Architectures for Adaptive Low-Power Embedded Multimedia Systems

This Ph.D. thesis describes novel hardware/software architectures for adaptive low-power embedded multimedia systems. Novel techniques for run-time adaptive energy management are proposed, such that both HW & SW adapt together to react to the unpredictable scenarios. A complete power-aware H.264 video encoder was developed. Comparison with state-of-the-art demonstrates significant energy savings while meeting the performance constraint and keeping the video quality degradation unnoticeable

VThreads: A novel VLIW chip multiprocessor with hardware-assisted PThreads

We discuss VThreads, a novel VLIW CMP with hardware-assisted shared-memory Thread support. VThreads supports Instruction Level Parallelism via static multiple-issue and Thread Level Parallelism via hardware-assisted POSIX Threads along with extensive customization. It allows the instantiation of tightlycoupled streaming accelerators and supports up to 7-address Multiple-Input, Multiple-Output instruction extensions. VThreads is designed in technology-independent Register-Transfer-Level VHDL and prototyped on 40 nm and 28 nm Field-Programmable gate arrays. It was evaluated against a PThreads-based multiprocessor based on the Sparc-V8 ISA. On a 65 nm ASIC implementation VThreads achieves up to x7.2 performance increase on synthetic benchmarks, x5 on a parallel Mandelbrot implementation, 66% better on a threaded JPEG implementation, 79% better on an edge-detection benchmark and ~13% improvement on DES compared to the Leon3MP CMP. In the range of 2 to 8 cores VThreads demonstrates a post-route (statistical) power reduction between 65% to 57% at an area increase of 1.2%-10% for 1-8 cores, compared to a similarly-configured Leon3MP CMP. This combination of micro-architectural features, scalability, extensibility, hardware support for low-latency PThreads, power efficiency and area make the processor an attractive proposition for low-power, deeply-embedded applications requiring minimum OS support

RISPP: A Run-time Adaptive Reconfigurable Embedded Processor

This Ph.D. thesis describes a new approach for adaptive processors using a reconfigurable fabric (embedded FPGA) to implement application-specific accelerators. A novel modular Special Instruction composition is presented along with a run-time system that exploits the provided adaptivity. The approach was simulated and prototyped using and FPGA. Comparisons with state-of-the-art appl.-specific and reconf. processors demonstrate significant improvements according the performance and efficiency

Efficient reconfigurable architectures for 3D medical image compression

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Recently, the more widespread use of three-dimensional (3-D) imaging modalities, such as magnetic resonance imaging (MRI), computed tomography (CT), positron emission tomography (PET), and ultrasound (US) have generated a massive amount of volumetric data. These have provided an impetus to the development of other applications, in particular telemedicine and teleradiology. In these fields, medical image compression is important since both efficient storage and transmission of data through high-bandwidth digital communication lines are of crucial importance. Despite their advantages, most 3-D medical imaging algorithms are computationally intensive with matrix transformation as the most fundamental operation involved in the transform-based methods. Therefore, there is a real need for high-performance systems, whilst keeping architectures exible to allow for quick upgradeability with real-time applications. Moreover, in order to obtain efficient solutions for large medical volumes data, an efficient implementation of these operations is of significant importance. Reconfigurable hardware, in the form of field programmable gate arrays (FPGAs) has been proposed as viable system building block in the construction of high-performance systems at an economical price. Consequently, FPGAs seem an ideal candidate to harness and exploit their inherent advantages such as massive parallelism capabilities, multimillion gate counts, and special low-power packages. The key achievements of the work presented in this thesis are summarised as follows. Two architectures for 3-D Haar wavelet transform (HWT) have been proposed based on transpose-based computation and partial reconfiguration suitable for 3-D medical imaging applications. These applications require continuous hardware servicing, and as a result dynamic partial reconfiguration (DPR) has been introduced. Comparative study for both non-partial and partial reconfiguration implementation has shown that DPR offers many advantages and leads to a compelling solution for implementing computationally intensive applications such as 3-D medical image compression. Using DPR, several large systems are mapped to small hardware resources, and the area, power consumption as well as maximum frequency are optimised and improved. Moreover, an FPGA-based architecture of the finite Radon transform (FRAT)with three design strategies has been proposed: direct implementation of pseudo-code with a sequential or pipelined description, and block random access memory (BRAM)- based method. An analysis with various medical imaging modalities has been carried out. Results obtained for image de-noising implementation using FRAT exhibits promising results in reducing Gaussian white noise in medical images. In terms of hardware implementation, promising trade-offs on maximum frequency, throughput and area are also achieved. Furthermore, a novel hardware implementation of 3-D medical image compression system with context-based adaptive variable length coding (CAVLC) has been proposed. An evaluation of the 3-D integer transform (IT) and the discrete wavelet transform (DWT) with lifting scheme (LS) for transform blocks reveal that 3-D IT demonstrates better computational complexity than the 3-D DWT, whilst the 3-D DWT with LS exhibits a lossless compression that is significantly useful for medical image compression. Additionally, an architecture of CAVLC that is capable of compressing high-definition (HD) images in real-time without any buffer between the quantiser and the entropy coder is proposed. Through a judicious parallelisation, promising results have been obtained with limited resources. In summary, this research is tackling the issues of massive 3-D medical volumes data that requires compression as well as hardware implementation to accelerate the slowest operations in the system. Results obtained also reveal a significant achievement in terms of the architecture efficiency and applications performance.Ministry of Higher Education Malaysia (MOHE), Universiti Tun Hussein Onn Malaysia (UTHM) and the British Counci

