Customisable 3D printed microfluidics for integrated analysis and optimisation

The formation of smart Lab-on-a-Chip (LOC) devices featuring integrated sensing optics is currently hindered by convoluted and expensive manufacturing procedures. In this work, a series of 3D-printed LOC devices were designed and manufactured via stereolithography (SL) in a matter of hours. The spectroscopic performance of a variety of optical fibre combinations were tested, and the optimum path length for performing Ultraviolet-visible (UV-vis) spectroscopy determined. The information gained in these trials was then used in a reaction optimisation for the formation of carvone semicarbazone. The production of high resolution surface channels (100–500 μm) means that these devices were capable of handling a wide range of concentrations (9 μM–38 mM), and are ideally suited to both analyte detection and process optimisation. This ability to tailor the chip design and its integrated features as a direct result of the reaction being assessed, at such a low time and cost penalty greatly increases the user's ability to optimise both their device and reaction. As a result of the information gained in this investigation, we are able to report the first instance of a 3D-printed LOC device with fully integrated, in-line monitoring capabilities via the use of embedded optical fibres capable of performing UV-vis spectroscopy directly inside micro channels

An Empirical Analysis of Dynamic Multiscale Hedging using Wavelet Decomposition

This paper investigates the hedging effectiveness of a dynamic moving window OLS hedging model, formed using wavelet decomposed time-series. The wavelet transform is applied to calculate the appropriate dynamic minimum-variance hedge ratio for various hedging horizons for a number of assets. The effectiveness of the dynamic multiscale hedging strategy is then tested, both in- and out-of-sample, using standard variance reduction and expanded to include a downside risk metric, the time horizon dependent Value-at-Risk. Measured using variance reduction, the effectiveness converges to one at longer scales, while a measure of VaR reduction indicates a portion of residual risk remains at all scales. Analysis of the hedge portfolio distributions indicate that this unhedged tail risk is related to excess portfolio kurtosis found at all scales.Comment: To Appear: Journal of Futures Market

How the gene ontology evolves.

BACKGROUND: Maintaining a bio-ontology in the long term requires improving and updating its contents so that it adequately captures what is known about biological phenomena. This paper illustrates how these processes are carried out, by studying the ways in which curators at the Gene Ontology have hitherto incorporated new knowledge into their resource. RESULTS: Five types of circumstances are singled out as warranting changes in the ontology: (1) the emergence of anomalies within GO; (2) the extension of the scope of GO; (3) divergence in how terminology is used across user communities; (4) new discoveries that change the meaning of the terms used and their relations to each other; and (5) the extension of the range of relations used to link entities or processes described by GO terms. CONCLUSION: This study illustrates the difficulties involved in applying general standards to the development of a specific ontology. Ontology curation aims to produce a faithful representation of knowledge domains as they keep developing, which requires the translation of general guidelines into specific representations of reality and an understanding of how scientific knowledge is produced and constantly updated. In this context, it is important that trained curators with technical expertise in the scientific field(s) in question are involved in supervising ontology shifts and identifying inaccuracies

Solid-state additive manufacturing for metallized optical fiber integration

The formation of smart, Metal Matrix Composite (MMC) structures through the use of solid-state Ultrasonic Additive Manufacturing (UAM) is currently hindered by the fragility of uncoated optical fibers under the required processing conditions. In this work, optical fibers equipped with metallic coatings were fully integrated into solid Aluminum matrices using processing parameter levels not previously possible. The mechanical performance of the resulting manufactured composite structure, as well as the functionality of the integrated fibers, was tested. Optical microscopy, Scanning Electron Microscopy (SEM) and Focused Ion Beam (FIB) analysis were used to characterize the interlaminar and fiber/matrix interfaces whilst mechanical peel testing was used to quantify bond strength. Via the integration of metallized optical fibers it was possible to increase the bond density by 20–22%, increase the composite mechanical strength by 12–29% and create a solid state bond between the metal matrix and fiber coating; whilst maintaining full fiber functionality

Additively manufactured lab-on-chip devices

3D printing of microfluidics is in its infancy but it is already demonstrating game-changing potential. The technology offers new capabilities in highly complex geometries that can be designed and printed to high resolutions in many iterations. At Loughborough University our goal is to create smart complex 3D printed bespoke reactors that can adhere to a variety of industrial applications. This work is highly interdisciplinary and is spearheaded by a cross-campus collaborative expert group from Manufacturing and Chemical Engineering, Biology and Chemistry. The presented work was based on the production of a variety of flow reactor Lab-on-Chip (LOC) devices, each possessing unique capabilities in regards to both sensing and particle manipulation techniques. Multiple applications are covered such as the embedding of metal coated optical fibres and electronics within a metal matrix for inline sensing capabilities; the manufacture of high pressure and high temperature metal matrix LOC devices for application in supercritical fluid chemistry and hostile sampling; and the design and optimisation of magnetic particle continuous flow separators. The results are demonstrated for all three of the above mentioned applications and the outcomes, to date, of the individual projects will be concluded with the expected further work

Self-injurious behaviour in young children with Lesch-Nyhan syndrome

The early development of self-injurious behaviour in three young boys (aged 17,25, and 30 months at start of study) with Lesch-Nyhan syndrome was examined by means of parental interviews and by direct observations completed at 3 to 4 monthly intervals over an 18-month period. Results suggest that the self-injury began in a different way from that of other young children with autism and/or developmental disabilities in that, from the start, self-injurious responses were sudden and violent, rather than emerging gradually over time. Drastic measures, such as removal of the teeth or provision of tooth guards, were often taken to prevent further tissue damage. Direct observations showed that the boys’self-injury occurred at lower rates, but their carers were highly concerned about the behaviour. Sequential analysis of the observational data indicated that on some occasions the children were more likely to self-injure during periods of low social interaction, suggesting that their self-injury may have been influenced by environmental factors. The theoretical and practical implications of these findings are discussed

