3,373 research outputs found
Magnetic Field Effects on the Structure and Evolution of Overdense Radiatively Cooling Jets
We investigate the effect of magnetic fields on the propagation dynamics and
morphology of overdense, radiatively cooling, supermagnetosonic jets, with the
help of fully three-dimensional SPMHD simulations. Evaluated for a set of
parameters which are mainly suitable for protostellar jets (with density ratios
between the jet and the ambient medium 3-10, and ambient Mach number ~ 24),
these simulations are also compared with baseline non-magnetic and adiabatic
calculations. We find that, after amplification by compression and
re-orientation in nonparallel shocks at the working surface, the magnetic field
that is carried backward with the shocked gas into the cocoon improves the jet
collimation relative to the purely hydrodynamic (HD) systems. Low-amplitude,
approximately equally spaced internal shocks (which are absent in the HD
systems) are produced by MHD K-H reflection pinch modes. The longitudinal field
geometry also excites non-axisymmetric helical modes which cause some beam
wiggling. The strength and amount of these modes are, however, reduced (by ~
twice) in the presence of radiative cooling relative to the adiabatic cases.
Besides, a large density ratio between the jet and the ambient medium also
reduces, in general, the number of the internal shocks. As a consequence, the
weakness of the induced internal shocks makes it doubtful that the magnetic
pinches could produce by themselves the bright knots observed in the overdense,
radiatively cooling protostellar jets.Comment: To appear in ApJ; 36 pages + 16 (gif) figures. PostScript files of
figures are available at http://www.iagusp.usp.br/preprints/preprint.htm
Utilization of galactomannan from Gleditsia triacanthos in polysaccharide-based films : effects of interactions between film constituents on film properties
The objective of this work was to evaluate the effect of the concentrations of Gleditsia triacanthos galactomannan and glycerol and the presence of corn oil in the physical properties of edible films. The influence of interactions between those constituents on films' permeability to gases (water vapour, CO2 and O2), solubility in water, mechanical properties and colour was evaluated. The effects of those variables were analysed according to a 23 factorial design; regression coefficients were used to understand the influence of each variable (factor) on the studied properties, and a multifactor model was developed. Results show that galactomannan concentration is the most significant factor affecting the studied properties; moreover, the increase of plasticizer concentration and the presence of oil showed to be the most influent in the particular cases of solubility and transport properties (water vapour permeability and O2 permeability), respectively. These results show that galactomannan films' properties can be tailored to allow their use as alternative to non-biodegradable, non-edible packaging materials.The author M. A. Cerqueira is recipient of a fellowship from Fundacao para a Ciencia e Tecnologia (FCT, SFRH/BPD/72753/2010) and B. W. S. Souza is a recipient of a fellowship from the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior, Brazil (Capes, Brazil)
Effects of Brazil's political crisis on the science needed for biodiversity conservation.
The effects of Brazil's political crisis on science funding necessary for biodiversity conservation are likely to be global. Brazil is not only the world?s most biodiverse nation, it is responsible for the greater part of the Amazon forest, which regulates the climate and provides rain to much of southern South America. Brazil was a world leader in satellite monitoring of land-use change, in-situ biodiversity monitoring, reduction in tropical-forest deforestation, protection of indigenous lands, and a model for other developing nations. Coordinated public responses will be necessary to prevent special-interest groups from using the political crisis to weaken science funding, environmental legislation and law enforcement
Compostos orgânicos e resíduos da cadeia produtiva do arroz como substrato para produção de mudas de cana-de-açúcar.
O objetivo do presente trabalho foi determinar o potencial agronômico de substratos produzidos a base de um composto orgânico para a produção, a partir de minitoletes, de mudas de cana-de-açúcar genótipo RB86751
Calibration of myocardial T2 and T1 against iron concentration.
BACKGROUND: The assessment of myocardial iron using T2* cardiovascular magnetic resonance (CMR) has been validated and calibrated, and is in clinical use. However, there is very limited data assessing the relaxation parameters T1 and T2 for measurement of human myocardial iron.
METHODS: Twelve hearts were examined from transfusion-dependent patients: 11 with end-stage heart failure, either following death (n=7) or cardiac transplantation (n=4), and 1 heart from a patient who died from a stroke with no cardiac iron loading. Ex-vivo R1 and R2 measurements (R1=1/T1 and R2=1/T2) at 1.5 Tesla were compared with myocardial iron concentration measured using inductively coupled plasma atomic emission spectroscopy.
RESULTS: From a single myocardial slice in formalin which was repeatedly examined, a modest decrease in T2 was observed with time, from mean (± SD) 23.7 ± 0.93 ms at baseline (13 days after death and formalin fixation) to 18.5 ± 1.41 ms at day 566 (p<0.001). Raw T2 values were therefore adjusted to correct for this fall over time. Myocardial R2 was correlated with iron concentration [Fe] (R2 0.566, p<0.001), but the correlation was stronger between LnR2 and Ln[Fe] (R2 0.790, p<0.001). The relation was [Fe] = 5081•(T2)-2.22 between T2 (ms) and myocardial iron (mg/g dry weight). Analysis of T1 proved challenging with a dichotomous distribution of T1, with very short T1 (mean 72.3 ± 25.8 ms) that was independent of iron concentration in all hearts stored in formalin for greater than 12 months. In the remaining hearts stored for <10 weeks prior to scanning, LnR1 and iron concentration were correlated but with marked scatter (R2 0.517, p<0.001). A linear relationship was present between T1 and T2 in the hearts stored for a short period (R2 0.657, p<0.001).
