381 research outputs found
Decision support tool for spatial planning and decision making; Technical support. Consultant report on the joint project mission held in SE Asia from 13th to 24th April 2007
Together with delegations of the World Bank and FAO, who carried out a project supervision mission, the consultant Gerrit Carsjens and FAO-LEAD officer Pierre Gerber carried out a technical support mission to Vietnam, Thailand and Guangdong from April 13 to 24 2007. In each country the mission comprised: 1. A workshop with invited experts on the possibilities and needs of a spatial Decision Support Tool (DST) in the form of a GIS computer model. 2. Expert consultations about potential collaborations. Important conclusions from the workshops can be summarized as follows: there is a keen interest for a spatial DST in all the countries. However it will have to take into account the needs of users at national as well as the more local level. The DST should be a tool to support strategic planning and decision making at national level as well as decision making on the allocation of livestock farms at the local level
Use of agro-climatic zones to upscale simulated crop yield potential
Yield gap analysis, which evaluates magnitude and variability of difference between crop yield potential (Yp) or water limited yield potential (Yw) and actual farm yields, provides a measure of untapped food production capacity. Reliable location-specific estimates of yield gaps, either derived from research plots or simulation models, are available only for a limited number of locations and crops due to cost and time required for field studies or for obtaining data on long-term weather, crop rotations and management practices, and soil properties. Given these constraints, we compare global agro-climatic zonation schemes for suitability to up-scale location-specific estimates of Yp and Yw, which are the basis for estimating yield gaps at regional, national, and global scales. Six global climate zonation schemes were evaluated for climatic homogeneity within delineated climate zones (CZs) and coverage of crop area. An efficient CZ scheme should strike an effective balance between zone size and number of zones required to cover a large portion of harvested area of major food crops. Climate heterogeneity was very large in CZ schemes with less than 100 zones. Of the other four schemes, the Global Yield Gap Atlas Extrapolation Domain (GYGA-ED) approach, based on a matrix of three categorical variables (growing degree days, aridity index, temperature seasonality) to delineate CZs for harvested area of all major food crops, achieved reasonable balance between number of CZs to cover 80% of global crop area and climate homogeneity within zones. While CZ schemes derived from two climate-related categorical variables require a similar number of zones to cover 80% of crop area, within-zone heterogeneity is substantially greater than for the GYGA-ED for most weather variables that are sensitive drivers of crop production. Some CZ schemes are cropspecific, which limits utility for up-scaling location-specific evaluation of yield gaps in regions with crop rotations rather than single crop species
The Layer 0 Inner Silicon Detector of the D0 Experiment
This paper describes the design, fabrication, installation and performance of
the new inner layer called Layer 0 (L0) that was inserted in the existing Run
IIa Silicon Micro-Strip Tracker (SMT) of the D0 experiment at the Fermilab
Tevatron collider. L0 provides tracking information from two layers of sensors,
which are mounted with center lines at a radial distance of 16.1 mm and 17.6 mm
respectively from the beam axis. The sensors and readout electronics are
mounted on a specially designed and fabricated carbon fiber structure that
includes cooling for sensor and readout electronics. The structure has a thin
polyimide circuit bonded to it so that the circuit couples electrically to the
carbon fiber allowing the support structure to be used both for detector
grounding and a low impedance connection between the remotely mounted hybrids
and the sensors.Comment: 28 pages, 9 figure
Electromyographic assessment of muscle fatigue in massive rotator cuff tear
Shoulder muscle fatigue has not been assessed in massive rotator cuff tear (MRCT). This study used EMG to measure fatigability of 13 shoulder muscles in 14 healthy controls and 11 patients with MRCT. A hand grip protocol was applied to minimise artifacts due to pain experience during measurement. The fatigue index (median frequency slope) was significantly non-zero (negative) for anterior, middle, and posterior parts of deltoid, supraspinatus and subscapularis muscles in the controls, and for anterior, middle, and posterior parts of deltoid, and pectoralis major in patients (p ≤ 0.001). Fatigue was significantly greater in patients compared to the controls for anterior and middle parts of deltoid and pectoralis major (p ≤ 0.001). A submaximal grip task provided a feasible way to assess shoulder muscle fatigue in MRCT patients, however with some limitations. The results suggest increased activation of deltoid is required to compensate for lost supraspinatus abduction torque. Increased pectoralis major fatigue in patients (adduction torque) likely reflected strategy to stabilise the humeral head against superior subluxing force of the deltoid. Considering physiotherapy as a primary or adjunct intervention for the management of MRCT, the findings of this study generate a base for future clinical studies aiming at the development of evidence-based protocol
