3D tehnika digitalne obrade svetlosti (DLP) primenjena u izradi dvoslojnih tableta: koncept kombinovane polipilule

Ever since 3D printing was introduced to the field of pharmacy, it has caused a paradigm shift from the manufacturing of large-scale to small batches of medicines tailored accordingly to the specific needs of patients. This study aimed to formulate and fabricate two-layered 3D tablets using the digital light processing (DLP) technique. Hydrochlorothiazide (HHT,5%,w/w) and warfarin sodium (WS,5%,w/w) were selected as model drugs. The printing process was initiated with 0.1% of photoinitiator, at a constant ratio of poly(ethylene glycol)diacrylate and poly(ethylene glycol) 400, 1:1, with the addition of water (10%,w/w). Single-layered tablets of 8.00 mm diameter and 1.50 mm thickness, containing HHT and WS respectively, were successfully printed, as well as combined two-layered 3D tablets, with each of the active substances in separate layers. Dissolution tests of single-layered tablets showed immediate, but incomplete release of WS (81.47±1.47%, after 45min), and prolonged and complete release of HHT (98.17±3.11%, after 8h), while significantly slower and incomplete release of both drugs from the combined two-layered 3D tablets was observed. The absence of drug-polymer interaction and presence of a layered cross-sectional tablet structure were confirmed. DLP technique enables simple and rapid fabrication of combined two-layered 3D tablets, while further optimization of formulation factors is necessary to achieve complete drug release.Uvođenje tehnologije 3D štampe u oblasti farmacije uslovilo je razvoj fundamentalnih promena, pri čemu serijska proizvodnja velikih šarži pretenduje da bude zamenjena malim serijama lekova prilagođenih prema specifičnim potrebama pacijenata. Cilj istraživanja bio je da se formulišu i izrade dvoslojne tablete primenom tehnike digitalne obrade svetlosti (DLP). Hidrohlortiazid (HHT, 5%, m/m) i varfarin-natrijum (WS, 5%, m/m) odabrani su kao model lekovite supstance. Proces štampanja sproveden je u prisustvu 0,1% fotoinicijatora, pri konstantnom masenom odnosu poli(etilen glikol)diakrilata i poli(etilen glikola) 400, 1:1, uz dodatak 10% vode. Jednoslojne 3D tablete prečnika 8,00 mm i debljine 1,50 mm, koje sadrže HHT, odnosno WS, kao i kombinovane dvoslojne 3D tablete, sa svakom od aktivnih supstanci u posebnom sloju, uspešno su odštampane. Prilikom ispitivanja brzine rastvaranja lekovite supstance iz jednoslojnih tableta, došlo je do trenutnog (81,47±1,47%, nakon 45 min), ali nepotpunog oslobađanja WS, i produženog i potpunog oslobađanja HHT (98,17±3,11%, nakon 8 h), dok je iz kombinovanih tableta zapaženo znatno sporije i nepotpuno oslobađanje obe lekovite supstance. Potvrđeno je odsustvo interakcija i prisustvo slojevite strukture. DLP tehnika pruža mogućnost jednostavne i brze izrade kombinovanih tableta, pri čemu je dalja optimizacija formulacionih faktora neophodna u cilju postizanja potpunog oslobađanja lekovite supstance

Long-Term Outcome after Rehabilitation of Bilateral Total Hip Arthroplasty in Renal Transplant Recipient – A Case Report

INTRODUCTION: Total hip replacement is generally proposed for renal transplant patients with avascular osteonecrosis of the femoral head.PURPOSE: The purpose of the study is to report the long-term outcome after rehabilitation of bilateral total hip arthroplasty in a patient with renal transplantation suffering from avascular osteonecrosis of the both femoral heads.MATERIAL AND METHOD: The patient S.D, 49 years old at follow-up. Few months after renal transplantation, the patient had got avascular osteonecrosis of both femoral head. One year after transplantation the total hip arthroplasty for both hip joints were performed. Three years later repeat total hip arthroplasty surgery for left hip was performed. After any surgery intervention the patient was referred for inpatient rehabilitation. For clinical assessment the clinical findings and Harris Hip Score have been used. The rehabilitation program consisted of exercises, occupational therapy, and patient education. RESULTS: After any rehabilitation treatment the patient had improvement of clinical findings. At follow-up assessment outcome for both hip function was good - Harris Hip Score was 81 points.CONCLUSION: Rehabilitation is integral part of multidisciplinary treatment of renal transplant recipient after total hip arthroplasty. Regular exercise training of these patients is very important for improving of their long-term outcome

Combined searches for the production of supersymmetric top quark partners in proton-proton collisions at root s=13 TeV

