Failure of liquid storage tanks due to earthquake excitation

Above ground liquid storage tanks have suffered serious damage during earthquakes. The damage of tanks can vary from local yielding or buckling of the tank wall, to loss of contents, or to collapse which leads to an unrepairable tank. Considerable work has been carried out on this problem with varying degree of success. However, the results are largely directed toward response rather than failure prediction. The information on failure mechanisms is very limited. The present work consists of scale model testing, correlation with existing analysis and failure prediction with laboratory verification. The scale model testing incorporates dynamic similarity of the fluid/structure interaction problem. The model study shows that small plastic models can be useful in studying the dynamics and buckling of liquid-filled tanks under ground excitation even though the model does not display complete similitude, The buckling criterion proposed in this study is based upon static considerations and the complex stress field in the shell wall is supplanted by a simple field for which analytical/ experimental results are available. Harmonic buckling tests demonstrate that the static buckling criterion is satisfactory even though the prebuckling stress field is time dependent, The harmonic buckling tests, when correlated with the stresses from a response analysis, also indicate that the buckling is largely dependent upon the n=1 response, Transient buckling tests are also carried out and the results show that the linear analysis together with the static buckling criterion gives a good prediction of the failure of a full fluid-filled tank. The test parameters in these buckling tests include water depth, title angle, thickness of tank wall, top end condition, ground excitation pattern, etc. In addition, buckling tests of unanchored tanks are conducted to study the influence of changing the anchorage of the tank base. An analytical model is suggested to predict the response of an unanchored tank due to overturning moment. The current design criterion of an unanchored tank is also. assessed in this study. The results of this investigation, in addition to those carried out previously, provide a better understanding of the forced vibration problem, failure criterion and appropriate design procedure for a liquid storage tank

System dynamic simulation of precision segmented reflector

A joint effort was undertaken on a Precision Segmented Reflector (PSR) Project. The missions in which the PSR is to be used will use large (up to 20 m in diameter) telescopes. The essential requirement for the telescopes is that the reflector surface of the primary mirror must be made extremely precise to allow no more than a few microns of errors and, additionally, this high surface precision must be maintained when the telescope is subjected to on-orbital mechanical and thermal disturbances. Based on the mass, size, and stability considerations, reflector surface formed by segmented, probably actively or passively controlled, composite panels are regarded as most suitable for future space based astronomical telescope applications. In addition to the design and fabrication of composite panels with a surface error of less than 3 microns RMS, PSR also develops related reflector structures, materials, control, and sensing technologies. As part of the planning effort for PSR Technology Demonstration, a system model which couples the reflector, consisting of panels, support truss and actuators, and the optical bench was assembled for dynamic simulations. Random vibration analyses using seismic data obtained from actual measurements at the test site designated for PSR Technology Demonstration are described

Highly deformable actuators made of dielectric elastomers clamped by rigid rings

In the nascent field of soft machines, soft materials are used to create devices that actuate robots, sense environment, monitor health, and harvest energy. The soft materials undergo large deformation in response to external stimuli, often leading to instability that is usually undesirable but sometimes useful. Here, we study a dielectric elastomer membrane sandwiched between two soft conductors, rolled into a hollow tube, pre-stretched in the hoop direction, and fixed at the ends of the tube to two rigid rings. This structure functions as an electromechanical transducer when the two rings are subject to a mechanical force and the two conductors are subject to an electrical voltage. We formulate a computational model by using a variational principle and calculate the large and inhomogeneous deformation by solving a nonlinear boundary-value problem. We demonstrate that large actuation strains are achievable when the height-to-radius ratio of the tube is small and the hoop pre-stretch is large. The model provides a tool to analyze various modes of instability and optimize the electromechanical performance.Engineering and Applied Science

Giant, Voltage-Actuated Deformation of a Dielectric Elastomer under Dead Load

Far greater voltage-actuated deformation is achievable for a dielectric elastomer under equal-biaxial dead load than under rigid constraint usually employed. Areal strains of 488% are demonstrated. The dead load suppresses electric breakdown, enabling the elastomer to survive the snap-through electromechanical instability. The breakdown voltage is found to increase with the voltage ramp rate. A nonlinear model for viscoelastic dielectric elastomers is developed and shown to be consistent with the experimental observations.Engineering and Applied Science

Stretchable, Transparent, Ionic Conductors

Existing stretchable, transparent conductors are mostly electronic conductors. They limit the performance of interconnects, sensors, and actuators as components of stretchable electronics and soft machines. We describe a class of devices enabled by ionic conductors that are highly stretchable, fully transparent to light of all colors, and capable of operation at frequencies beyond 10 kilohertz and voltages above 10 kilovolts. We demonstrate a transparent actuator that can generate large strains and a transparent loudspeaker that produces sound over the entire audible range. The electromechanical transduction is achieved without electrochemical reaction. The ionic conductors have higher resistivity than many electronic conductors; however, when large stretchability and high transmittance are required, the ionic conductors have lower sheet resistance than all existing electronic conductors.Chemistry and Chemical BiologyEngineering and Applied SciencesOther Research Uni

Cyclic performance of viscoelastic dielectric elastomers with solid hydrogel electrodes

Hydrogels containing electrolyte can work as ionic conductors to actuate dielectric elastomer (DE) artificial muscles. Based on a popular design of a circular actuator, we study theoretically and experimentally the cyclic performance of acrylic DE actuators with solid hydrogel electrodes. The viscoelasticity of solid electrodes constrains the maximum strain that is attainable for one cycle of triangular voltage, and it also diminishes the accumulated increment of the maximum strain after many cycles of loadings.Engineering and Applied Science

User Preferences and Persona Design for an mHealth Intervention to Support Adherence to Cardiovascular Disease Medication in Singapore: A Multi-Method Study.

