929 research outputs found
Design and assembly sequence analysis of option 3 for CETF reference space station
A design and assembly sequence was conducted on one option of the Dual Keel Space Station examined by a NASA Critical Evaluation Task Force to establish viability of several variations of that option. A goal of the study was to produce and analyze technical data to support Task Force decisions to either examine particular Option 3 variations in more depth or eliminate them from further consideration. An analysis of the phasing assembly showed that use of an Expendable Launch Vehicle in conjunction with the Space Transportation System (STS) can accelerate the buildup of the Station and ease the STS launch rate constraints. The study also showed that use of an Orbital Maneuvering Vehicle on the first flight can significantly benefit Station assembly and, by performing Station subsystem functions, can alleviate the need for operational control and reboost systems during the early flights. In addition to launch and assembly sequencing, the study assessed stability and control, and analyzed node-packaging options and the effects of keel removal on the structural dynamics of the Station. Results of these analyses are presented and discussed
Evaluation of Load transfer in rigid pavements by Rolling wheel deflectometer and Falling weight deflectometer
Rigid pavements have widespread use, e.g, in motorways and airports, due to their excellent properties such as high bearing capacity and long lifetime. However, when rigid pavements fail it is often due to bad load transfer efficiency (LTE) at its joints. Traditional methods of measuring LTE can be time consuming. Here, we study the possibility of measuring LTE using a moving load with the aim of achieving higher productivity. An experiment simulating Rolling Weight Deflectometer (RWD) measurements on a joint was carried out to gain understanding and confidence that can guide the analysis of real RWD data. Continuous data from measurements across a joint allows for determination of not only the LTE but also additional parameters characterizing the pavement and the joint. A semi-analytical model was implemented for simulating the pavement response next to a joint and used for interpretation and verification of the experimental data. The results show promise for the use of moving loads for rapid evaluation of joints
Antibody Labelling of Resilin in Energy Stores for Jumping in Plant Sucking Insects
The rubbery protein resilin appears to form an integral part of the energy storage structures that enable many insects to jump by using a catapult mechanism. In plant sucking bugs that jump (Hemiptera, Auchenorrhyncha), the energy generated by the slow contractions of huge thoracic jumping muscles is stored by bending composite bow-shaped parts of the internal thoracic skeleton. Sudden recoil of these bows powers the rapid and simultaneous movements of both hind legs that in turn propel a jump. Until now, identification of resilin at these storage sites has depended exclusively upon characteristics that may not be specific: its fluorescence when illuminated with specific wavelengths of ultraviolet (UV) light and extinction of that fluorescence at low pH. To consolidate identification we have labelled the cuticular structures involved with an antibody raised against a product of the Drosophila CG15920 gene. This encodes pro-resilin, the first exon of which was expressed in E. coli and used to raise the antibody. We show that in frozen sections from two species, the antibody labels precisely those parts of the metathoracic energy stores that fluoresce under UV illumination. The presence of resilin in these insects is thus now further supported by a molecular criterion that is immunohistochemically specific
From L-Dopa to Dihydroxyphenylacetaldehyde: A Toxic Biochemical Pathway Plays a Vital Physiological Function in Insects
