Investigation of the piezoelectric charge coefficient d33 of thick-film piezoelectric ceramics by varying poling and repoling conditions

Piezoelectric ceramics are commonly used in various sensing applications. In this paper, the effect of poling and repoling conditions on thick-film piezoelectric ceramics were investigated. The piezoelectric charge coefficient of the piezoelectric ceramics were measured with varying poling conditions, where the effect of changing poling temperature and electrical field on the d33 were analyzed. This was followed by investigating on the effect high applied electrical fields results in repolarization the alignment of the piezoelectric domain in the opposite direction. The temperature and electrical field dependence polarization of the thick-film piezoelectric ceramics were varied near to its Curie temperature between 50oC to 250oC and at a range of electrical field from 20 V (400 kV/mm) up to 200 V (4 MV/mm). It was found that the piezoelectric properties increases with increasing the poling electric field and poling temperature significantly. The maximum values of piezoelectric coefficient were obtained for the piezoelectric ceramics poled at the Curie temperature with high electric fields for 15 min. The aging behavior of the piezoelectric ceramics shows that piezoelectric charge coefficient d33 depends on the poling and repoling conditions

Origin of Piezoelectricity in Piezoelectric Ceramics from the Viewpoints of Elastic Constants Measured by Acoustic Wave Velocities

This chapter consists of two parts; the first part describes “how can high piezoelectricity be realized from measuring acoustic wave velocities?” That is, the measurement of sound velocities resulted in an effective tool for researching and developing piezoelectric materials, and, furthermore, it was possible to design the material compositions of lead-free piezoelectric ceramics as well as lead-containing ceramics. The second part describes the “effects of firing and DC poling treatments on elastic constants measured from acoustic wave velocities in barium titanate piezoelectric ceramics”. Namely, it could be applied to manufacturing processes such as firing and DC poling treatments in piezoelectric ceramics, which is accompanied with densification of ceramics and ferroelectric domain aligment, respectively. It is clarified through the two parts that the evaluation of elastic constants leads to the origin of piezoelectricity in piezoelectric ceramics

Ferroelectric properties of Bi0.5(Na0.8K0.2)0.5TiO3 ceramics

Different processing conditions and the effect of secondary phases on ferroelectric properties of Bi0.5(Na0.8K0.2)0.5TiO3 (BNKT) are studied. Ceramic powders are prepared by solid state reaction and different sintering temperatures (temperatures between 1075 and 1150ºC) are analyzed. Finally, samples are characterized by X-ray diffraction, Raman microspectroscopy, Scanning Electron Microscopy, impedance spectroscopy, and density measurements. Through XRD patterns, the perovskite structure is stabilized; together with small peaks corresponding to a secondary phase associated with K2-xNaxTi6O13 phase. Moreover, the content of the secondary phase, d33 piezoelectric constant and dielectric properties increase with sintering temperature.Fil: Camargo, Javier Eduardo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Ramajo, Leandro Alfredo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Rubio Marcos, Fernando. Instituto de Ceramica y Vidrio de Madrid; EspañaFil: Castro, Miriam Susana. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentin

FABRICATION AND MECHANICAL PROPERTIES OF Na0.5Bi0.5TiO3–BaTiO3 LEAD-FREE PIEZOELECTRIC CERAMICS

Piezoelectric ceramics with 0.94Na0.5Bi0.5TO3–0.06BaTiO3 compositions were fabricated by solid state mixed oxide method and sintered at different temperatures varying from 1050°C to 1150°C to obtain dense ceramics. Phase analysis using X-ray diffraction showed tetragonal perovskite structure of Na0.5Bi0.5TO3 with no BaTiO3 peak detected. The SEM observation revealed that the crystal grain size of the piezoelectric ceramics is on the nano-size dimensions under all the sintering temperature. The study on the compressive mechanical characteristics showed that the compressive strength of the 0.94Na0.5Bi0.5TO3–0.06BaTiO3 piezoelectric ceramics increases with the rise of sintering temperature and sintering time. The change behavior of the compressive strength with the rise of cold pressure presents increasing firstly and then decreases

