Incorporation of Indium Tin Oxide Nanoparticles in PEMFC Electrodes

Carbon materials suffer from corrosion at the cathode of polymer electrolyte membrane fuel cells (PEMFCs). In the presence of water, carbon support materials are oxidized to carbon dioxide even at low potentials. Hence, nowadays it is very fashionable to look for alternative support materials, like oxides or conductive polymers. To gain the maximum performance for a new material one should also consider an appropriate electrode structure. This study shows the results for the incorporation of nanosized alternative support materials into advanced electrode architectures. Commercially available indium tin oxide (ITO) nanoparticles (<50 nm) are used as support for Pt nanoparticles in combination with Nafion‐coated multi‐walled carbon nanotubes (MWCNTs) on the cathode side of a PEMFC. The MWCNTs promote a high electronic conductivity and help to form a porous network, which could accommodate the Pt/ITO nanoparticles. The microscopic investigations show a homogeneous electrode structure composed of Pt/ITO and MWCNT/Nafion multilayer. Single cell measurements show a maximum power density of 73 mW cm −2 and a Pt utilization of 1468 mW mg Pt −1 for the cathode. The performance data and the Pt utilization are comparable to a standard Pt/carbon black electrode possessing the same Pt loading in the electrode. Beside this, it is shown for the first time that ITO serves as support material under real fuel cell conditions. Oxide support materials decorated with Pt nanoparticles are embedded in a carbon nanotube network by a multilayer preparation technique. The corrosion‐stable support in combination with the porous structure offered by the CNTs leads to a high Pt utilization and a good electrochemical performance. Further optimization of the structure could result in stable, cost efficient, and easy to prepare electrodes.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/92002/1/569_ftp.pd

Ultrathin Stable Ohmic Contacts for High-Temperature Operation of β\beta-Ga2_2O3_3 Devices

Beta gallium oxide ($\beta$-Ga$_2$O$_3$) shows significant promise in the high-temperature, high-power, and sensing electronics applications. However, long-term stable metallization layers for Ohmic contacts at high temperature present unique thermodynamic challenges. The current most common Ohmic contact design based on 20 nm of Ti has been repeatedly demonstrated to fail at even moderately elevated temperatures (300-400$^{\circ}$C) due to a combination of non-stoichiometric Ti/Ga$_2$O$_3$ interfacial reactions and kinetically favored Ti diffusion processes. Here we demonstrate stable Ohmic contacts for Ga$_2$O$_3$ devices operating up to 500-600$^{\circ}$C using ultrathin Ti layers with a self-limiting interfacial reaction. The ultrathin Ti layer in the 5nm Ti / 100nm Au contact stack is designed to fully oxidize while forming an Ohmic contact, thereby limiting both thermodynamic and kinetic instability. This novel contact design strategy results in an epitaxial conductive anatase titanium oxide interface layer that enables low-resistance Ohmic contacts that are stable both under long-term continuous operation (>500 hours) at 600$^{\circ}$C in vacuum ($\leq$ 10$^{-4}$ Torr), as well as after repeated thermal cycling (15 times) between room temperature and 550$^{\circ}$C in flowing N$_2$. This stable Ohmic contact design will accelerate the development of high-temperature devices by enabling research focus to shift towards rectifying contacts and other interfacial layers.Comment: 25 Pages, 7 Figure

Elucidating the CXCL12/CXCR4 Signaling Network in Chronic Lymphocytic Leukemia through Phosphoproteomics Analysis

, and is thought to be due to enhanced survival signaling responses to environmental factors that protect CLL cells from spontaneous and chemotherapy-induced death. Although normally associated with cell migration, the chemokine, CXCL12, is one of the factors known to support the survival of CLL cells. Thus, the signaling pathways activated by CXCL12 and its receptor, CXCR4, were investigated as components of these pathways and may represent targets that if inhibited, could render resistant CLL cells more susceptible to chemotherapy.To determine the downstream signaling targets that contribute to the survival effects of CXCL12 in CLL, we took a phosphoproteomics approach to identify and compare phosphopeptides in unstimulated and CXCL12-stimulated primary CLL cells. While some of the survival pathways activated by CXCL12 in CLL are known, including Akt and ERK1/2, this approach enabled the identification of additional signaling targets and novel phosphoproteins that could have implications in CLL disease and therapy. In addition to the phosphoproteomics results, we provide evidence from western blot validation that the tumor suppressor, programmed cell death factor 4 (PDCD4), is a previously unidentified phosphorylation target of CXCL12 signaling in all CLL cells probed. Additionally, heat shock protein 27 (HSP27), which mediates anti-apoptotic signaling and has previously been linked to chemotherapeutic resistance, was detected in a subset (∼25%) of CLL patients cells examined.Since PDCD4 and HSP27 have previously been associated with cancer and regulation of cell growth and apoptosis, these proteins may have novel implications in CLL cell survival and represent potential therapeutic targets. PDCD4 also represents a previously unknown signaling target of chemokine receptors; therefore, these observations increase our understanding of alternative pathways to migration that may be activated or inhibited by chemokines in the context of cancer cell survival

Book reviews

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/48161/1/267_2005_Article_BF01866106.pd

Genome editing provides new insights into receptor-controlled signalling pathways

