Upgrade of the L2 electronics in the CMS Muon Drift Tubes system

The excellent performance of the DT system during the past years is expected to be pursued at the increased luminosity, so the main motivation driving the DT upgrade is focused on improving the electronic system to maintain its reliability. The fulfillment of this project envisages to turn electrical signals into optical signals for a total number of 3500 optical channels that run at up to 480 Mb/s data rate. A Bit Error Rate (BER) of the order of 10−12 with a confidence level (CL) of 95% has been measured which ensures that an appropriate components choice has been made in view of the full boards production

The optical links for the trigger upgrade of the Drift Tube in CMS

The first phase of the upgrade of the electronics of Drift Tubes (DT) in the CMS experiment is reported. It consists of the translation of the readout and trigger data from electrical into optical and their transmission from the CMS experimental cavern to the counting room. Collecting the full information of the DT chambers in the counting room allows the development of new trigger hardware and algorithms

Usefulness of transesophageal echocardiography in the assessment of aortic dissection

The acute dissection of the ascending aorta requires prompt and reliable diagnosis to reduce the high risk of mortality; in addition, prognosis is influenced by longterm complications. The aim of this article is to discuss transesophageal echocardiography (TEE) and (1) its diagnostic accuracy in the presurgical evaluation of patients, (2) its role in reducing time of diagnosis and surgery, and (3) its ability to reduce hospital mortality. TEE has also been tested as a screening method in the postsurgical follow-up of these patients. The retrospective investigation concerns a sample of 80 cases of acute dissection of the aorta, submitted for surgical intervention from April 1986 to February 1999. TEE has allowed a precise estimation of aortic diameters and optimal visualization of intimal flap and tear entry with a fine distinction between true and false lumen. A direct comparison of the results of TEE and of transthoracic echocardiography has demonstrated that some elements (visualization of flap and diameters in descending aorta, sites of entry and reentry, direction of let trough intimal tears, phasic intimal flap movement, diastolic collapse of flap on the valvular plane, false lumen thrombosis, coronary involvement, intramural hematoma, and aortic fissuration) were identified only by TEE, whereas other additional diagnostic elements (cardiac tamponade, aortic valve insufficiency, left ventricular function) show a similar pattern of significance. Routine employment of this method has confirmed a reduction of hospitalization time (about 1.5 hours of waiting time), and hospital mortality has changed from 42.8% to 17.3%. In the follow-up of patients operated on for aortic dissection, fundamental information may be obtained from TEE (assessment of the progression of thrombosis in the false lumen with its complete obliteration and modifications in aortic diameter with a consequent, possible worsening of aortic valve insufficiency). In conclusion, our study demonstrated that TEE may provide fast and efficient detection of acute aortic dissection. In the postsurgical follow-up, TEE has confirmed detection of major complications that can influence long-term prognosis and may be proposed as a method with easy access-one that is repeatable and inexpensive for the screening of aortic dissection surgical patients. (C) 2000 by Excerpta Medica, Inc

Hybrid pixels for the PANDA Micro-Vertex Detector

PANDA is a fixed target experiment that will be carried out at the future FAIR facility. The PANDA experiment will perform precise studies of antiproton-proton and antiproton-nuclei annihilations, allowing to investigate different physics topics. The Micro-Vertex Detector (MVD), which represents the innermost part of the central tracking system, features good spatial resolution, limited material budget, radiation hardness and PID capability. To cope with this requirements the MVD is composed by pixel and strip detectors. The custom pixel detector design foresees thin epitaxial sensors and a readout electronics developed in 130nm CMOS technology able to work in a triggerless environment. The first single chip assembly prototype for the pixel detector of PANDA is composed of the ToPix3 readout chip and a dedicated epitaxial silicon sensor matching in size the 640 readout channel matrix of the ASIC prototype. The bump bonding connection was done by IZM company. To perform the first beam test, a pixel tracking station composed by 4 planes was assembled and tested with 2.7GeV/c protons at Forschungszentrum J¨ulich. The data analysis is presented

Test and commissioning of the CARLOS control boards for the ALICE Silicon Drift Detectors