One protein in Aedes aegypti, classified into the aromatic amino acid decarboxylase (AAAD) family based on extremely high sequence homology (∼70%) with dopa decarboxylase (Ddc), was biochemically investigated. Our data revealed that this predicted AAAD protein use L-dopa as a substrate, as does Ddc, but it catalyzes the production of 3,4-dihydroxylphenylacetaldehyde (DHPAA) directly from L-dopa and apparently has nothing to do with the production of any aromatic amine. The protein is therefore named DHPAA synthase. This subsequently led to the identification of the same enzyme in Drosophila melanogaster, Anopheles gambiae and Culex quinquefasciatus by an initial prediction of putative DHPAA synthase based on sequence homology and subsequent verification of DHPAA synthase identity through protein expression and activity assays. DHPAA is highly toxic because its aldehyde group readily reacts with the primary amino groups of proteins, leading to protein crosslinking and inactivation. It has previously been demonstrated by several research groups that Drosophila DHPAA synthase was expressed in tissues that produce cuticle materials and apparent defects in regions of colorless, flexible cuticular structures have been observed in its gene mutants. The presence of free amino groups in proteins, the high reactivity of DHPAA with the free amino groups, and the genetically ascertained function of the Drosophila DHPAA synthase in the formation of colorless, flexible cuticle, when taken together, suggest that mosquito and Drosophila DHPAA synthases are involved in the formation of flexible cuticle through their reactive DHPAA-mediated protein crosslinking reactions. Our data illustrate how a seemingly highly toxic pathway can serve for an important physiological function in insects
A single muscle moves a crustacean limb joint rhythmically by acting against a spring containing resilin
Pre-treatment HIV-drug resistance associated with virologic outcome of first-line NNRTI-antiretroviral therapy: A cohort study in Kenya
Background: Pre-treatment HIV-drug-resistance (PDR) to WHO-recommended 1st-line non-nucleoside reverse transcriptase inhibitors (NNRTI)-based antiretroviral treatment (ART) is increasing in low-resource communities. We evaluated the risk of PDR on treatment failure if detected at single or multiple codons, at minority (2–9%) or higher (≥10%) frequencies during efavirenz- vs. nevirapine-ART.
Methods: We conducted a pooled analysis across three cohorts of Kenyans initiating 1st-line NNRTI-ART between 2006 and 2014. Mutations K103N, Y181C, G190A, M184V and K65R were detected by an oligonucleotide ligation assay (OLA) and confirmed by Sanger and next-generation sequencing (NGS). PDR was defined as detection of any mutation by OLA when confirmed by NGS. Treatment failure, defined as plasma HIV RNA ≥400 copies/mL at month-12 of ART, was compared by PDR genotypes.
Findings: PDR was detected in 59/1231 (4·8%) participants. Compared to wild-type genotypes, PDR in participants prescribed nevirapine-ART was associated with increased treatment failure [PDR 69·2% (27/39) vs. wild-type 10·4% (70/674); p = 0·0001], whether detected as minority [66·7% (4/6)] or higher [69·7% (23/33)] frequencies in an individual\u27s HIV quasispecies (p = 0·002 and p \u3c 0·0001, respectively), or mutations at single [50·0% (12/24)] or multiple [100·0% (15/15)] codons (p \u3c 0·0001). During efavirenz-ART, PDR was also associated with increased virologic failure [PDR 25·0% (5/20) vs. wild-type 5·0% (25/498); p = 0·005], but only if detected at multiple drug-resistant codons [50·0% (3/6); p = 0·003] or high frequencies PDR [33·3% (5/15); p = 0·001].
Interpretation: The risk that PDR confers for treatment failure varies by number of mutant codons and their frequency in the quasispecies, with a lower risk for efavirenz- compared to nevirapine-based regimens. PDR detection and management could extend the effective use of efavirenz-ART in low-resource settings.
