) similar to 1 and have stimulated refocussing studies from L-mode to H-mode across a range of research topics. ITER baseline parameters were reached in type-I ELMy H-modes and alternative regimes with \u27small\u27 (or no) ELMs explored. Most prominently, negative triangularity was investigated in detail and confirmed as an attractive scenario with H-mode level core confinement but an L-mode edge. Emphasis was also placed on control, where an increased number of observers, actuators and control solutions became available and are now integrated into a generic control framework as will be needed in future devices. The quantity and quality of results of the 2019-20 TCV campaign are a testament to its successful integration within the European research effort alongside a vibrant domestic programme and international collaborations

Physics research on the TCV tokamak facility: from conventional to alternative scenarios and beyond

The research program of the TCV tokamak ranges from conventional to advanced-tokamak scenarios and alternative divertor configurations, to exploratory plasmas driven by theoretical insight, exploiting the device’s unique shaping capabilities. Disruption avoidance by real-time locked mode prevention or unlocking with electron-cyclotron resonance heating (ECRH) was thoroughly documented, using magnetic and radiation triggers. Runaway generation with high-Z noble-gas injection and runaway dissipation by subsequent Ne or Ar injection were studied for model validation. The new 1 MW neutral beam injector has expanded the parameter range, now encompassing ELMy H-modes in an ITER-like shape and nearly non-inductive H-mode discharges sustained by electron cyclotron and neutral beam current drive. In the H-mode, the pedestal pressure increases modestly with nitrogen seeding while fueling moves the density pedestal outwards, but the plasma stored energy is largely uncorrelated to either seeding or fueling. High fueling at high triangularity is key to accessing the attractive small edge-localized mode (type-II) regime. Turbulence is reduced in the core at negative triangularity, consistent with increased confinement and in accord with global gyrokinetic simulations. The geodesic acoustic mode, possibly coupled with avalanche events, has been linked with particle flow to the wall in diverted plasmas. Detachment, scrape-off layer transport, and turbulence were studied in L- and H-modes in both standard and alternative configurations (snowflake, super-X, and beyond). The detachment process is caused by power ‘starvation’ reducing the ionization source, with volume recombination playing only a minor role. Partial detachment in the H-mode is obtained with impurity seeding and has shown little dependence on flux expansion in standard single-null geometry. In the attached L-mode phase, increasing the outer connection length reduces the in–out heat-flow asymmetry. A doublet plasma, featuring an internal X-point, was achieved successfully, and a transport barrier was observed in the mantle just outside the internal separatrix. In the near future variable-configuration baffles and possibly divertor pumping will be introduced to investigate the effect of divertor closure on exhaust and performance, and 3.5 MW ECRH and 1 MW neutral beam injection heating will be added

Investigation of the intrinsic permeability of ice-templated collagen scaffolds as a function of their structural and mechanical properties

Collagen scaffolds are widely used in a range of tissue engineering applications, both in vitro and in vivo, where their permeability to fluid flow greatly affects their mechanical and biological functionality. This paper reports new insights into the interrelationships between permeability, scaffold structure, fluid pressure and deformation in collagen scaffolds, focussing in particular on the degree of closure and the alignment of the pores. Isotropic and aligned scaffolds of different occlusivity were produced by ice templating, and were characterised in terms of their structure and mechanical properties. Permeability studies were conducted using two experimental set-ups to cover a wide range of applied fluid pressures. The permeability was found to be constant at low pressures for a given scaffold with more open structures and aligned structures being more permeable. The deformation of scaffolds under high pressure led to a decrease in permeability. The aligned structures were more responsive to deformation than their isotropic equivalents with their permeability falling more quickly at low strain. For isotropic samples, a broad (1 − ɛ)2 dependence for permeability was observed with the constant of proportionality varying with collagen fraction as the starting structures became more occluded. Aligned scaffolds did not follow the same behaviour, with the pores apparently closing more quickly in response to early deformation. These results highlight the importance of scaffold structure in determining permeability to interstitial fluid, and provide an understanding of scaffold behaviour within the complex mechanical environment of the body. Statement of significance: Collagen scaffolds are widely used in tissue engineering applications, for instance to contribute with wound healing. Their permeability to fluid flow, such as water and blood, is important to ensure they perform efficiently when inside the body. The present study reports new insights into the relationships between permeability, scaffold structure, fluid pressure and deformation in collagen scaffolds. It presents in particular the experimental setups used to measure these properties and the result of comparisons between collagen scaffolds with different structures: aligned and isotropic (non-aligned). It indicates quantitative differences in terms of permeability, and the effects of compression on such permeability. The results contribute to the development and understanding of collagen scaffolds and their applications