Pre-validation of SoC via hardware and software co-simulation

Abstract. System-on-chips (SoCs) are complex entities consisting of multiple hardware and software components. This complexity presents challenges in their design, verification, and validation. Traditional verification processes often test hardware models in isolation until late in the development cycle. As a result, cooperation between hardware and software development is also limited, slowing down bug detection and fixing. This thesis aims to develop, implement, and evaluate a co-simulation-based pre-validation methodology to address these challenges. The approach allows for the early integration of hardware and software, serving as a natural intermediate step between traditional hardware model verification and full system validation. The co-simulation employs a QEMU CPU emulator linked to a register-transfer level (RTL) hardware model. This setup enables the execution of software components, such as device drivers, on the target instruction set architecture (ISA) alongside cycle-accurate RTL hardware models. The thesis focuses on two primary applications of co-simulation. Firstly, it allows software unit tests to be run in conjunction with hardware models, facilitating early communication between device drivers, low-level software, and hardware components. Secondly, it offers an environment for using software in functional hardware verification. A significant advantage of this approach is the early detection of integration errors. Software unit tests can be executed at the IP block level with actual hardware models, a task previously only possible with costly system-level prototypes. This enables earlier collaboration between software and hardware development teams and smoothens the transition to traditional system-level validation techniques.Järjestelmäpiirin esivalidointi laitteiston ja ohjelmiston yhteissimulaatiolla. Tiivistelmä. Järjestelmäpiirit (SoC) ovat monimutkaisia kokonaisuuksia, jotka koostuvat useista laitteisto- ja ohjelmistokomponenteista. Tämä monimutkaisuus asettaa haasteita niiden suunnittelulle, varmennukselle ja validoinnille. Perinteiset varmennusprosessit testaavat usein laitteistomalleja eristyksissä kehityssyklin loppuvaiheeseen saakka. Tämän myötä myös yhteistyö laitteisto- ja ohjelmistokehityksen välillä on vähäistä, mikä hidastaa virheiden tunnistamista ja korjausta. Tämän diplomityön tavoitteena on kehittää, toteuttaa ja arvioida laitteisto-ohjelmisto-yhteissimulointiin perustuva esivalidointimenetelmä näiden haasteiden ratkaisemiseksi. Menetelmä mahdollistaa laitteiston ja ohjelmiston varhaisen integroinnin, toimien luonnollisena välietappina perinteisen laitteistomallin varmennuksen ja koko järjestelmän validoinnin välillä. Yhteissimulointi käyttää QEMU suoritinemulaattoria, joka on yhdistetty rekisterinsiirtotason (RTL) laitteistomalliin. Tämä mahdollistaa ohjelmistokomponenttien, kuten laiteajureiden, suorittamisen kohdejärjestelmän käskysarja-arkkitehtuurilla (ISA) yhdessä kellosyklitarkkojen RTL laitteistomallien kanssa. Työ keskittyy kahteen yhteissimulaation pääsovellukseen. Ensinnäkin se mahdollistaa ohjelmiston yksikkötestien suorittamisen laitteistomallien kanssa, varmistaen kommunikaation laiteajurien, matalan tason ohjelmiston ja laitteistokomponenttien välillä. Toiseksi se tarjoaa ympäristön ohjelmiston käyttämiseen toiminnallisessa laitteiston varmennuksessa. Merkittävä etu tästä lähestymistavasta on integraatiovirheiden varhainen havaitseminen. Ohjelmiston yksikkötestejä voidaan suorittaa jo IP-lohkon tasolla oikeilla laitteistomalleilla, mikä on aiemmin ollut mahdollista vain kalliilla järjestelmätason prototyypeillä. Tämä mahdollistaa aikaisemman ohjelmisto- ja laitteistokehitystiimien välisen yhteistyön ja helpottaa siirtymistä perinteisiin järjestelmätason validointimenetelmiin

