Fabrication and evaluation of bilateral Helmholtz radiofrequency coil for thermo-stable breast image with reduced artifacts

PURPOSE: The positron emission tomography (PET)-magnetic resonance (MR) system is a newly emerging technique that yields hybrid images with high-resolution anatomical and metabolic information. With PET-MR imaging, a definitive diagnosis of breast abnormalities will be possible with high spatial accuracy and images will be acquired for the optimal fusion of anatomic locations. Therefore, we propose a PET-compatible two-channel breast MR coil with minimal disturbance to image acquisition which can be used for simultaneous PET-MR imaging in patients with breast cancer. MATERIALS AND METHODS: For coil design and construction, the conductor loops of the Helmholtz coil were tuned, matched, and subdivided with nonmagnetic components. Element values were optimized with an electromagnetic field simulation. Images were acquired on a GE 600 PET-computed tomography (CT) and GE 3.0 T MR system. For this study, we used the T1-weighted image (volunteer; repetition time (TR), 694 ms; echo time (TE), 9.6 ms) and T2-weighted image (phantom; TR, 8742 ms; TE, 104 ms) with the fast spin-echo sequence. RESULTS: The results of measuring image factors with the proposed radiofrequency (RF) coil and standard conventional RF coil were as follows: signal-to-noise ratio (breast; 207.7 vs. 175.2), percent image uniformity (phantom; 89.22%-91.27% vs. 94.63%-94.77%), and Hounsfield units (phantom; -4.51 vs. 2.38). CONCLUSIONS: Our study focused on the feasibility of proposed two-channel Helmholtz loops (by minimizing metallic components and soldering) for PET-MR imaging and found the comparable image quality to the standard conventional coil. We believe our work will help significantly to improve image quality with the development of a less metallic breast MR coil

A Case of Portal Vein Thrombosis by Protein C and S Deficiency Completely Recanalized by Anticoagulation Therapy

Portal vein thrombosis (PVT) is a rare form of venous thrombosis that affects the hepatic portal vein flow, which can lead to portal hypertension. Treatment of PVT includes anticoagulants, thrombolysis, insertion of shunts, bypass surgery, and liver transplantation. Single anticoagulation therapy is not regarded as a curative treatment but can be associated with a reduction in new thrombotic episodes. We experienced a case of acute total occlusion of PVT provoked by protein C and S deficiency syndrome. PVT was completely recanalized with oral anticoagulant therapy following low molecular weight heparin therapy

Dual function filtration and catalytic breakdown of organic pollutants in wastewater using ozonation with titania and alumina membranes

Water recycling via treatment from industrial and/or municipal waste sources is one of the key strategies for resolving water shortages worldwide. Polymer membranes are effective at improving the water quality essential for recycling, but depend on regular cleaning and replacement. Pure ceramic membranes can reduce the cleaning need and last significantly longer in the same applications while possessing the possibility of operating in more aggressive environments not suitable for polymers. In the current work, filtration using a tubular ceramic membrane (�-Al2O3 or TiO2) was combined with ozonation to remove organic compounds present in a secondary effluent to enhance key quality features of the water (colour and total organic carbon, TOC) for its potential reuse. ‘Bare’ commercial �-Al2O3 filters (pore size ∼0.58 �m) were tested as a microfiltration membrane and compared with the more advanced catalytically active TiO2 layer that was formed by the sol–gel method. The presence of anatase with a 4 nm pore size at the membrane surface was confirmed by X-ray diffraction (XRD) and N2 adsorption. Filtration of the effluent over a 2 h period led to a reduction in flux to 45% and 60% of the initial values for the �-alumina and TiO2 membrane, respectively. However, a brief dose (2 min) of ozone at the start of the run resulted in reductions to only 70% of the initial flux for both membranes. It is likely that the oxide’s functional property facilitated the formation of hydroxyl (OH•) or other radicals on the membrane surface from ozone decomposition which targeted the breakdown of organic foulants thus inhibiting their deposition. Interestingly, the porous structure therefore acted in a synergistic, dual function mode to physically separate the particulates while also catalytically breaking down organic matter. The system also greatly improved the efficiency of membrane filtration for the reduction of colour, A254 (organics absorption at the wavelength of 254 nm) and TOC. The best performance came from combined ozonation (2 min ozonation time with an estimated applied ozone dose of 8 mg L−1) with the TiO2 membrane, which was able to reduce colour by 88%, A254 by 75% and TOC by 43%. It is clearly evident that a synergistic effect occurs with the process combination of ozonation and ceramic membrane filtration demonstrating the practical benefit of combining ceramic membrane filtration with conventional water ozonation

Strategy for preventing excessive wear rate at high loads in bulk metallic glass composites

The effect of nickel additions to tune the wear performance of Cu45.5Zr51Al3.5 at.% alloy has been studied to present a new strategy for preventing excessive wear rate at high loads in metallic glass composites. This strategy consists on proper selection of a doping element in controlled concentrations with the ability to decrease the glass transition temperature (Tg) of the alloy so that the friction temperature during sliding is close to the Tg. This enables the formation of crystalline phases and their subsequent oxidation (lubricating layer) on the contact surface during sliding thus enhancing the wear resistance. Proper doping can also contribute towards the wear resistance when the content of the doping element promotes the martensitic transformation. The results show that the main wear mechanism for the three studied alloys (Cu45.5Zr51Al3.5, Cu44.5Zr51Al3.5Ni1 and Cu43.5Zr51Al3.5Ni2 at.%) is governed by delamination and the mass loss increases with increasing load from 1 to 10 N. However, for the maximum load of 15 N, the calculated friction temperature is close to Tg for the Ni-containing alloys and partial crystallization and oxidation take place resulting in a mass loss decrease from about 2.6 mg (at 10 N) to about 2.1 mg (at 15 N)

Modeling Electrical Percolation to optimize the Electromechanical Properties of CNT/Polymer Composites in Highly Stretchable Fiber Strain Sensors

Abstract: A simulation model of electrical percolation through a three-dimensional network of curved CNTs is developed in order to analyze the electromechanical properties of a highly stretchable fiber strain sensor made of a CNT/polymer composite. Rigid-body movement of the curved CNTs within the polymer matrix is described analytically. Random arrangements of CNTs within the composite are generated by a Monte-Carlo simulation method and a union-find algorithm is utilized to investigate the network percolation. Consequently, the strain-induced resistance change curves are obtained in a wide strain range of the composite. In order to compare our model with experimental results, two CNT/polymer composite fibers were fabricated and tested as strain sensors. Their effective CNT volume fractions are estimated by comparing the experimental data with our simulation model. The results confirm that the proposed simulation model reproduces well the experimental data and is useful for predicting and optimizing the electromechanical characteristics of highly stretchable fiber strain sensors based on CNT/polymer composites

ICAR: endoscopic skull‐base surgery

n/