BACKGROUND: The use of mobile health (mHealth) has gained popularity globally, including for its use in a variety of health interventions, particularly through short message service (SMS) text messaging. However, there are challenges to the use of mHealth, particularly among older users who have a large heterogeneity in usability and accessibility barriers when using technology. OBJECTIVE: In order to better understand and conceptualize the diversity of users and give insight into their particular needs, we turned to persona creation. Personas are user archetypes created through data generated from multi-method inquiry with actual target users. Personas are an appropriate yet largely underutilized component of current mHealth research. METHODS: Leveraging data from a multi-method study conducted in Singapore with an ethnically diverse population including Chinese, Malay, and Indian participants, we used a proforma to analyze data from the qualitative component (ie, 20 in-depth interviews) and quantitative component (ie, 100 interviewer-guided surveys). We then identified key characteristics, including technology use and preferences as well as adherence factors, to synthesize five personas reflective of persons over the age of 40 years in Singapore with atherosclerotic cardiovascular disease (ASCVD) or ASCVD risk factors, such as hypertension. RESULTS: We present five personas typologized as (1) The Quiet Analog, (2) The Busy Grandparent, (3) The Socializer, (4) The Newly Diagnosed, and (5) The Hard-to-Reach. We report on four key characteristics: health care access, medication adherence, mobile phone technology usage (ie, ownership, access, and utilization), and interest in mHealth. Finally, we provide insights into how these personas may be used in the design and implementation of an mHealth intervention. Our work demonstrates how multi-method data can create biopsychosocial personas that can be used to explore and address the diversity in behaviors, preferences, and needs in user groups. CONCLUSIONS: With wider adoption of mHealth, it is important that we consider user-centered design techniques and design thinking in order to create meaningful, patient-centered interventions for adherence to medications. Future research in this area should include greater exploration of how these five personas can be used to better understand how and when is best to deliver mHealth interventions in Singapore and beyond

Antimicrobial resistance among migrants in Europe: a systematic review and meta-analysis

BACKGROUND: Rates of antimicrobial resistance (AMR) are rising globally and there is concern that increased migration is contributing to the burden of antibiotic resistance in Europe. However, the effect of migration on the burden of AMR in Europe has not yet been comprehensively examined. Therefore, we did a systematic review and meta-analysis to identify and synthesise data for AMR carriage or infection in migrants to Europe to examine differences in patterns of AMR across migrant groups and in different settings. METHODS: For this systematic review and meta-analysis, we searched MEDLINE, Embase, PubMed, and Scopus with no language restrictions from Jan 1, 2000, to Jan 18, 2017, for primary data from observational studies reporting antibacterial resistance in common bacterial pathogens among migrants to 21 European Union-15 and European Economic Area countries. To be eligible for inclusion, studies had to report data on carriage or infection with laboratory-confirmed antibiotic-resistant organisms in migrant populations. We extracted data from eligible studies and assessed quality using piloted, standardised forms. We did not examine drug resistance in tuberculosis and excluded articles solely reporting on this parameter. We also excluded articles in which migrant status was determined by ethnicity, country of birth of participants' parents, or was not defined, and articles in which data were not disaggregated by migrant status. Outcomes were carriage of or infection with antibiotic-resistant organisms. We used random-effects models to calculate the pooled prevalence of each outcome. The study protocol is registered with PROSPERO, number CRD42016043681. FINDINGS: We identified 2274 articles, of which 23 observational studies reporting on antibiotic resistance in 2319 migrants were included. The pooled prevalence of any AMR carriage or AMR infection in migrants was 25·4% (95% CI 19·1-31·8; I2 =98%), including meticillin-resistant Staphylococcus aureus (7·8%, 4·8-10·7; I2 =92%) and antibiotic-resistant Gram-negative bacteria (27·2%, 17·6-36·8; I2 =94%). The pooled prevalence of any AMR carriage or infection was higher in refugees and asylum seekers (33·0%, 18·3-47·6; I2 =98%) than in other migrant groups (6·6%, 1·8-11·3; I2 =92%). The pooled prevalence of antibiotic-resistant organisms was slightly higher in high-migrant community settings (33·1%, 11·1-55·1; I2 =96%) than in migrants in hospitals (24·3%, 16·1-32·6; I2 =98%). We did not find evidence of high rates of transmission of AMR from migrant to host populations. INTERPRETATION: Migrants are exposed to conditions favouring the emergence of drug resistance during transit and in host countries in Europe. Increased antibiotic resistance among refugees and asylum seekers and in high-migrant community settings (such as refugee camps and detention facilities) highlights the need for improved living conditions, access to health care, and initiatives to facilitate detection of and appropriate high-quality treatment for antibiotic-resistant infections during transit and in host countries. Protocols for the prevention and control of infection and for antibiotic surveillance need to be integrated in all aspects of health care, which should be accessible for all migrant groups, and should target determinants of AMR before, during, and after migration. FUNDING: UK National Institute for Health Research Imperial Biomedical Research Centre, Imperial College Healthcare Charity, the Wellcome Trust, and UK National Institute for Health Research Health Protection Research Unit in Healthcare-associated Infections and Antimictobial Resistance at Imperial College London

Anaesthesiology & Critical Care Postgraduate Training in Malaysia : training curriculum

This document is the National Postgraduate Medical Curriculum (NPMC) for Anaesthesiology and Critical Care, and is part of the NPMC Project which is intended to cover the development of curricula for all clinical medical specialists in Malaysia. It is to ensure that the training is consistent and competency based, and meets the standards required by the respective national bodies and the National Specialist Register (NSR)