Funding: NIH, PEPFAR
Resilin and chitinous cuticle form a composite structure for energy storage in jumping by froghopper insects
RIGHTS : This article is licensed under the BioMed Central licence at http://www.biomedcentral.com/about/license which is similar to the 'Creative Commons Attribution Licence'. In brief you may : copy, distribute, and display the work; make derivative works; or make commercial use of the work - under the following conditions: the original author must be given credit; for any reuse or distribution, it must be made clear to others what the license terms of this work are.Abstract Background Many insects jump by storing and releasing energy in elastic structures within their bodies. This allows them to release large amounts of energy in a very short time to jump at very high speeds. The fastest of the insect jumpers, the froghopper, uses a catapult-like elastic mechanism to achieve their jumping prowess in which energy, generated by the slow contraction of muscles, is released suddenly to power rapid and synchronous movements of the hind legs. How is this energy stored? Results The hind coxae of the froghopper are linked to the hinges of the ipsilateral hind wings by pleural arches, complex bow-shaped internal skeletal structures. They are built of chitinous cuticle and the rubber-like protein, resilin, which fluoresces bright blue when illuminated with ultra-violet light. The ventral and posterior end of this fluorescent region forms the thoracic part of the pivot with a hind coxa. No other structures in the thorax or hind legs show this blue fluorescence and it is not found in larvae which do not jump. Stimulating one trochanteral depressor muscle in a pattern that simulates its normal action, results in a distortion and forward movement of the posterior part of a pleural arch by 40 μm, but in natural jumping, the movement is at least 100 μm. Conclusion Calculations showed that the resilin itself could only store 1% to 2% of the energy required for jumping. The stiffer cuticular parts of the pleural arches could, however, easily meet all the energy storage needs. The composite structure therefore, combines the stiffness of the chitinous cuticle with the elasticity of resilin. Muscle contractions bend the chitinous cuticle with little deformation and therefore, store the energy needed for jumping, while the resilin rapidly returns its stored energy and thus restores the body to its original shape after a jump and allows repeated jumping
Identification of a cyclin B1-derived CTL epitope eliciting spontaneous responses in both cancer patients and healthy donors
With the aim to identify cyclin B1-derived peptides with high affinity for HLA-A2, we used three in silico prediction algorithms to screen the protein sequence for possible HLA-A2 binders. One peptide scored highest in all three algorithms, and the high HLA-A2-binding affinity of this peptide was verified in an HLA stabilization assay. By stimulation with peptide-loaded dendritic cells a CTL clone was established, which was able to kill two breast cancer cell lines in an HLA-A2-dependent and peptide-specific manner, demonstrating presentation of the peptide on the surface of cancer cells. Furthermore, blood from cancer patients and healthy donors was screened for spontaneous T-cell reactivity against the peptide in IFN-γ ELISPOT assays. Patients with breast cancer, malignant melanoma, or renal cell carcinoma hosted powerful and high-frequency T-cell responses against the peptide. In addition, when blood from healthy donors was tested, similar responses were observed. Ultimately, serum from cancer patients and healthy donors was analyzed for anti-cyclin B1 antibodies. Humoral responses against cyclin B1 were frequently detected in both cancer patients and healthy donors. In conclusion, a high-affinity cyclin B1-derived HLA-A2-restricted CTL epitope was identified, which was presented on the cell surface of cancer cells, and elicited spontaneous T-cell responses in cancer patients and healthy donors
The Distribution of GYR- and YLP-Like Motifs in Drosophila Suggests a General Role in Cuticle Assembly and Other Protein-Protein Interactions
Background: Arthropod cuticle is composed predominantly of a self-assembling matrix of chitin and protein. Genes encoding structural cuticular proteins are remarkably abundant in arthropod genomes, yet there has been no systematic survey of conserved motifs across cuticular protein families. Methodology/Principal Findings: Two short sequence motifs with conserved tyrosines were identified in Drosophila cuticular proteins that were similar to the GYR and YLP Interpro domains. These motifs were found in members of the CPR, Tweedle, CPF/CPFL, and (in Anopheles gambiae) CPLCG cuticular protein families, and the Dusky/Miniature family of cuticleassociated proteins. Tweedle proteins have a characteristic motif architecture that is shared with the Drosophila protein GCR1 and its orthologs in other species, suggesting that GCR1 is also cuticular. A resilin repeat, which has been shown to confer elasticity, matched one of the motifs; a number of other Drosophila proteins of unknown function exhibit a motif architecture similar to that of resilin. The motifs were also present in some proteins of the peritrophic matrix and the eggshell, suggesting molecular convergence among distinct extracellular matrices. More surprisingly, gene regulation, development, and proteolysis were statistically over-represented ontology terms for all non-cuticular matches in Drosophila. Searches against other arthropod genomes indicate that the motifs are taxonomically widespread. Conclusions: This survey suggests a more general definition for GYR and YLP motifs and reveals their contribution to severa
- …