Optimization of DSSS Receivers Using Hardware-in-the-Loop Simulations

Over the years, there has been significant interest in defining a hardware abstraction layer to facilitate code reuse in software defined radio (SDR) applications. Designers are looking for a way to enable application software to specify a waveform, configure the platform, and control digital signal processing (DSP) functions in a hardware platform in a way that insulates it from the details of realization. This thesis presents a tool-based methodolgy for developing and optimizing a Direct Sequence Spread Spectrum (DSSS) transceiver deployed in custom hardware like Field Programmble Gate Arrays (FPGAs). The system model consists of a tranmitter which employs a quadrature phase shift keying (QPSK) modulation scheme, an additive white Gaussian noise (AWGN) channel, and a receiver whose main parts consist of an analog-to-digital converter (ADC), digital down converter (DDC), image rejection low-pass filter (LPF), carrier phase locked loop (PLL), tracking locked loop, down-sampler, spread spectrum correlators, and rectangular-to-polar converter. The design methodology is based on a new programming model for FPGAs developed in the industry by Xilinx Inc. The Xilinx System Generator for DSP software tool provides design portability and streamlines system development by enabling engineers to create and validate a system model in Xilinx FPGAs. By providing hierarchical modeling and automatic HDL code generation for programmable devices, designs can be easily verified through hardware-in-the-loop (HIL) simulations. HIL provides a significant increase in simulation speed which allows optimization of the receiver design with respect to the datapath size for different functional parts of the receiver. The parameterized datapath points used in the simulation are ADC resolution, DDC datapath size, LPF datapath size, correlator height, correlator datapath size, and rectangular-to-polar datapath size. These parameters are changed in the software enviornment and tested for bit error rate (BER) performance through real-time hardware simualtions. The final result presents a system design with minimum harware area occupancy relative to an acceptable BER degradation

The review of heterogeneous design frameworks/Platforms for digital systems embedded in FPGAs and SoCs

Systems-on-a-chip integrate specialized modules to provide well-defined functionality. In order to guarantee its efficiency, designersare careful to choose high-level electronic components. In particular,FPGAs (field-programmable gate array) have demonstrated theirability to meet the requirements of emerging technology. However,traditional design methods cannot keep up with the speed andefficiency imposed by the embedded systems industry, so severalframeworks have been developed to simplify the design process of anelectronic system, from its modeling to its physical implementation.This paper illustrates some of them and presents a comparative studybetween them. Indeed, we have selected design methods of SoC(ESP4ML and HLS4ML, OpenESP, LiteX, RubyRTL, PyMTL,SysPy, PyRTL, DSSoC) and NoC networks on OCN chip (PyOCN)and in general on FPGA (PRGA, OpenFPGA, AnyHLS, PYNQ, andPyLog).The objective of this article is to analyze each tool at several levelsand to discuss the benefit of each in the scientific community. Wewill analyze several aspects constituting the architecture and thestructure of the platforms to make a comparative study of thehardware and software design flows of digital systems.

Media Independent Interface (MII) implementation and data processing on FPGA for Fast ETHERNET transmission over Plastic Optical Fiber

Proyecto de Graduación (Licenciatura en Ingeniería Electrónica) Instituto Tecnológico de Costa Rica. Escuela de Ingeniería Electrónica, 2008This thesis focuses on the design and implementation of a Media Converter, which allows Ethernet Communication through 250 meters of Plastic Optical Fiber (POF). Three subsystems constitute this system. First, a configurable MII Interface which provides Full Duplex Communication through the Ethernet at different data rates (10Mpbs and 100Mbps). The User defines the data rate according to the capabilities of his Modulator. The second subsystem is the Transmission Module. This module receives Ethernet data provided by the MII interface in order to encode it. Then it generates a Reed Solomon verifying sequence used by the receiver to correct the frame errors and to certificate the frame accuracy. Finally, the third subsystem is a Testing Unit. It is used in the development and debugging process of the prototype. This module emulates a real data transmission using a Pseudo Random Bit sequence (PRBS). The data received is stored and then downloaded by a block called Downloading Unit that executes Direct Memory Access (DMA) transfers between the memory of the Testing Unit and a computer. The transfers are made through the USB port of the PC.Instituto Tecnológico de Costa Rica. Escuela de Ingeniería Electrónica

A Test Vector Minimization Algorithm Based On Delta Debugging For Post-Silicon Validation Of Pcie Rootport