A combination of searches for top squark pair production using proton-proton collision data at a center-of-mass energy of 13 TeV at the CERN LHC, corresponding to an integrated luminosity of 137 fb(-1) collected by the CMS experiment, is presented. Signatures with at least 2 jets and large missing transverse momentum are categorized into events with 0, 1, or 2 leptons. New results for regions of parameter space where the kinematical properties of top squark pair production and top quark pair production are very similar are presented. Depending on themodel, the combined result excludes a top squarkmass up to 1325 GeV for amassless neutralino, and a neutralinomass up to 700 GeV for a top squarkmass of 1150 GeV. Top squarks with masses from 145 to 295 GeV, for neutralino masses from 0 to 100 GeV, with a mass difference between the top squark and the neutralino in a window of 30 GeV around the mass of the top quark, are excluded for the first time with CMS data. The results of theses searches are also interpreted in an alternative signal model of dark matter production via a spin-0 mediator in association with a top quark pair. Upper limits are set on the cross section for mediator particle masses of up to 420 GeV

Calibration of the CMS hadron calorimeters using proton-proton collision data at root s=13 TeV

Methods are presented for calibrating the hadron calorimeter system of theCMSetector at the LHC. The hadron calorimeters of the CMS experiment are sampling calorimeters of brass and scintillator, and are in the form of one central detector and two endcaps. These calorimeters cover pseudorapidities vertical bar eta vertical bar ee data. The energy scale of the outer calorimeters has been determined with test beam data and is confirmed through data with high transverse momentum jets. In this paper, we present the details of the calibration methods and accuracy.Peer reviewe

Probing effective field theory operators in the associated production of top quarks with a Z boson in multilepton final states at root s=13 TeV

Peer reviewe

Measurement of the W gamma Production Cross Section in Proton-Proton Collisions at root s=13 TeV and Constraints on Effective Field Theory Coefficients

A fiducial cross section for W gamma production in proton-proton collisions is measured at a center-of-mass energy of 13 TeV in 137 fb(-1) of data collected using the CMS detector at the LHC. The W -> e nu and mu nu decay modes are used in a maximum-likelihood fit to the lepton-photon invariant mass distribution to extract the combined cross section. The measured cross section is compared with theoretical expectations at next-to-leading order in quantum chromodynamics. In addition, 95% confidence level intervals are reported for anomalous triple-gauge couplings within the framework of effective field theory.Peer reviewe

Reconstruction of signal amplitudes in the CMS electromagnetic calorimeter in the presence of overlapping proton-proton interactions

A template fitting technique for reconstructing the amplitude of signals produced by the lead tungstate crystals of the CMS electromagnetic calorimeter is described. This novel approach is designed to suppress the contribution to the signal of the increased number of out-of-time interactions per beam crossing following the reduction of the accelerator bunch spacing from 50 to 25 ns at the start of Run 2 of the LHC. Execution of the algorithm is sufficiently fast for it to be employed in the CMS high-level trigger. It is also used in the offline event reconstruction. Results obtained from simulations and from Run 2 collision data (2015-2018) demonstrate a substantial improvement in the energy resolution of the calorimeter over a range of energies extending from a few GeV to several tens of GeV.Peer reviewe

Search for top squark pair production in a final state with two tau leptons in proton-proton collisions at root s=13 TeV

A search for pair production of the supersymmetric partner of the top quark, the top squark, in proton-proton collision events at s = 13 TeV is presented in a final state containing hadronically decaying tau leptons and large missing transverse momentum. This final state is highly sensitive to high-tan beta or higgsino-like scenarios in which decays of electroweak gauginos to tau leptons are dominant. The search uses a data set corresponding to an integrated luminosity of 77.2 fb(-1), which was recorded with the CMS detector during 2016 and 2017. No significant excess is observed with respect to the background prediction. Exclusion limits at 95% confidence level are presented in the top squark and lightest neutralino mass plane within the framework of simplified models, in which top squark masses up to 1100 GeV are excluded for a nearly massless neutralino.Peer reviewe

Measurement of the t(t)over-barb(b)over-bar production cross section in the all-jet final state in pp collisions at root s=13 TeV

A measurement of the production cross section of top quark pairs in association with two b jets (t (t) over barb (b) over bar) is presented using data collected in proton-proton collisions at root s=13 TeV by the CMS detector at the LHC corresponding to an integrated luminosity of 35.9 fb(-1). The cross section is measured in the all-jet decay channel of the top quark pair by selecting events containing at least eight jets, of which at least two are identified as originating from the hadronization of b quarks. A combination of multivariate analysis techniques is used to reduce the large background from multijet events not containing a top quark pair, and to help discriminate between jets originating from top quark decays and other additional jets. The cross section is determined for the total phase space to be 5.5 +/- 0.3 (stat)(-1.3)(+)(1.6) (syst)pb and also measured for two fiducial t (t) over barb (b) over bar, definitions. The measured cross sections are found to be larger than theoretical predictions by a factor of 1.5-2.4, corresponding to 1-2 standard deviations. (C) 2020 The Author. Published by Elsevier B.V.Peer reviewe

Measurement of the top quark Yukawa coupling from t(t)over-bar kinematic distributions in the dilepton final state in proton-proton collisions at root s=13 TeV

Peer reviewe