3,237 research outputs found
Activation of transforming growth factor-β(1 )and early atherosclerosis in systemic lupus erythematosus
The efficiency of activating latent transforming growth factor (TGF)-β(1 )in systemic lupus erythematosus (SLE) may control the balance between inflammation and fibrosis, modulating the disease phenotype. To test this hypothesis we studied the ability to activate TGF-β(1 )in SLE patients and control individuals within the context of inflammatory disease activity, cumulative organ damage and early atherosclerosis. An Activation Index (AI) for TGF-β(1 )was determined for 32 patients with SLE and 33 age-matched and sex-matched control individuals by quantifying the increase in active TGF-β(1 )under controlled standard conditions. Apoptosis in peripheral blood mononuclear cells was determined by fluorescence-activated cell sorting. Carotid artery intima-media thickness was measured using standard Doppler ultrasound. These measures were compared between patients and control individuals. In an analysis conducted in patients, we assessed the associations of these measures with SLE phenotype, including early atherosclerosis. Both intima-media thickness and TGF-β(1 )AI for SLE patients were within the normal range. There was a significant inverse association between TGF-β(1 )AI and levels of apoptosis in peripheral blood mononuclear cells after 24 hours in culture for both SLE patients and control individuals. Only in SLE patients was there a significant negative correlation between TGF-β(1 )AI and low-density lipoprotein cholesterol (r = -0.404; P = 0.022) and between TGF-β(1 )AI and carotid artery intima-media thickness (r = -0.587; P = 0.0004). A low AI was associated with irreversible damage (SLICC [Systemic Lupus International Collaborating Clinics] Damage Index ≥1) and was inversely correlated with disease duration. Intima-media thickness was significantly linked to total cholesterol (r = 0.371; P = 0.037). To conclude, in SLE low normal TGF-β(1 )activation was linked with increased lymphocyte apoptosis, irreversible organ damage, disease duration, calculated low-density lipoprotein levels and increased carotid IMT, and may contribute to the development of early atherosclerosis
Low-Frequency Measurements of Seismic Moduli and Attenuation in Antigorite Serpentinite
Laboratory measurements of seismic moduli and attenuation in antigorite serpentinite at a confining pressure of 200 MPa and temperatures up to 550 °C provide new results relevant to the interpretation of geophysical data in subduction zones. A polycrystalline antigorite specimen was tested via forced oscillations at small strain amplitudes and seismic frequencies (millihertz to hertz). The shear modulus has a temperature sensitivity, ∂G/∂T, averaging −0.017 GPa/K. Increasing temperature above 500 °C results in more intensive shear attenuation ( equation/grl58579-math-0001.png) and associated modulus dispersion, with equation/grl58579-math-0002.png increasing monotonically with increasing oscillation period and temperature. This “background” relaxation is adequately captured by a Burgers model for viscoelasticity and possibly results from intergranular mechanisms. Attenuation is higher in antigorite ( equation/grl58579-math-0003.png at 550 °C and 0.01 Hz) than in olivine ( equation/grl58579-math-0004.png below 800 °C), but such contrast does not appear to be strong enough to allow robust identification of antigorite from seismic models of attenuation only
Kinematic dynamo in spherical Couette flow
We investigate numerically kinematic dynamos driven by flow of electrically
conducting fluid in the shell between two concentric differentially rotating
spheres, a configuration normally referred to as spherical Couette flow. We
compare between axisymmetric (2D) and fully three dimensional flows, between
low and high global rotation rates, between prograde and retrograde
differential rotations, between weak and strong nonlinear inertial forces,
between insulating and conducting boundaries, and between two aspect ratios.
The main results are as follows. Azimuthally drifting Rossby waves arising from
the destabilisation of the Stewartson shear layer are crucial to dynamo action.