VThreads: A novel VLIW chip multiprocessor with hardware-assisted PThreads

This paper was accepted for publication in the journal Microprocessors and Microsystems and the definitive published version is available at http://dx.doi.org/10.1016/j.micpro.2016.07.010.We discuss VThreads, a novel VLIW CMP with hardware-assisted shared-memory Thread support. VThreads supports Instruction Level Parallelism via static multiple-issue and Thread Level Parallelism via hardware-assisted POSIX Threads along with extensive customization. It allows the instantiation of tightlycoupled streaming accelerators and supports up to 7-address Multiple-Input, Multiple-Output instruction extensions. VThreads is designed in technology-independent Register-Transfer-Level VHDL and prototyped on 40 nm and 28 nm Field-Programmable gate arrays. It was evaluated against a PThreads-based multiprocessor based on the Sparc-V8 ISA. On a 65 nm ASIC implementation VThreads achieves up to x7.2 performance increase on synthetic benchmarks, x5 on a parallel Mandelbrot implementation, 66% better on a threaded JPEG implementation, 79% better on an edge-detection benchmark and ~13% improvement on DES compared to the Leon3MP CMP. In the range of 2 to 8 cores VThreads demonstrates a post-route (statistical) power reduction between 65% to 57% at an area increase of 1.2%-10% for 1-8 cores, compared to a similarly-configured Leon3MP CMP. This combination of micro-architectural features, scalability, extensibility, hardware support for low-latency PThreads, power efficiency and area make the processor an attractive proposition for low-power, deeply-embedded applications requiring minimum OS support

Architectural explorations for streaming accelerators with customized memory layouts

