Confident methods for the evaluation of the hydrogen content in nanoporous carbon microfibers

Abstract Nanoporous carbon microfibers were grown by chemical vapor deposition in the vapor-liquid solid mode using different fluid hydrocarbons as precursors in different proportions. The as-grown samples were further treated in argon and hydrogen atmospheres at different pressure conditions and annealed at several temperatures in order to deduce the best conditions for the incorporation and re-incorporation of hydrogen into the microfibers through the nanopores. Since there are some discrepancies in the results on the hydrogen content obtained under vacuum conditions, in this work, we have measured the hydrogen content in the microfibers using several analytical methods in ambient conditions: surface tension, mass density, and Raman measurements. A discussion on the validity of the results obtained through the correlation between them is the purpose of the present work.Peer Reviewe

Gender differences in the plasma concentration of the GAS6-TAM system in COVID-19 patients

Resumen del trabajo presentado en el 4th European Congress on Thrombosis and Haemostasis, celebrado en Gante (Bélgica), los días 14 y 15 de octubre de 2021Background: SARS-CoV-2 induces an immune response with potentially harmful effects for the patient due to an uncontrolled release of inflammatory factors, specially at the capillary wall. The vitamin K-dependent plasma protein GAS6 and the TAM (TYRO3, AXL, and MERTK) receptors play a relevant role among restorative mechanisms that counterbalance pro-inflammatory responses at the endothelial interface. Aims: To study the influence of gender on the effects of SARS-CoV-2 infection in the GAS6/TAM system, as reflected by plasma concentration at patient admittance at the emergency ward. Methods: The plasma content of GAS6, AXL, and MERTK was analyzed in a first group of 132 patients, 68 females and 64 males consecutively admitted to the emergency ward during the first peak of COVID-19. A confirmatory group was studied from the second wave of contagions. An analysis of gender differences in relation to the GAS6/TAM concentrations in plasma was performed on this population. Results: In accordance with recently published GAS6 levels, significantly higher in the SARS-CoV-2 positive than in negative patients, increased progressively with the severity of the disease in SARS-CoV-2 positive individual irrespective of the gender of the patient. In contrast, while soluble AXL exhibited higher plasma concentration in deceased patients and no significant differences were observed in MERTK concentration, differential gender analysis suggest differences in soluble TAM receptors. While a COVID-19 related increase in sAXL was observed in men, this was not the case in women. Oppositely, MERTK differences due to COVID-19 infection were only significant in women. Summary/Conclusion: GAS6-TAM system of ligands and receptors is implicated in the immune response to SARS-CoV-2 in patients from both genders. Plasma GAS6 levels paralleled COVID-19 severity being an early marker of disease prognosis in both sexes. In contrast, soluble TAM receptors presented a gender-specific behavior. Sex-related differences in sAXL and sMERTK expression in COVID-19 patients could affect therapy efficacy deserving further investigation

Overview of recent TJ-II stellarator results

The main results obtained in the TJ-II stellarator in the last two years are reported. The most important topics investigated have been modelling and validation of impurity transport, validation of gyrokinetic simulations, turbulence characterisation, effect of magnetic configuration on transport, fuelling with pellet injection, fast particles and liquid metal plasma facing components. As regards impurity transport research, a number of working lines exploring several recently discovered effects have been developed: the effect of tangential drifts on stellarator neoclassical transport, the impurity flux driven by electric fields tangent to magnetic surfaces and attempts of experimental validation with Doppler reflectometry of the variation of the radial electric field on the flux surface. Concerning gyrokinetic simulations, two validation activities have been performed, the comparison with measurements of zonal flow relaxation in pellet-induced fast transients and the comparison with experimental poloidal variation of fluctuations amplitude. The impact of radial electric fields on turbulence spreading in the edge and scrape-off layer has been also experimentally characterized using a 2D Langmuir probe array. Another remarkable piece of work has been the investigation of the radial propagation of small temperature perturbations using transfer entropy. Research on the physics and modelling of plasma core fuelling with pellet and tracer-encapsulated solid-pellet injection has produced also relevant results. Neutral beam injection driven Alfvénic activity and its possible control by electron cyclotron current drive has been examined as well in TJ-II. Finally, recent results on alternative plasma facing components based on liquid metals are also presented. ISSN:0029-5515 ISSN:1741-432

Latest physics results of TJ-II flexible heliac

This paper is devoted to the presentation of the most relevant recent Physics results obtained in the TJ-II flexible heliac. Firstly ECRH modulation and plasma breakdown studies are summarised; then the particle control techniques used to obtain reproducible discharges with density under control are presented. Transport studies show internal heat transport barriers that reduce heat conductivity to neoclassical values, and ELM-like transport events, similar to those observed in tokamaks and in other stellarators before and during H mode transition. Evidence of ExB sheared has been observed both in the proximity of rational surfaces. Finally, a high resolution Thomsom Scattering system has shown Te and ne profile structures

