628 research outputs found
Recommended from our members
Calibration Procedures for a Computational Model of Ductile Fracture
A recent extension of the Gurson constitutive model of damage and failure of ductile structural alloys accounts for localization and crack formation under shearing as well as tension. When properly calibrated against a basic set of experiments, this model has the potential to predict the emergence and propagation of cracks over a wide range of stress states. This paper addresses procedures for calibrating the damage parameters of the extended constitutive model. The procedures are demonstrated for DH36 steel using data from three tests: (i) tension of a round bar, (ii) mode I cracking in a compact tension specimen, and (iii) shear localization and mode II cracking in a shear-off specimen. The computational model is then used to study the emergence of the cup-cone fracture mode in the neck of a round tensile bar. Ductility of a notched round bar provides additional validation.Engineering and Applied Science
A Numerical Investigation of Hurricane Florence-Induced Compound Flooding in the Cape Fear Estuary Using a Dynamically Coupled Hydrological-Ocean Model
Hurricane-induced compound flooding is a combined result of multiple processes, including overland runoff, precipitation, and storm surge. This study presents a dynamical coupling method applied at the boundary of a processes-based hydrological model (the hydrological modeling extension package of the Weather Research and Forecasting model) and the two-dimensional Regional Ocean Modeling System on the platform of the Coupled-Ocean-Atmosphere-Wave-Sediment Transport Modeling System. The coupled model was adapted to the Cape Fear River Basin and adjacent coastal ocean in North Carolina, United States, which suffered severe losses due to the compound flood induced by Hurricane Florence in 2018. The model\u27s robustness was evaluated via comparison against observed water levels in the watershed, estuary, and along the coast. With a series of sensitivity experiments, the contributions from different processes to the water level variations in the estuary were untangled and quantified. Based on the temporal evolution of wind, water flux, water level, and water-level gradient, compound flooding in the estuary was categorized into four stages: (I) swelling, (II) local-wind-dominated, (III) transition, and (IV) overland-runoff-dominated. A nonlinear effect was identified between overland runoff and water level in the estuary, which indicated the estuary could serve as a buffer for surges from the ocean side by reducing the maximum surge height. Water budget analysis indicated that water in the estuary was flushed 10 times by overland runoff within 23 days after Florence\u27s landfall
Fully gapped topological surface states in BiSe films induced by a d-wave high-temperature superconductor
Topological insulators are a new class of materials, that exhibit robust
gapless surface states protected by time-reversal symmetry. The interplay
between such symmetry-protected topological surface states and symmetry-broken
states (e.g. superconductivity) provides a platform for exploring novel quantum
phenomena and new functionalities, such as 1D chiral or helical gapless
Majorana fermions, and Majorana zero modes which may find application in
fault-tolerant quantum computation. Inducing superconductivity on topological
surface states is a prerequisite for their experimental realization. Here by
growing high quality topological insulator BiSe films on a d-wave
superconductor BiSrCaCuO using molecular beam epitaxy,
we are able to induce high temperature superconductivity on the surface states
of BiSe films with a large pairing gap up to 15 meV. Interestingly,
distinct from the d-wave pairing of BiSrCaCuO, the
proximity-induced gap on the surface states is nearly isotropic and consistent
with predominant s-wave pairing as revealed by angle-resolved photoemission
spectroscopy. Our work could provide a critical step toward the realization of
the long sought-after Majorana zero modes.Comment: Nature Physics, DOI:10.1038/nphys274
Two-photon Lithography for 3D Magnetic Nanostructure Fabrication
Ferromagnetic materials have been utilised as recording media within data
storage devices for many decades. Confinement of the material to a two
dimensional plane is a significant bottleneck in achieving ultra-high recording
densities and this has led to the proposition of three dimensional (3D)
racetrack memories that utilise domain wall propagation along nanowires.
However, the fabrication of 3D magnetic nanostructures of complex geometry is
highly challenging and not easily achievable with standard lithography
techniques. Here, by using a combination of two-photon lithography and
electrochemical deposition, we show a new approach to construct 3D magnetic
nanostructures of complex geometry. The magnetic properties are found to be
intimately related to the 3D geometry of the structure and magnetic imaging
experiments provide evidence of domain wall pinning at a 3D nanostructured
junction
Study of and
The decays and have been
investigated with a sample of 225.2 million events collected with the
BESIII detector at the BEPCII collider. The branching fractions are
determined to be and . Distributions of the angle
between the proton or anti-neutron and the beam direction are well
described by the form , and we find
for and
for . Our branching-fraction
results suggest a large phase angle between the strong and electromagnetic
amplitudes describing the decay.Comment: 16 pages, 13 figures, the 2nd version, submitted to PR
GEOTRACES IC1 (BATS) contamination-prone trace element isotopes Cd, Fe, Pb, Zn, Cu, and Mo intercalibration
International audienceWe report data on the isotopic composition of cadmium, copper, iron, lead, zinc, and molybdenum at the GEOTRACES IC1 BATS Atlantic intercalibration station. In general, the between lab and within-lab precisions are adequate to resolve global gradients and vertical gradients at this station for Cd, Fe, Pb, and Zn. Cd and Zn isotopes show clear variations in the upper water column and more subtle variations in the deep water; these variations are attributable, in part, to progressive mass fractionation of isotopes by Rayleigh distillation from biogenic uptake and/or adsorption. Fe isotope variability is attributed to heavier crustal dust and hydrothermal sources and light Fe from reducing sediments. Pb isotope variability results from temporal changes in anthropogenic source isotopic compositions and the relative contributions of U.S. and European Pb sources. Cu and Mo isotope variability is more subtle and close to analytical precision. Although the present situation is adequate for proceeding with GEOTRACES, it should be possible to improve the within-lab and between-lab precisions for some of these properties
The state of the Martian climate
60°N was +2.0°C, relative to the 1981–2010 average value (Fig. 5.1). This marks a new high for the record. The average annual surface air temperature (SAT) anomaly for 2016 for land stations north of starting in 1900, and is a significant increase over the previous highest value of +1.2°C, which was observed in 2007, 2011, and 2015. Average global annual temperatures also showed record values in 2015 and 2016. Currently, the Arctic is warming at more than twice the rate of lower latitudes
Measurements of elliptic and triangular flow in high-multiplicity HeAu collisions at GeV
We present the first measurement of elliptic () and triangular ()
flow in high-multiplicity HeAu collisions at
GeV. Two-particle correlations, where the particles have a large separation in
pseudorapidity, are compared in HeAu and in collisions and
indicate that collective effects dominate the second and third Fourier
components for the correlations observed in the HeAu system. The
collective behavior is quantified in terms of elliptic and triangular
anisotropy coefficients measured with respect to their corresponding
event planes. The values are comparable to those previously measured in
Au collisions at the same nucleon-nucleon center-of-mass energy.
Comparison with various theoretical predictions are made, including to models
where the hot spots created by the impact of the three He nucleons on the
Au nucleus expand hydrodynamically to generate the triangular flow. The
agreement of these models with data may indicate the formation of low-viscosity
quark-gluon plasma even in these small collision systems.Comment: 630 authors, 9 pages, 4 figures, 2 tables. v2 is the version accepted
for publication by Physical Review Letters. Plain text data tables for the
points plotted in figures for this and previous PHENIX publications are (or
will be) publicly available at http://www.phenix.bnl.gov/papers.htm
- …