El concepto básico de la arquitectura mono-nucleo en los procesadores de propósito general se ajusta bien a un modelo de programación secuencial. La integración de multiples núcleos en un solo chip ha permitido a los procesadores correr partes del programa en paralelo. Sin embargo, la explotación del enorme paralelismo disponible en muchas aplicaciones de alto rendimiento y de los datos correspondientes es difícil de conseguir usando unicamente multicores de propósito general. La aparición de aceleradores tipo streaming y de los correspondientes modelos de programación han mejorado esta situación proporcionando arquitecturas orientadas al proceso de flujos de datos. La idea básica detrás del diseño de estas arquitecturas responde a la necesidad de procesar conjuntos enormes de datos. Estos dispositivos de alto rendimiento orientados a flujos permiten el procesamiento rapido de datos mediante el uso eficiente de computación paralela y comunicación entre procesos. Los aceleradores streaming orientados a flujos, igual que en otros procesadores, consisten en diversos componentes micro-arquitectonicos como por ejemplo las estructuras de memoria, las unidades de computo, las unidades de control, los canales de Entrada/Salida y controles de Entrada/Salida, etc. Sin embargo, los requisitos del flujo de datos agregan algunas características especiales e imponen otras restricciones que afectan al rendimiento. Estos dispositivos, por lo general, ofrecen un gran número de recursos computacionales, pero obligan a reorganizar los conjuntos de datos en paralelo, maximizando la independiencia para alimentar los recursos de computación en forma de flujos. La disposición de datos en conjuntos independientes de flujos paralelos no es una tarea sencilla. Es posible que se tenga que cambiar la estructura de un algoritmo en su conjunto o, incluso, puede requerir la reescritura del algoritmo desde cero. Sin embargo, todos estos esfuerzos para la reordenación de los patrones de las aplicaciones de acceso a datos puede que no sean muy útiles para lograr un rendimiento óptimo. Esto es debido a las posibles limitaciones microarquitectonicas de la plataforma de destino para los mecanismos hardware de prefetch, el tamaño y la granularidad del almacenamiento local, y la flexibilidad para disponer de forma serial los datos en el interior del almacenamiento local. Las limitaciones de una plataforma de streaming de proposito general para el prefetching de datos, almacenamiento y demas procedimientos para organizar y mantener los datos en forma de flujos paralelos e independientes podría ser eliminado empleando técnicas a nivel micro-arquitectonico. Esto incluye el uso de memorias personalizadas especificamente para las aplicaciones en el front-end de una arquitectura streaming. El objetivo de esta tesis es presentar exploraciones arquitectónicas de los aceleradores streaming con diseños de memoria personalizados. En general, la tesis cubre tres aspectos principales de tales aceleradores. Estos aspectos se pueden clasificar como: i) Diseño de aceleradores de aplicaciones específicas con diseños de memoria personalizados, ii) diseño de aceleradores con memorias personalizadas basados en plantillas, y iii) exploraciones del espacio de diseño para dispositivos orientados a flujos con las memorias estándar y personalizadas. Esta tesis concluye con la propuesta conceptual de una Blacksmith Streaming Architecture (BSArc). El modelo de computación Blacksmith permite la adopción a nivel de hardware de un front-end de aplicación específico utilizando una GPU como back-end. Esto permite maximizar la explotación de la localidad de datos y el paralelismo a nivel de datos de una aplicación mientras que proporciona un flujo mayor de datos al back-end. Consideramos que el diseño de estos procesadores con memorias especializadas debe ser proporcionado por expertos del dominio de aplicación en la forma de plantillas.The basic concept behind the architecture of a general purpose CPU core conforms well to a serial programming model. The integration of more cores on a single chip helped CPUs in running parts of a program in parallel. However, the utilization of huge parallelism available from many high performance applications and the corresponding data is hard to achieve from these general purpose multi-cores. Streaming accelerators and the corresponding programing models improve upon this situation by providing throughput oriented architectures. The basic idea behind the design of these architectures matches the everyday increasing requirements of processing huge data sets. These high-performance throughput oriented devices help in high performance processing of data by using efficient parallel computations and streaming based communications. The throughput oriented streaming accelerators ¿ similar to the other processors ¿ consist of numerous types of micro-architectural components including the memory structures, compute units, control units, I/O channels and I/O controls etc. However, the throughput requirements add some special features and impose other restrictions for the performance purposes. These devices, normally, offer a large number of compute resources but restrict the applications to arrange parallel and maximally independent data sets to feed the compute resources in the form of streams. The arrangement of data into independent sets of parallel streams is not an easy and simple task. It may need to change the structure of an algorithm as a whole or even it can require to write a new algorithm from scratch for the target application. However, all these efforts for the re-arrangement of application data access patterns may still not be very helpful to achieve the optimal performance. This is because of the possible micro-architectural constraints of the target platform for the hardware pre-fetching mechanisms, the size and the granularity of the local storage and the flexibility in data marshaling inside the local storage. The constraints of a general purpose streaming platform on the data pre-fetching, storing and maneuvering to arrange and maintain it in the form of parallel and independent streams could be removed by employing micro-architectural level design approaches. This includes the usage of application specific customized memories in the front-end of a streaming architecture. The focus of this thesis is to present architectural explorations for the streaming accelerators using customized memory layouts. In general the thesis covers three main aspects of such streaming accelerators in this research. These aspects can be categorized as : i) Design of Application Specific Accelerators with Customized Memory Layout ii) Template Based Design Support for Customized Memory Accelerators and iii) Design Space Explorations for Throughput Oriented Devices with Standard and Customized Memories. This thesis concludes with a conceptual proposal on a Blacksmith Streaming Architecture (BSArc). The Blacksmith Computing allow the hardware-level adoption of an application specific front-end with a GPU like streaming back-end. This gives an opportunity to exploit maximum possible data locality and the data level parallelism from an application while providing a throughput natured powerful back-end. We consider that the design of these specialized memory layouts for the front-end of the device are provided by the application domain experts in the form of templates. These templates are adjustable according to a device and the problem size at the device's configuration time. The physical availability of such an architecture may still take time. However, simulation framework helps in architectural explorations to give insight into the proposal and predicts potential performance benefits for such an architecture