Rapid developments in genome editing, based largely on CRISPR/Cas9 technologies, are offering unprecedented opportunities to eliminate the expression of single or multiple gene products in intact organisms and in model cell systems. Elimination of individual G protein-coupled receptors (GPCRs), both single and multiple G protein subunits, and arrestin adaptor proteins is providing new and sometimes unanticipated insights into molecular details of the regulation of cell signalling pathways and the behaviour of receptor ligands. Genome editing is certain to become a central component of therapeutic target validation, and will provide pharmacologists with new understanding of the complexities of action of novel and previously studied ligands, as well as of the transmission of signals from individual cell-surface receptors to intracellular signalling cascades

Dasatinib inhibits CXCR4 signaling in chronic lymphocytic leukaemia cells and impairs migration towards CXCL12

Chemokines and their ligands play a critical role in enabling chronic lymphocytic leukaemia (CLL) cells access to protective microenvironmental niches within tissues, ultimately resulting in chemoresistance and relapse: disruption of these signaling pathways has become a novel therapeutic approach in CLL. The tyrosine kinase inhibitor dasatinib inhibits migration of several cell lines from solid-organ tumours, but effects on CLL cells have not been reported. We studied the effect of clinically achievable concentrations of dasatinib on signaling induced by the chemokine CXCL12 through its' receptor CXCR4, which is highly expressed on CLL cells. Dasatinib pre-treatment inhibited Akt and ERK phosphorylation in CLL cells upon stimulation with CXCL12. Dasatinib also significantly diminished the rapid increase in actin polymerisation observed in CLL cells following CXCL12 stimulation. Moreover, the drug significantly inhibited chemotaxis in a transwell assay, and reduced the percentage of cells able to migrate beneath a CXCL12-expressing murine stromal cell line. Dasatinib also abrogated the anti-apoptotic effect of prolonged CXCL12 stimulation on cultured CLL cells. These data suggest that dasatinib, akin to other small molecule kinase inhibitors targeting the B-cell receptor signaling pathway, may redistribute CLL cells from protective tissue niches to the peripheral blood, and support the investigation of dasatinib in combination strategies

Component-based modeling of PEM fuel cells with bond graphs

A polymer electrolyte membrane (PEM) fuel cell is a power generation device that transforms chemical energy contained within hydrogen and oxygen gases into useful electricity. The performance of a PEMFC unit is governed by three interdependent physical phenomena: heat, mass, and charge transfer. When modelling such a multi-physical system it is advantageous to use an approach capable of representing all the processes in a unified fashion. This paper presents a component-based model of PEMFCs developed using the bond graph (BG) technique in Modelica language. The basics of the BG method are outlined and a number of relevant publications are reviewed. Model assumptions and necessary equations for each fuel cell component are outlined. The overall model is constructed from a set of bond-graphic blocks within thermal, pneumatic and electrical domains. The model output was compared with the experimental data gathered from a two-cell stack and demonstrated a good accuracy in predicting system behaviour. In the future the designed model will be used for fuel cell reliability studies

Complementary actions of dopamine D2 receptor 1 agonist and anti-Vegf therapy on tumoral vessel normalization in a transgenic mouse model

International audienceAngiogenesis contributes in multiple ways to disease progression in tumors and reduces treatment efficiency. Molecular therapies targeting Vegf signaling combined with chemotherapy or other drugs exhibit promising results to improve efficacy of treatment. Dopamine has been recently proposed to be a novel safe anti-angiogenic drug that stabilizes abnormal blood vessels and increases therapeutic efficacy. Here, we aimed to identify a treatment to normalize tumoral vessels and restore normal blood perfusion in tumor tissue with a Vegf receptor inhibitor and/or a ligand of dopamine G protein-coupled receptor D2 (D2R). Dopamine, via its action on D2R, is an endogenous effector of the pituitary gland, and we took advantage of this system to address this question. We have used a previously described Hmga2/T mouse model developing haemorrhagic prolactin-secreting adenomas. In mutant mice, blood vessels are profoundly altered in tumors, and an aberrant arterial vascularization develops leading to the loss of dopamine supply. D2R agonist treatment blocks tumor growth, induces regression of the aberrant blood supply and normalizes blood vessels. A chronic treatment is able to restore the altered balance between pro- and anti-angiogenic factors. Remarkably, an acute treatment induces an upregulation of the stabilizing factor Angiopoietin 1. An anti-Vegf therapy is also effective to restrain tumor growth and improves vascular remodeling. Importantly, only the combination treatment suppresses intratumoral hemorrhage and restores blood vessel perfusion, suggesting that it might represent an attractive therapy targeting tumor vasculature. Similar strategies targeting other ligands of GPCRs involved in angiogenesis may identify novel therapeutic opportunities for cancer

Optimal cell tab design and cooling strategy for cylindrical lithium-ion batteries

The ability to correctly predict the behavior of lithium ion batteries is critical for safety, performance, cost and lifetime. Particularly important for this purpose is the prediction of the internal temperature of cells, because of the positive feedback between heat generation and current distribution. In this work, a comprehensive electro-thermal model is developed for a cylindrical lithium-ion cell. The model is comprehensively parameterized and validated with experimental data for 2170 cylindrical cells (LG M50T, NMC811), including direct core temperature measurements. The validated model is used to study different cell designs and cooling approaches and their effects on the internal temperature of the cell. Increasing the number of tabs connecting the jellyroll to the base of the cylindrical-can reduces the internal thermal gradient by up to 25.41%. On its own, side cooling is more effective than base cooling at removing heat, yet both result in thermal gradients within the cell of a similar magnitude, irrespective of the number of cell tabs. The results are of immediate interest to both cell manufacturers and battery pack designers, while the modelling and parameterization framework created is an essential tool for energy storage system design