Differential rotation and helical Rossby waves combine to contribute to the
spherical Couette dynamo. At a slow global rotation rate, the direction of
differential rotation plays an important role in the dynamo because of
different patterns of Rossby waves in prograde and retrograde flows. At a rapid
global rotation rate, stronger flow supercriticality (namely the difference
between the differential rotation rate of the flow and its critical value for
the onset of nonaxisymmetric instability) facilitates the onset of dynamo
action. A conducting magnetic boundary condition and a larger aspect ratio both
favour dynamo action
Triggering change in diabetes care delivery in general practice: a qualitative evaluation approach using the clinical microsystem framework
Brain-Computer Interface Robotics for Hand Rehabilitation After Stroke: A Systematic Review
Background
Hand rehabilitation is core to helping stroke survivors regain activities of daily living. Recent studies have suggested that the use of electroencephalography-based brain-computer interfaces (BCI) can promote this process. Here, we report the first systematic examination of the literature on the use of BCI-robot systems for the rehabilitation of fine motor skills associated with hand movement and profile these systems from a technical and clinical perspective.
Methods
A search for January 2010–October 2019 articles using Ovid MEDLINE, Embase, PEDro, PsycINFO, IEEE Xplore and Cochrane Library databases was performed. The selection criteria included BCI-hand robotic systems for rehabilitation at different stages of development involving tests on healthy participants or people who have had a stroke. Data fields include those related to study design, participant characteristics, technical specifications of the system, and clinical outcome measures.
Results
30 studies were identified as eligible for qualitative review and among these, 11 studies involved testing a BCI-hand robot on chronic and subacute stroke patients. Statistically significant improvements in motor assessment scores relative to controls were observed for three BCI-hand robot interventions. The degree of robot control for the majority of studies was limited to triggering the device to perform grasping or pinching movements using motor imagery. Most employed a combination of kinaesthetic and visual response via the robotic device and display screen, respectively, to match feedback to motor imagery.
Conclusion
19 out of 30 studies on BCI-robotic systems for hand rehabilitation report systems at prototype or pre-clinical stages of development. We identified large heterogeneity in reporting and emphasise the need to develop a standard protocol for assessing technical and clinical outcomes so that the necessary evidence base on efficiency and efficacy can be developed
Is an ecosystem services-based approach developed for setting specific protection goals for plant protection products applicable to other chemicals?
Clearly defined protection goals specifying what to protect, where and when, are required for designing scientifically sound risk assessments and effective risk management of chemicals. Environmental protection goals specified in EU legislation are defined in general terms, resulting in uncertainty in how to achieve them. In 2010, the European Food Safety Authority (EFSA) published a framework to identify more specific protection goals based on ecosystem services potentially affected by plant protection products. But how applicable is this framework to chemicals with different emission scenarios and receptor ecosystems? Four case studies used to address this question were: (i) oil refinery waste water exposure in estuarine environments; (ii) oil dispersant exposure in aquatic environments; (iii) down the drain chemicals exposure in a wide range of ecosystems (terrestrial and aquatic); (iv) persistent organic pollutant exposure in remote (pristine) Arctic environments. A four-step process was followed to identify ecosystems and services potentially impacted by chemical emissions and to define specific protection goals. Case studies demonstrated that, in principle, the ecosystem services concept and the EFSA framework can be applied to derive specific protection goals for a broad range of chemical exposure scenarios. By identifying key habitats and ecosystem services of concern, the approach offers the potential for greater spatial and temporal resolution, together with increased environmental relevance, in chemical risk assessments. With modifications including improved clarity on terminology/definitions and further development/refinement of the key concepts, we believe the principles of the EFSA framework could provide a methodical approach to the identification and prioritization of ecosystems, ecosystem services and the service providing units that are most at risk from chemical exposure
Global maps of the magnetic thickness and magnetization of the Earth’s lithosphere