Energy-Efficient Computing for Mobile Signal Processing

Mobile devices have rapidly proliferated, and deployment of handheld devices continues to increase at a spectacular rate. As today's devices not only support advanced signal processing of wireless communication data but also provide rich sets of applications, contemporary mobile computing requires both demanding computation and efficiency. Most mobile processors combine general-purpose processors, digital signal processors, and hardwired application-specific integrated circuits to satisfy their high-performance and low-power requirements. However, such a heterogeneous platform is inefficient in area, power and programmability. Improving the efficiency of programmable mobile systems is a critical challenge and an active area of computer systems research. SIMD (single instruction multiple data) architectures are very effective for data-level-parallelism intense algorithms in mobile signal processing. However, new characteristics of advanced wireless/multimedia algorithms require architectural re-evaluation to achieve better energy efficiency. Therefore, fourth generation wireless protocol and high definition mobile video algorithms are analyzed to enhance a wide-SIMD architecture. The key enhancements include 1) programmable crossbar to support complex data alignment, 2) SIMD partitioning to support fine-grain SIMD computation, and 3) fused operation to support accelerating frequently used instruction pairs. Near-threshold computation has been attractive in low-power architecture research because it balances performance and power. To further improve energy efficiency in mobile computing, near-threshold computation is applied to a wide SIMD architecture. This proposed near-threshold wide SIMD architecture-Diet SODA-presents interesting architectural design decisions such as 1) very wide SIMD datapath to compensate for degraded performance induced by near-threshold computation and 2) scatter-gather data prefetcher to exploit large latency gap between memory and the SIMD datapath. Although near-threshold computation provides excellent energy efficiency, it suffers from increased delay variations. A systematic study of delay variations in near-threshold computing is performed and simple techniques-structural duplication and voltage/frequency margining-are explored to tolerate and mitigate the delay variations in near-threshold wide SIMD architectures. This dissertation analyzes representative wireless/multimedia mobile signal processing algorithms, proposes an energy-efficient programmable platform, and evaluates performance and power. A main theme of this dissertation is that the performance and efficiency of programmable embedded systems can be significantly improved with a combination of parallel SIMD and near-threshold computations.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/86356/1/swseo_1.pd

Architectural explorations for streaming accelerators with customized memory layouts