In silicon hardware design, such as designing PCIe devices, design verification is an essential part of the design process, whereby the devices are subjected to a series of tests that verify the functionality. However, manual debugging is still widely used in post-silicon validation and is a major bottleneck in the validation process. The reason is a large number of tests vectors have to be analyzed, and this slows process down. To solve the problem, a test vector minimizer algorithm is proposed to eliminate redundant test vectors that do not contribute to reproduction of a test failure, hence, improving the debug throughput. The proposed methodology is inspired by the Delta Debugging algorithm which is has been used in automated software debugging but not in post-silicon hardware debugging. The minimizer operates on the principle of binary partitioning of the test vectors, and iteratively testing each subset (or complement of set) on a post-silicon System-Under-Test (SUT), to identify and eliminate redundant test vectors. Test results using test vector sets containing deliberately introduced erroneous test vectors show that the minimizer is able to isolate the erroneous test vectors. In test cases containing up to 10,000 test vectors, the minimizer requires about 16ns per test vector in the test case when only one erroneous test vector is present. In a test case with 1000 vectors including erroneous vectors, the same minimizer requires about 140μs per erroneous test vector that is injected. Thus, the minimizer’s CPU consumption is significantly smaller than the typical amount of time of a test running on SUT. The factors that significantly impact the performance of the algorithm are number of erroneous test vectors and distribution (spacing) of the erroneous vectors. The effect of total number of test vectors and position of the erroneous vectors are relatively minor compared to the other two. The minimization algorithm therefore was most effective for cases where there are only a few erroneous test vectors, with large number of test vectors in the set

A generic debug interface for IP-integrated assertions

Der Entwurf von Hardware/Software Systemen ist auf eine solide Verifikationsmethodik angewiesen, die den ganzen Design Flow durchzieht. Viele Konzepte haben eine Erhöhung des Abstraktionsniveaus bei der Entwurfseingabe gemeinsam, wobei der modell-basierte Hardware-Entwurf einen vielversprechenden und sich verbreitenenden Ansatz darstellt. Assertion basierte Verifikation ermöglicht dem Entwickler die Spezifikation von Eigenschaften des Entwurfes und die Aufdeckung von Fällen, in denen diese verletzt werden. Während Assertions in Entwurfs- und Simulationsstadien weit verbreitet sind, ist der Ansatz, diese mit auf dem integrierten Schaltkreis (IC) zu fertigen, neuartig. In dieser Diplomarbeit soll ein von Infineon Technologies entwickeltes, auf UML basierendes Datenmodell, welches zur Erfassung von Entwurfsspezifikation und zur automatischen Code-Generierung genutzt wird dahingehend erweitert werden, die Beschreibung für im IC integrierte Assertions zu ermöglichen. Für diese Zwecke wird ein abstraktes Datenmodell beschrieben werden. Das Assertion Interface soll die spezifikationsgetreue Modellintegration gewährleisten, sowie IC interne Assertionresultate dem umgebenen System über das Interface zugänglich machen und damit zum Debugging während der Laufzeit ermöglichen. Ferner werden die Codegenerierungs Templates erläutert und einBeispielsystem eingeführt, um die beschriebenden Konzepte zu validieren.Nowadays electronic systems design requires fast time to market and solid verification throughout the entire design flow. Many concepts have been researched to raise the level of abstraction during the design entry phase, whereas model-based design is the most promising one. Assertion-based verification enables the developer to specify properties of the design and to get report if these are violated. Assertions are common during development and simulation of electronic products but often are not included in the final silicon. In this thesis an UML-based model defined at Infineon Technologies for capturing design specification information and to generate code automatically using templates, will be extended to allow the description of an abstract debuggable assertion interface for silicon assertions. With help of the assertion interface it shall be possible to verify the correct module integration and to monitor IP-internal assertion checker results. Besides, the code-generation templates for the assertion interface model will be described. To demonstrate the usability of the developed concepts an example system will be introduced to validate the approach.Ilmenau, Techn. Univ., Diplomarbeit, 200

A Problem-Oriented Approach for Dynamic Verification of Heterogeneous Embedded Systems

This work presents a virtual prototyping methodology for the design and verification of industrial devices in the field level of industrial automation systems. This work demonstrates that virtual prototypes can help increase the confidence in the correctness of a design thanks to a deeper understanding of the complex interactions between hardware, software, analog and mixed-signal components of embedded systems and the physical processes they interact with