This paper presents the test strategy employed during the installation of the CARLOS end ladder boards developed for the Silicon Drift Detectors (SDD) of ALICE. Each CARLOS board compresses the data provided by the front-end electronics of one SDD and sends them via an optical link of 800 Mbit/s to the data concentrator card (CARLOSrx) located in the counting room. The paper describes the integration of the CARLOS boards in the final SDD system, including its cooling and mechanical support, the power supply distribution and the optical interconnections. The results of the tests performed after each step of the installation sequence are reported

Performance of the readout system of the ALICE Zero Degree Calorimeters in LHC Run 3

The ALICE Zero Degree Calorimeters (ZDC) provide information about event geometry in heavy-ion collisions through the detection of spectator nucleons and allow to estimate the delivered luminosity. They are also very useful in p–A collisions, allowing an unbiased estimation of collision centrality. The Run 3 operating conditions will involve a tenfold increase in instantaneous luminosity in heavy-ion collisions, with event rates that, taking into account the different processes, could reach 5 MHz in the ZDCs. The challenges posed by this demanding environment lead to a redesign of the readout system and to the transition to a continuous acquisition. The new system is based on 12 bit, 1 Gsps FMC digitizers that will continuously sample the 26 ZDC channels. Triggering, pedestal estimation and luminosity measurements will be performed on FPGA directly connected to the front-end. The new readout system and the performances foreseen in Run 3 are presented

Design and operation of a fast high-granularity silicon detector system in a high-radiation environment

Abstract We have designed, realized and operated a fast silicon detector system (50 MHz sampling frequency) to measure the angular distribution and the multiplicity of charged secondaries produced in high-energy Pb–Pb interactions, within the NA50 experiment. We present here the detector design, discuss some of the problems faced during the commissioning and report on the first results on the operation of the full system. In particular, the questions related to the operation of an integrated high-speed binary readout in a high-radiation environment (1014 particles/cm2 and about 10 Mrads) and to the radiation effects on the system during the run will be addressed

Combined search for the quarks of a sequential fourth generation

Results are presented from a search for a fourth generation of quarks produced singly or in pairs in a data set corresponding to an integrated luminosity of 5 inverse femtobarns recorded by the CMS experiment at the LHC in 2011. A novel strategy has been developed for a combined search for quarks of the up and down type in decay channels with at least one isolated muon or electron. Limits on the mass of the fourth-generation quarks and the relevant Cabibbo-Kobayashi-Maskawa matrix elements are derived in the context of a simple extension of the standard model with a sequential fourth generation of fermions. The existence of mass-degenerate fourth-generation quarks with masses below 685 GeV is excluded at 95% confidence level for minimal off-diagonal mixing between the third- and the fourth-generation quarks. With a mass difference of 25 GeV between the quark masses, the obtained limit on the masses of the fourth-generation quarks shifts by about +/- 20 GeV. These results significantly reduce the allowed parameter space for a fourth generation of fermions.Comment: Replaced with published version. Added journal reference and DO

Technical Design Report for the PANDA Solenoid and Dipole Spectrometer Magnets

This document is the Technical Design Report covering the two large spectrometer magnets of the PANDA detector set-up. It shows the conceptual design of the magnets and their anticipated performance. It precedes the tender and procurement of the magnets and, hence, is subject to possible modifications arising during this process.Comment: 10 pages, 14MB, accepted by FAIR STI in May 2009, editors: Inti Lehmann (chair), Andrea Bersani, Yuri Lobanov, Jost Luehning, Jerzy Smyrski, Technical Coordiantor: Lars Schmitt, Bernd Lewandowski (deputy), Spokespersons: Ulrich Wiedner, Paola Gianotti (deputy

Search for supersymmetry in events with b-quark jets and missing transverse energy in pp collisions at 7 TeV

Results are presented from a search for physics beyond the standard model based on events with large missing transverse energy, at least three jets, and at least one, two, or three b-quark jets. The study is performed using a sample of proton-proton collision data collected at sqrt(s) = 7 TeV with the CMS detector at the LHC in 2011. The integrated luminosity of the sample is 4.98 inverse femtobarns. The observed number of events is found to be consistent with the standard model expectation, which is evaluated using control samples in the data. The results are used to constrain cross sections for the production of supersymmetric particles decaying to b-quark-enriched final states in the context of simplified model spectra.Comment: Submitted to Physical Review