El concepto básico de la arquitectura mono-nucleo en los procesadores de propósito general se ajusta bien a un modelo de programación secuencial. La integración de multiples núcleos en un solo chip ha permitido a los procesadores correr partes del programa en paralelo. Sin embargo, la explotación del enorme paralelismo disponible en muchas aplicaciones de alto rendimiento y de los datos correspondientes es difícil de conseguir usando unicamente multicores de propósito general. La aparición de aceleradores tipo streaming y de los correspondientes modelos de programación han mejorado esta situación proporcionando arquitecturas orientadas al proceso de flujos de datos. La idea básica detrás del diseño de estas arquitecturas responde a la necesidad de procesar conjuntos enormes de datos. Estos dispositivos de alto rendimiento orientados a flujos permiten el procesamiento rapido de datos mediante el uso eficiente de computación paralela y comunicación entre procesos. Los aceleradores streaming orientados a flujos, igual que en otros procesadores, consisten en diversos componentes micro-arquitectonicos como por ejemplo las estructuras de memoria, las unidades de computo, las unidades de control, los canales de Entrada/Salida y controles de Entrada/Salida, etc. Sin embargo, los requisitos del flujo de datos agregan algunas características especiales e imponen otras restricciones que afectan al rendimiento. Estos dispositivos, por lo general, ofrecen un gran número de recursos computacionales, pero obligan a reorganizar los conjuntos de datos en paralelo, maximizando la independiencia para alimentar los recursos de computación en forma de flujos. La disposición de datos en conjuntos independientes de flujos paralelos no es una tarea sencilla. Es posible que se tenga que cambiar la estructura de un algoritmo en su conjunto o, incluso, puede requerir la reescritura del algoritmo desde cero. Sin embargo, todos estos esfuerzos para la reordenación de los patrones de las aplicaciones de acceso a datos puede que no sean muy útiles para lograr un rendimiento óptimo. Esto es debido a las posibles limitaciones microarquitectonicas de la plataforma de destino para los mecanismos hardware de prefetch, el tamaño y la granularidad del almacenamiento local, y la flexibilidad para disponer de forma serial los datos en el interior del almacenamiento local. Las limitaciones de una plataforma de streaming de proposito general para el prefetching de datos, almacenamiento y demas procedimientos para organizar y mantener los datos en forma de flujos paralelos e independientes podría ser eliminado empleando técnicas a nivel micro-arquitectonico. Esto incluye el uso de memorias personalizadas especificamente para las aplicaciones en el front-end de una arquitectura streaming. El objetivo de esta tesis es presentar exploraciones arquitectónicas de los aceleradores streaming con diseños de memoria personalizados. En general, la tesis cubre tres aspectos principales de tales aceleradores. Estos aspectos se pueden clasificar como: i) Diseño de aceleradores de aplicaciones específicas con diseños de memoria personalizados, ii) diseño de aceleradores con memorias personalizadas basados en plantillas, y iii) exploraciones del espacio de diseño para dispositivos orientados a flujos con las memorias estándar y personalizadas. Esta tesis concluye con la propuesta conceptual de una Blacksmith Streaming Architecture (BSArc). El modelo de computación Blacksmith permite la adopción a nivel de hardware de un front-end de aplicación específico utilizando una GPU como back-end. Esto permite maximizar la explotación de la localidad de datos y el paralelismo a nivel de datos de una aplicación mientras que proporciona un flujo mayor de datos al back-end. Consideramos que el diseño de estos procesadores con memorias especializadas debe ser proporcionado por expertos del dominio de aplicación en la forma de plantillas.The basic concept behind the architecture of a general purpose CPU core conforms well to a serial programming model. The integration of more cores on a single chip helped CPUs in running parts of a program in parallel. However, the utilization of huge parallelism available from many high performance applications and the corresponding data is hard to achieve from these general purpose multi-cores. Streaming accelerators and the corresponding programing models improve upon this situation by providing throughput oriented architectures. The basic idea behind the design of these architectures matches the everyday increasing requirements of processing huge data sets. These high-performance throughput oriented devices help in high performance processing of data by using efficient parallel computations and streaming based communications. The throughput oriented streaming accelerators ¿ similar to the other processors ¿ consist of numerous types of micro-architectural components including the memory structures, compute units, control units, I/O channels and I/O controls etc. However, the throughput requirements add some special features and impose other restrictions for the performance purposes. These devices, normally, offer a large number of compute resources but restrict the applications to arrange parallel and maximally independent data sets to feed the compute resources in the form of streams. The arrangement of data into independent sets of parallel streams is not an easy and simple task. It may need to change the structure of an algorithm as a whole or even it can require to write a new algorithm from scratch for the target application. However, all these efforts for the re-arrangement of application data access patterns may still not be very helpful to achieve the optimal performance. This is because of the possible micro-architectural constraints of the target platform for the hardware pre-fetching mechanisms, the size and the granularity of the local storage and the flexibility in data marshaling inside the local storage. The constraints of a general purpose streaming platform on the data pre-fetching, storing and maneuvering to arrange and maintain it in the form of parallel and independent streams could be removed by employing micro-architectural level design approaches. This includes the usage of application specific customized memories in the front-end of a streaming architecture. The focus of this thesis is to present architectural explorations for the streaming accelerators using customized memory layouts. In general the thesis covers three main aspects of such streaming accelerators in this research. These aspects can be categorized as : i) Design of Application Specific Accelerators with Customized Memory Layout ii) Template Based Design Support for Customized Memory Accelerators and iii) Design Space Explorations for Throughput Oriented Devices with Standard and Customized Memories. This thesis concludes with a conceptual proposal on a Blacksmith Streaming Architecture (BSArc). The Blacksmith Computing allow the hardware-level adoption of an application specific front-end with a GPU like streaming back-end. This gives an opportunity to exploit maximum possible data locality and the data level parallelism from an application while providing a throughput natured powerful back-end. We consider that the design of these specialized memory layouts for the front-end of the device are provided by the application domain experts in the form of templates. These templates are adjustable according to a device and the problem size at the device's configuration time. The physical availability of such an architecture may still take time. However, simulation framework helps in architectural explorations to give insight into the proposal and predicts potential performance benefits for such an architecture.Postprint (published version