3D printed fluidics with embedded analytic functionality for automated reaction optimisation

Additive manufacturing or ‘3D printing’ is being developed as a novel manufacturing process for the production of bespoke micro- and milliscale fluidic devices. When coupled with online monitoring and optimisation software, this offers an advanced, customised method for performing automated chemical synthesis. This paper reports the use of two additive manufacturing processes, stereolithography and selective laser melting, to create multifunctional fluidic devices with embedded reaction monitoring capability. The selectively laser melted parts are the first published examples of multifunctional 3D printed metal fluidic devices. These devices allow high temperature and pressure chemistry to be performed in solvent systems destructive to the majority of devices manufactured via stereolithography, polymer jetting and fused deposition modelling processes previously utilised for this application. These devices were integrated with commercially available flow chemistry, chromatographic and spectroscopic analysis equipment, allowing automated online and inline optimisation of the reaction medium. This set-up allowed the optimisation of two reactions, a ketone functional group interconversion and a fused polycyclic heterocycle formation, via spectroscopic and chromatographic analysis

The N-methyl-d-aspartate receptor antagonist CPP alters synapse and spine structure and impairs long-term potentiation and long-term depression induced morphological plasticity in dentate gyrus of the awake rat

Long-term morphological synaptic changes associated with homosynaptic long-term potentiation (LTP) and heterosynaptic long-term depression (LTD) in vivo, in awake adult rats were analyzed using three-dimensional (3-D) reconstructions of electron microscope images of ultrathin serial sections from the molecular layer of the dentate gyrus. For the first time in morphological studies, the specificity of the effects of LTP and LTD on both spine and synapse ultrastructure was determined using an N-methyl-d-aspartate (NMDA) receptor antagonist CPP (3-[(R)-2-carboxypiperazin-4-yl]-propyl-1-phosphonic acid). There were no differences in synaptic density 24 h after LTP or LTD induction, and CPP alone had no effect on synaptic density. LTP increased significantly the proportion of mushroom spines, whereas LTD increased the proportion of thin spines, and both LTP and LTD decreased stubby spine number. Both LTP and LTD increased significantly spine head evaginations (spinules) into synaptic boutons and CPP blocked these changes. Synaptic boutons were smaller after LTD, indicating a pre-synaptic effect. Interestingly, CPP alone decreased bouton and mushroom spine volumes, as well as post-synaptic density (PSD) volume of mushroom spines.These data show similarities, but also some clear differences, between the effects of LTP and LTD on spine and synaptic morphology. Although CPP blocks both LTP and LTD, and impairs most morphological changes in spines and synapses, CPP alone was shown to exert effects on aspects of spine and synaptic structure

Articulation and growth of skeletal elements in balanid barnacles (Balanidae, Balanomorpha, Cirripedia)

The morphology and ultrastructure of the shells of two balanid species have been examined, paying special attention to the three types of boundaries between plates: (i) radii-parietes, (ii) alae-sheaths, and (iii) parietes-basal plate. At the carinal surfaces of the radii and at the rostral surfaces of the alae, there are series of crenulations with dendritic edges. The crenulations of the radius margins interlock with less prominent features of the opposing paries margins, whereas the surfaces of the longitudinal abutments opposing the ala margins are particularly smooth. The primary septa of the parietes also develop dendritic edges, which abut the internal surfaces of the primary tubes of the base plates. In all cases, there are chitino-proteinaceous organic membranes between the abutting structures. Our observations indicate that the very edges of the crenulations and the primary septa are permanently in contact with the organic membranes. We conclude that, when a new growth increment is going to be produced, the edges of both the crenulations and the primary septa pull the viscoelastic organic membranes locally, with the consequent formation of viscous fingers. For the abutting edges to grow, calcium carbonate must diffuse across the organic membranes, but it is not clear how growth of the organic membranes themselves is accomplished, in the absence of any cellular tissue.This research was funded by projects CGL2017-85118-P (A.G.C., C.S. and C.G.) and CGL2015-64683-P (A.B.R.N.) of the Spanish Ministerio de Economía, Industria y Competitividad, the Unidad Científica de Excelencia UCE-PP2016-05 of the University of Granada (A.G.C. and A.B.R.N.) and the Research Group RNM363 of the Junta de Andalucía (A.G.C.). N.A.L. acknowledges support from CONICYT-Chile through grant nos. FONDECYT 1140938, PCI REDES 170106 and PIA ANILLOS ACT172037, for international collaborative research with A.G.C. and A.B.R.N

3D printed fluidics with embedded analytic functionality for automated reaction optimisation

Additive manufacturing or ‘3D printing’ is being developed as a novel manufacturing process for the production of bespoke micro- and milliscale fluidic devices. When coupled with online monitoring and optimisation software, this offers an advanced, customised method for performing automated chemical synthesis. This paper reports the use of two additive manufacturing processes, stereolithography and selective laser melting, to create multifunctional fluidic devices with embedded reaction monitoring capability. The selectively laser melted parts are the first published examples of multifunctional 3D printed metal fluidic devices. These devices allow high temperature and pressure chemistry to be performed in solvent systems destructive to the majority of devices manufactured via stereolithography, polymer jetting and fused deposition modelling processes previously utilised for this application. These devices were integrated with commercially available flow chemistry, chromatographic and spectroscopic analysis equipment, allowing automated online and inline optimisation of the reaction medium. This set-up allowed the optimisation of two reactions, a ketone functional group interconversion and a fused polycyclic heterocycle formation, via spectroscopic and chromatographic analysis