90 research outputs found
Studies on muon tomography for archaeological internal structures scanning
International audienceMuon tomography is a potential non-invasive technique for internal structure scanning. It has already interesting applications in geophysics and can be used for archaeological purposes. Muon tomography is based on the measurement of the muon flux after crossing the structure studied. Differences on the mean density of these structures imply differences on the detected muon rate for a given direction. Based on this principle, Monte Carlo simulations represent a useful tool to provide a model of the expected muon rate and angular distribution depending on the composition of the studied object, being useful to estimate the expected detected muons and to better understand the experimental results. These simulations are mainly dependent on the geometry and composition of the studied object and on the modelling of the initial muon flux at surface. In this work, the potential of muon tomography in archaeology is presented and evaluated with Monte Carlo simulations by estimating the differences on the muon rate due to the presence of internal structures and its composition. The influence of the chosen muon model at surface in terms of energy and angular distributions in the final result has been also studied. 1. Introduction Among the different applications that muon tomography can have, the scanning of archaeological structures is one of the most innovative one. The principle of the method is straightforward. By detecting the muons that cross the studied object and reconstructing their directions, it is possible to identify the existence of significant differences in the muon rate for a given direction. These differences, consequence of a variation of the mean density of the object traversed by the muons, indicate the possible existence of an internal structure inside the object. The reconstruction of these internal structures by the analysis of the directions of the registered muons is frequently called inverse method. Some features of muon tomography are specially interesting for archaeology. It is a passive method since it is based on the detection of the atmospheric muons, which are naturally produced. Moreover, it is a non-invasive technique since the detector would be placed outside the object to study or, if possible, inside it if internal corridors and halls already exist, as i
The TIANSHAN Radio Experiment for Neutrino Detection
An antenna array devoted to the autonomous radio-detection of high energy
cosmic rays is being deployed on the site of the 21 cm array radio telescope in
XinJiang, China. Thanks in particular to the very good electromagnetic
environment of this remote experimental site, self-triggering on extensive air
showers induced by cosmic rays has been achieved with a small scale prototype
of the foreseen antenna array. We give here a detailed description of the
detector and present the first detection of extensive air showers with this
prototype.Comment: 37 pages, 15 figures. Astroparticle Physics (in press
Background Light in Potential Sites for the ANTARES Undersea Neutrino Telescope
The ANTARES collaboration has performed a series of {\em in situ}
measurements to study the background light for a planned undersea neutrino
telescope. Such background can be caused by K decays or by biological
activity. We report on measurements at two sites in the Mediterranean Sea at
depths of 2400~m and 2700~m, respectively. Three photomultiplier tubes were
used to measure single counting rates and coincidence rates for pairs of tubes
at various distances. The background rate is seen to consist of three
components: a constant rate due to K decays, a continuum rate that
varies on a time scale of several hours simultaneously over distances up to at
least 40~m, and random bursts a few seconds long that are only correlated in
time over distances of the order of a meter. A trigger requiring coincidences
between nearby photomultiplier tubes should reduce the trigger rate for a
neutrino telescope to a manageable level with only a small loss in efficiency.Comment: 18 pages, 8 figures, accepted for publication in Astroparticle
Physic
Status and Recent Results of the Acoustic Neutrino Detection Test System AMADEUS
The AMADEUS system is an integral part of the ANTARES neutrino telescope in
the Mediterranean Sea. The project aims at the investigation of techniques for
acoustic neutrino detection in the deep sea. Installed at a depth of more than
2000m, the acoustic sensors of AMADEUS are based on piezo-ceramics elements for
the broad-band recording of signals with frequencies ranging up to 125kHz.
AMADEUS was completed in May 2008 and comprises six "acoustic clusters", each
one holding six acoustic sensors that are arranged at distances of roughly 1m
from each other. The clusters are installed with inter-spacings ranging from
15m to 340m. Acoustic data are continuously acquired and processed at a
computer cluster where online filter algorithms are applied to select a
high-purity sample of neutrino-like signals. 1.6 TB of data were recorded in
2008 and 3.2 TB in 2009. In order to assess the background of neutrino-like
signals in the deep sea, the characteristics of ambient noise and transient
signals have been investigated. In this article, the AMADEUS system will be
described and recent results will be presented.Comment: 7 pages, 8 figures. Proceedings of ARENA 2010, the 4th International
Workshop on Acoustic and Radio EeV Neutrino Detection Activitie
Performance of the first prototype of the CALICE scintillator strip electromagnetic calorimeter
A first prototype of a scintillator strip-based electromagnetic calorimeter
was built, consisting of 26 layers of tungsten absorber plates interleaved with
planes of 45x10x3 mm3 plastic scintillator strips. Data were collected using a
positron test beam at DESY with momenta between 1 and 6 GeV/c. The prototype's
performance is presented in terms of the linearity and resolution of the energy
measurement. These results represent an important milestone in the development
of highly granular calorimeters using scintillator strip technology. This
technology is being developed for a future linear collider experiment, aiming
at the precise measurement of jet energies using particle flow techniques
Infrastructure for Detector Research and Development towards the International Linear Collider
The EUDET-project was launched to create an infrastructure for developing and
testing new and advanced detector technologies to be used at a future linear
collider. The aim was to make possible experimentation and analysis of data for
institutes, which otherwise could not be realized due to lack of resources. The
infrastructure comprised an analysis and software network, and instrumentation
infrastructures for tracking detectors as well as for calorimetry.Comment: 54 pages, 48 picture
Search for Supernova Neutrino-Bursts with the AMANDA Detector
The core collapse of a massive star in the Milky Way will produce a neutrino
burst, intense enough to be detected by existing underground detectors. The
AMANDA neutrino telescope located deep in the South Pole ice can detect MeV
neutrinos by a collective rate increase in all photo-multipliers on top of dark
noise. The main source of light comes from positrons produced in the
CC-reaction of anti-electron neutrinos on free protons \antinue + p \to e^+ +
n. This paper describes the first supernova search performed on the full sets
of data taken during 1997 and 1998 (215 days of live time) with 302 of the
detector's optical modules. No candidate events resulted from this search. The
performance of the detector is calculated, yielding a 70% coverage of the
Galaxy with one background fake per year with 90% efficiency for the detector
configuration under study. An upper limit at the 90% c.l. on the rate of
stellar collapses in the Milky Way is derived, yielding 4.3 events per year. A
trigger algorithm is presented and its performance estimated. Possible
improvements of the detector hardware are reviewed.Comment: 20 pages, 14 figures. Submitted to Astroparticle Physic
- âŠ