Overview of JET results for optimising ITER operation

The JET 2019–2020 scientific and technological programme exploited the results of years of concerted scientific and engineering work, including the ITER-like wall (ILW: Be wall and W divertor) installed in 2010, improved diagnostic capabilities now fully available, a major neutral beam injection upgrade providing record power in 2019–2020, and tested the technical and procedural preparation for safe operation with tritium. Research along three complementary axes yielded a wealth of new results. Firstly, the JET plasma programme delivered scenarios suitable for high fusion power and alpha particle (α) physics in the coming D–T campaign (DTE2), with record sustained neutron rates, as well as plasmas for clarifying the impact of isotope mass on plasma core, edge and plasma-wall interactions, and for ITER pre-fusion power operation. The efficacy of the newly installed shattered pellet injector for mitigating disruption forces and runaway electrons was demonstrated. Secondly, research on the consequences of long-term exposure to JET-ILW plasma was completed, with emphasis on wall damage and fuel retention, and with analyses of wall materials and dust particles that will help validate assumptions and codes for design and operation of ITER and DEMO. Thirdly, the nuclear technology programme aiming to deliver maximum technological return from operations in D, T and D–T benefited from the highest D–D neutron yield in years, securing results for validating radiation transport and activation codes, and nuclear data for ITER

Neutral pathways and heat flux widths in vertical- and horizontal-target EDGE2D-EIRENE simulations of JET

This paper further analyses the EDGE2D-EIRENE simulations presented by Chankin et al (2017 Nucl. Mater. Energy 12 273), of L-mode JET plasmas in vertical-vertical (VV) and Vertical-horizontal (VH) divertor configurations. As expected, the simulated outer divertor ionisation source peaks near the separatrix in VV and radially further out in VH. We identify the reflections of recycled neutrals from lower divertor tiles as the primary mechanism by which ionisation is concentrated on the outer divertor separatrix in the VV configuration. These lower tile reflection pathways (of neutrals from the outer divertor, and to an even greater extent from the inner divertor) dominate the outer divertor separatrix ionisation. In contrast, the lower-tile-reflection pathways are much weaker in the VH simulation and its outer divertor ionisation is dominated by neutrals which do not reflect from any surfaces. Interestingly, these differences in neutral pathways give rise to strong differences in the heat flux density width λq at the outer divertor entrance: λq = 3.2 mm in VH compared to λq = 11.8 mm in VV. In VH, a narrow channel exists in the near scrape-off-layer (SOL) where the convected heat flux, driven by strong Er × B flow and thermoelectric current, dominates over the conducted heat flux. The width of this channel sets λq and is determined by the radial distance between the separatrix and the ionisation peak in the outer divertor

Investigation into the formation of the scrape-off layer density shoulder in JET ITER-like wall L-mode and H-mode plasmas

The low temperature boundary layer plasma (Scrape-Off-Layer or SOL) between the hot core and the surrounding vessel determines the level of power-loading, erosion and implantation of material surfaces, and thus the viability of tokamak-based fusion as an energy source. This study explores mechanisms affecting the formation of flattened density profiles, so-called ‘density shoulders’, in the low-field side (LFS) SOL, which modify ion and neutral fluxes to surfaces – and subsequent erosion. There is evidence against local enhancement of ionization inducing shoulder formation. We find that increases in SOL parallel resistivity, Λdiv (=[L||νei Ωi ]/cs Ωe), postulated to lead to shoulder growth through changes in SOL turbulence characteristics, correlates with increases in upstream SOL shoulder amplitude, As only under a subset of conditions (D2-fuelled L-mode density scans with outer strike point on the horizontal target). Λdiv fails to correlate with As for cases of N2 seeding or during sweeping of the strike point across the horizontal target. The limited correlation of Λdiv with As was also found for H-mode discharges. Thus, while Λdiv above a threshold of ~1 may be necessary for shoulder formation and/or growth, another shoulder mechanism is required. More significantly we find that in contrast to parallel resistivity, outer divertor recycling as quantified by the total outer divertor Balmer Dα emission, I-Dα, does scale with shoulder amplitude where Λdiv does and even where Λdiv fails. Divertor recycling could lead to SOL density shoulder formation through: a) reducing the parallel to the field flow (loss) of ions out of the SOL to the divertor; and b) changes in radial electric fields which lead to ExB poloidal flows as well as potentially affecting the SOL turbulence birth characteristics. Thus changes in divertor recycling may be the sole process in bringing about SOL density shoulders or in tandem with parallel resistivity

Observations and modelling of ion cyclotron emission observed in JET plasmas using a sub-harmonic arc detection system during ion cyclotron resonance heating

Peer reviewe