CONCLUSION: Myocardial T2 correlates well with myocardial iron concentration, which raises the possibility that T2 may provide additive information to T2* for patients with myocardial siderosis. However, ex-vivo T1 measurements are less reliable due to the severe chemical effects of formalin on T1 shortening, and therefore T1 calibration may only be practical from in-vivo human studies
Fusion of Color Doppler and Magnetic Resonance Images of the Heart
This study was designed to establish and analyze color Doppler and magnetic resonance fusion images of the heart, an approach for simultaneous testing of cardiac pathological alterations, performance, and hemodynamics. Ten volunteers were tested in this study. The echocardiographic images were produced by Philips IE33 system and the magnetic resonance images were generated from Philips 3.0-T system. The fusion application was implemented on MATLAB platform utilizing image processing technology. The fusion image was generated from the following steps: (1) color Doppler blood flow segmentation, (2) image registration of color Doppler and magnetic resonance imaging, and (3) image fusion of different image types. The fusion images of color Doppler blood flow and magnetic resonance images were implemented by MATLAB programming in our laboratory. Images and videos were displayed and saved as AVI and JPG. The present study shows that the method we have developed can be used to fuse color flow Doppler and magnetic resonance images of the heart. We believe that the method has the potential to: fill in information missing from the ultrasound or MRI alone, show structures outside the field of view of the ultrasound through MR imaging, and obtain complementary information through the fusion of the two imaging methods (structure from MRI and function from ultrasound)
Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC
The uncertainty on the calorimeter energy response to jets of particles is
derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the
calorimeter response to single isolated charged hadrons is measured and
compared to the Monte Carlo simulation using proton-proton collisions at
centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009
and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter
response to specific types of particles (positively and negatively charged
pions, protons, and anti-protons) is measured and compared to the Monte Carlo
predictions. Finally, the jet energy scale uncertainty is determined by
propagating the response uncertainty for single charged and neutral particles
to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3%
for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table,
submitted to European Physical Journal
Human adipose stem cells cell sheet constructs impact epidermal morphogenesis in full-thickness excisional wounds
Among the wide range of strategies to target skin repair/regeneration, tissue engineering (TE) with stem cells at the forefront, remains as the most promising route. Cell sheet (CS) engineering is herein proposed, taking advantage of particular cell-cell and cell-extracellular matrix (ECM) interactions and subsequent cellular milieu, to create 3D TE constructs to promote full-thickness skin wound regeneration. Human adipose derived stem cells (hASCs) CS were obtained within five days using both thermoresponsive and standard cell culture surfaces. hASCs-based constructs were then built by superimposing three CS and transplanted into full-thickness excisional mice skin wounds with delayed healing. Constructs obtained using thermoresponsive surfaces were more stable than the ones from standard cell culture surfaces due to the natural adhesive character of the respective CS. Both CS-generating strategies lead to prolonged hASCs engraftment, although no transdifferentiation phenomena were observed. Moreover, our findings suggest that the transplanted hASCs might be promoting neotissue vascularization and extensively influencing epidermal morphogenesis, mainly through paracrine actions with the resident cells. The thicker epidermis, with a higher degree of maturation characterized by the presence of rete ridges-like structures, as well as a significant number of hair follicles observed after transplantation of the constructs combining the CS obtained from the thermoresponsive surfaces, reinforced the assumptions of the influence of the transplanted hASCs and the importance of the higher stability of these constructs promoted by cohesive cell-cell and cell-ECM interactions. Overall, this study confirmed the potential of hASCs CS-based constructs to treat full-thickness excisional skin wounds and that their fabrication conditions impact different aspects of skin regeneration, such as neovascularisation, but mainly epidermal morphogenesis.We would like to thank Hospital da Prelada (Porto), in particular, to Dr. Paulo Costa for the lipoaspirates collection and for financial support by Skingineering (PTDC/SAU-OSM/099422/2008), Portuguese Foundation for Science and Technology (FCT) funded project. The research leading to these results has also received funding from the European Union's Seventh Framework Programme (FP7/2007-2013) under Grant Agreement No. REGPOT-CT2012-316331-POLARIS
Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics
A detailed study is presented of the expected performance of the ATLAS
detector. The reconstruction of tracks, leptons, photons, missing energy and
jets is investigated, together with the performance of b-tagging and the
trigger. The physics potential for a variety of interesting physics processes,
within the Standard Model and beyond, is examined. The study comprises a series
of notes based on simulations of the detector and physics processes, with
particular emphasis given to the data expected from the first years of
operation of the LHC at CERN
- …