Search for Higgs bosons decaying to tautau pairs in ppbar collisions at sqrt(s) = 1.96 TeV
We present a search for the production of neutral Higgs bosons decaying into
tautau pairs in ppbar collisions at a center-of-mass energy of 1.96 TeV. The
data, corresponding to an integrated luminosity of 5.4 fb-1, were collected by
the D0 experiment at the Fermilab Tevatron Collider. We set upper limits at the
95% C.L. on the product of production cross section and branching ratio for a
scalar resonance decaying into tautau pairs, and we then interpret these limits
as limits on the production of Higgs bosons in the minimal supersymmetric
standard model (MSSM) and as constraints in the MSSM parameter space.Comment: 7 pages, 5 figures, submitted to PL
Measurement of three-jet differential cross sections d sigma-3jet / d M-3jet in p anti-p collisions at sqrt(s)=1.96 TeV
We present the first measurement of the inclusive three-jet differential
cross section as a function of the invariant mass of the three jets with the
largest transverse momenta in an event in p anti-p collisions at sqrt(s) = 1.96
TeV. The measurement is made in different rapidity regions and for different
jet transverse momentum requirements and is based on a data set corresponding
to an integrated luminosity of 0.7 fb^{-1} collected with the D0 detector at
the Fermilab Tevatron Collider. The results are used to test the three-jet
matrix elements in perturbative QCD calculations at next-to-leading order in
the strong coupling constant. The data allow discrimination between
parametrizations of the parton distribution functions of the proton.Comment: 10 pages, 4 figures, 2 tables, submitted to Phys. Lett. B, corrected
chi2 values for NNPD
Search for pair production of the scalar top quark in muon+tau final states
We present a search for the pair production of scalar top quarks
(), the lightest supersymmetric partners of the top quarks, in
collisions at a center-of-mass energy of 1.96 TeV, using data
corresponding to an integrated luminosity of {7.3 } collected with the
\dzero experiment at the Fermilab Tevatron Collider. Each scalar top quark is
assumed to decay into a quark, a charged lepton, and a scalar neutrino
(). We investigate final states arising from and
. With no significant excess of events observed above the
background expected from the standard model, we set exclusion limits on this
production process in the (,) plane.Comment: Submitted to Phys. Lett.
Measurements of inclusive W+jets production rates as a function of jet transverse momentum in ppbar collisions at sqrt{s}=1.96 TeV
This Letter describes measurements of inclusive W (--> e nu) + n jet cross
sections (n = 1-4), presented as total inclusive cross sections and
differentially in the nth jet transverse momentum. The measurements are made
using data corresponding to an integrated luminosity of 4.2 fb-1 collected by
the D0 detector at the Fermilab Tevatron Collider, and achieve considerably
smaller uncertainties on W +jets production cross sections than previous
measurements. The measurements are compared to next-to-leading order
perturbative QCD (pQCD) calculations in the n =1-3 jet multiplicity bins and to
leading order pQCD calculations in the 4-jet bin. The measurements are
generally in agreement with pQCD predictions, although certain regions of phase
space are identified where the calculations could be improved
Measurement of spin correlation in ttbar production using dilepton final states
We measure the correlation between the spin of the top quark and the spin of
the anti-top quark in (ttbar -> W+ W- b bbar -> l+ nu b l- nubar bbar) final
states produced in ppbar collisions at a center of mass energy sqrt(s)=1.96
TeV, where l is an electron or muon. The data correspond to an integrated
luminosity of 5.4 fb-1 and were collected with the D0 detector at the Fermilab
Tevatron collider. The correlation is extracted from the angles of the two
leptons in the t and tbar rest frames, yielding a correlation strength C=
0.10^{+0.45}_{-0.45}, in agreement with the NLO QCD prediction within two
standard deviations, but also in agreement with the no correlation hypothesis.Comment: 10 pages, 3 figures, submitted to PL
Search for single top quarks in the tau+jets channel using 4.8 fb of collision data
We present the first direct search for single top quark production using tau
leptons. The search is based on 4.8 fb of integrated luminosity
collected in collisions at =1.96 TeV with the D0 detector
at the Fermilab Tevatron Collider. We select events with a final state
including an isolated tau lepton, missing transverse energy, two or three jets,
one or two of them tagged. We use a multivariate technique to discriminate
signal from background. The number of events observed in data in this final
state is consistent with the signal plus background expectation. We set in the
tau+jets channel an upper limit on the single top quark cross section of
\TauLimObs pb at the 95% C.L. This measurement allows a gain of 4% in expected
sensitivity for the observation of single top production when combining it with
electron+jets and muon+jets channels already published by the D0 collaboration
with 2.3 fb of data. We measure a combined cross section of
\SuperCombineXSall pb, which is the most precise measurement to date.Comment: 12 pages, 5 figure
- …