Hydrodynamic squeeze-film bearings for gyroscopes

Experimental tests are conducted on squeeze-film bearings by applying electricity to piezoelectric ceramics, causing vibrations at thousands or millions of Hz that are amplified and transmitted to the bearing. Rotor operation through 24,000 rpm without whirl instability proved bearing ability to support rotor weight without hydrodynamic action

Improving the functional properties of (K0.5Na0.5)NbO3 piezoceramics by acceptor doping

ZrO2 and TiO2 modified lead-free (K0.5Na0.5)NbO3 (KNN) piezoelectric ceramics are prepared by a conventional solid-state reaction. The effect of acceptor doping on structural and functional properties is investigated. A decrease in the Curie temperature and an increase in the dielectric constant values are observed when doping. More interestingly, an increase in the coercive field E-c and remanent polarization P-r is observed. The piezoelectric properties are greatly increased when doping with small concentrations dopants. ZrO2 doped ceramic exhibits good piezoelectric properties with piezoelectric coefficient d(33) = 134 pC/N and electromechanical coupling factor k(p) = 35%. It is verified that nonlinearity is significantly reduced. Thus, the creation of complex defects capable of pinning the domain wall motion is enhanced with doping, probably due to the formation of oxygen vacancies. These results strongly suggest that compositional engineering using low concentrations of acceptor doping is a good means of improving the functional properties of KNN lead-free piezoceramic system. (C) 2014 Elsevier Ltd. All rights reserved.Postprint (published version

Elastic, dielectric and electromechanical properties of (Bi0.5Na0.5)TiO3-BaTiO3 piezoceramics at the morphotropic phase boundary region

A systematic study of the functional properties of the (1-x)(Bi0.5Na0.5)TiO3–xBaTiO3 (BNT-xBT) piezoceramic system for 0.05 = x = 0.07 is performed. The samples are obtained through the conventional solid-state route. The expected microstructure for these compounds, with no significant dependence on the composition, is verified by field-emission scanning electron microscopy. The morphotropic phase boundary (MPB) is detected for x = 0.06–0.07 by means of the Rietveld analysis of X-ray diffraction data. The dielectric spectra show a frequency-independent, completely diffuse phase transition with a composition-dependent diffusivity coefficient. The depolarization temperature is effectively evaluated from pyroelectric measurements, the value being strongly dependent on the composition. A significant contribution of the extrinsic effect to elastic, dielectric and electromechanical properties is revealed for MPB BNT-xBT. The Bi3+ substitution by Ba2+ leads to the formation of A-site vacancies, which give rise to the enhancement of domain wall motion, as occurs in other perovskite-type piezoelectrics. Good functional properties are achieved for x = 0.07 (d33 = 180 pC/N), which are similar or even better than those obtained by complex synthesis routes. This system exhibits a remarkable stability in the permittivity that has hitherto not been reported. This fact may open the way for BNT-BT compositions to be used in specific applications in which lead-free piezoceramics have previously been employed with little success, e.g. in high power devices.Postprint (author's final draft

Lead-free piezoceramics - Where to move on?

Lead-free piezoceramics aiming at replacing the market-dominant lead-based ones have been extensively searched for more than a decade worldwide. Some noteworthy outcomes such as the advent of commercial products for certain applications have been reported, but the goal, i.e., the invention of a lead-free piezocermic, the performance of which is equivalent or even superior to that of PZT-based piezoceramics, does not seem to be fulfilled yet. Nevertheless, the academic effort already seems to be culminated, waiting for a guideline to a future research direction. We believe that a driving force for a restoration of this research field needs to be found elsewhere, for example, intimate collaborations with related industries. For this to be effectively realized, it would be helpful for academic side to understand the interests and demands of the industry side as well as to provide the industry with new scientific insights that would eventually lead to new applications. Therefore, this review covers some of the issues that are to be studied further and deeper, so-to-speak, lessons from the history of piezoceramics, and some technical issues that could be useful in better understanding the industry demands. As well, the efforts made in the industry side will be briefly introduced for the academic people to catch up with the recent trends and to be guided for setting up their future research direction effectively.ope