International audienceWe have constructed global maps of the large-scale magnetic thickness and magnetization of Earth's lithosphere. Deriving such large-scale maps based on lithospheric magnetic field measurements faces the challenge of the masking effect of the core field. In this study, the maps were obtained through analyses in the spectral domain by means of a new regional spatial power spectrum based on the Revised Spherical Cap Harmonic Analysis (R-SCHA) formalism. A series of regional spectral analyses were conducted covering the entire Earth. The R-SCHA surface power spectrum for each region was estimated using the NGDC-720 spherical harmonic (SH) model of the lithospheric magnetic field, which is based on satellite, aeromagnetic, and marine measurements. These observational regional spectra were fitted to a recently proposed statistical expression of the power spectrum of Earth's lithospheric magnetic field, whose free parameters include the thickness and magnetization of the magnetic sources. The resulting global magnetic thickness map is compared to other crustal and magnetic thickness maps based upon different geophysical data. We conclude that the large-scale magnetic thickness of the lithosphere is on average confined to a layer that does not exceed the Moho
Role of urothelial cells in BCG immunotherapy for superficial bladder cancer
Intravesical instillation of Bacillus Calmette-Guérin (BCG) is used for the treatment of superficial bladder cancer, both to reduce the recurrence rate of bladder tumour and to diminish the risk of progression. Since its first therapeutic application in 1976, major research efforts have been directed to decipher the exact mechanism of action of the BCG-associated antitumour effect. Bacillus Calmette-Guérin causes an extensive local inflammatory reaction in the bladder wall. Of this, the massive appearance of cytokines in the urine of BCG-treated patients stands out. Activated lymphocytes and macrophages are the most likely sources of these cytokines, but at present other cellular sources such as urothelial tumour cells cannot be ruled out. Bacillus Calmette-Guérin is internalised and processed both by professional antigen-presenting cells and urothelial tumour cells, resulting in an altered gene expression of these cells that accumulates in the presentation of BCG antigens and secretion of particular cytokine
Lead-free piezoceramics - Where to move on?
Lead-free piezoceramics aiming at replacing the market-dominant lead-based ones have been extensively searched for more than a decade worldwide. Some noteworthy outcomes such as the advent of commercial products for certain applications have been reported, but the goal, i.e., the invention of a lead-free piezocermic, the performance of which is equivalent or even superior to that of PZT-based piezoceramics, does not seem to be fulfilled yet. Nevertheless, the academic effort already seems to be culminated, waiting for a guideline to a future research direction. We believe that a driving force for a restoration of this research field needs to be found elsewhere, for example, intimate collaborations with related industries. For this to be effectively realized, it would be helpful for academic side to understand the interests and demands of the industry side as well as to provide the industry with new scientific insights that would eventually lead to new applications. Therefore, this review covers some of the issues that are to be studied further and deeper, so-to-speak, lessons from the history of piezoceramics, and some technical issues that could be useful in better understanding the industry demands. As well, the efforts made in the industry side will be briefly introduced for the academic people to catch up with the recent trends and to be guided for setting up their future research direction effectively.ope
Ready or not? Expectations of faculty and medical students for clinical skills preparation for clerkships
Background: Preclerkship clinical-skills training has received increasing attention as a foundational preparation for clerkships. Expectations among medical students and faculty regarding the clinical skills and level of skill mastery needed for starting clerkships are unknown. Medical students, faculty teaching in the preclinical setting, and clinical clerkship faculty may have differing expectations of students entering clerkships. If students' expectations differ from faculty expectations, students may experience anxiety. Alternately, congruent expectations among students and faculty may facilitate integrated and seamless student transitions to clerkships. Aims: To assess the congruence of expectations among preclerkship faculty, clerkship faculty, and medical students for the clinical skills and appropriate level of clinical-skills preparation needed to begin clerkships. Methods: Investigators surveyed preclinical faculty, clerkship faculty, and medical students early in their basic clerkships at a North American medical school that focuses on preclerkship clinical-skills development. Survey questions assessed expectations for the appropriate level of preparation in basic and advanced clinical skills for students entering clerkships. Results: Preclinical faculty and students had higher expectations than clerkship faculty for degree of preparation in most basic skills. Students had higher expectations than both faculty groups for advanced skills preparation. Conclusions: Preclinical faculty, clerkship faculty, and medical students appear to have different expectations of clinical-skills training needed for clerkships. As American medical schools increasingly introduce clinical-skills training prior to clerkships, more attention to alignment, communication, and integration between preclinical and clerkship faculty will be important to establish common curricular agendas and increase integration of student learning. Clarification of skills expectations may also alleviate student anxiety about clerkships and enhance their learning
- …