240 research outputs found
Ferroelectric Thin-Film Capacitors and Piezoelectric Switches for Mobile Communication Applications
Thin-film ferroelectric capacitors have been integrated with resistors and active functions such as ESD protection into small, miniaturized modules, which enable a board space saving of up to 80%. With the optimum materials and processes, integrated capacitors with capacitance densities of up to 100 nF/mm2 for stacked capacitors combined with breakdown voltages of 90 V have been achieved. The integration of these high-density capacitors with extremely high breakdown voltage is a major accomplishment in the world of passive components and has not yet been reported for any other passive integration technology. Furthermore, thin-film tunable capacitors based on barium strontium titanate with high tuning range and high quality factor at 1 GHz have been demonstrated. Finally, piezoelectric thin films for piezoelectric switches with high switching speed have been realized
Быть марксистом: крест советского историка
Semiconductor quantum dot nanocrystals (QDs) for optical biosensing applications often contain thick polyethylene glycol (PEG)-based coatings in order to retain the advantageous QD properties in biological media such as blood, serum or plasma. On the other hand, the application of QDs in Förster resonance energy transfer (FRET) immunoassays, one of the most sensitive and most common fl uorescence-based techniques for non-competitive homogeneous biomarker diagnostics, is limited by such thick coatings due to the increased donor-acceptor distance. In particular, the combination with large IgG antibodies usually leads to distances well beyond the common FRET range of approximately 1 to 10 nm. Herein, time-gated detection of Tb-to-QD FRET for background suppression and an increased FRET range is combined with single domain antibodies (or nanobodies) for a reduced distance in order to realize highly sensitive QD-based FRET immunoassays. The “(nano) 2 ” immunoassay (combination of nanocrystals and nanobodies) is performed on a commercial clinical fl uorescence plate reader and provides sub-nanomolar (few ng/mL) detection limits of soluble epidermal growth factor receptor (EGFR) in 50 μ L buffer or serum samples. Apart from the fi rst demonstration of using nanobodies for FRET-based immunoassays, the extremely low and clinically relevant detection limits of EGFR demonstrate the direct applicability of the (nano) 2− assay to fast and sensitive biomarker detection in clinical diagnostics
Serological and virological characterization of clinically diagnosed cases of measles in suburban Khartoum
Measles continues to be a major childhood disease in terms of global
morbidity and mortality. In the main areas of its endemicity the only
available means of diagnosis are based on clinical criteria: the presence
of a maculopapular rash and fever accompanied by cough, coryza, and/or
conjunctivitis. We have studied 38 clinically diagnosed cases of measles
in Khartoum, Sudan, by means of serology, reverse transcriptase PCR
(RT-PCR) on throat swabs and virus isolation from lymphocytes. On the
basis of serology, 28 patients were diagnosed as having an acute measles
virus (MV) infection, while in 10 cases the clinical symptoms proved to
have other causes. It was shown that in cases with low serum
immunoglobulin M (IgM) levels, an additional measurement of IgG or
virus-neutralizing antibodies was necessary to discriminate between
patients with an acute MV infection sampled during an early stage of the
disease and patients who had experienced an MV infection in the more
distant past. The serological laboratory diagnosis was validated by an
MV-specific RT-PCR: for all confirmed measles cases tested a fragment of
the correct size which hybridized with a third MV-specific primer could be
amplified, while all serologically negative cases were also RT-PCR
negative. MV could be isolated from 17 out of 23 of the serologically
confirmed cases, demonstrating that virus isolation is less reliable as a
diagnostic tool than serology or RT-PCR. This study stresses the urgent
need for a rapid diagnostic field test for measles
On the importance of joint mitigation strategies for front, bulk, and rear recombination in ultrathin Cu(In,Ga)Se2 solar cells
Several optoelectronic issues, such as poor optical absorption and recombination limit the power conversion efficiency of ultrathin Cu(In,Ga)Se2 (CIGS) solar cells. To mitigate recombination losses, two combined strategies were implemented: a Potassium Fluoride (KF) Post-Deposition Treatment (PDT) and a rear interface passivation strategy based on an Aluminium Oxide (Al2O3) point contact structure. The simultaneous implementation of both strategies is reported for the first time on ultrathin CIGS devices. Electrical measurements and 1-D simulations demonstrate that, in specific conditions, devices with only KF-PDT may outperform rear interface passivated based devices. By combining KF-PDT and rear interface passivation, an enhancement in open-circuit voltage of 178 mV is reached over devices that have a rear passivation only and of 85 mV over devices with only a KF-PDT process. Time-Resolved Photoluminescence measurements showed the beneficial effects of combining KF-PDT and the rear interface passivation at decreasing recombination losses in the studied devices, enhancing charge carrier lifetime. X-ray photoelectron spectroscopy measurements indicate the presence of a In and Se rich layer that we linked to be a KInSe2 layer. Our results suggest that when bulk and front interface recombination values are very high, they dominate and individual passivation strategies work poorly. Hence, this work shows that for ultrathin devices, passivation mitigation strategies need to be implemented in tandem.publishe
On the importance of joint mitigation strategies for front, bulk, and rear recombination in ultrathin Cu(In,Ga)Se2 solar cells
Several optoelectronic issues, such as poor optical absorption and recombination limit the power conversion efficiency of ultrathin Cu(In,Ga)Se2 (CIGS) solar cells. To mitigate recombination losses, two combined strategies were implemented: a Potassium Fluoride (KF) Post-Deposition Treatment (PDT) and a rear interface passivation strategy based on an Aluminium Oxide (Al2O3) point contact structure. The simultaneous implementation of both strategies is reported for the first time on ultrathin CIGS devices. Electrical measurements and 1-D simulations demonstrate that, in specific conditions, devices with only KF-PDT may outperform rear interface passivated based devices. By combining KF-PDT and rear interface passivation, an enhancement in open-circuit voltage of 178 mV is reached over devices that have a rear passivation only and of 85 mV over devices with only a KF-PDT process. Time-Resolved Photoluminescence measurements showed the beneficial effects of combining KF-PDT and the rear interface passivation at decreasing recombination losses in the studied devices, enhancing charge carrier lifetime. X-ray photoelectron spectroscopy measurements indicate the presence of a In and Se rich layer that we linked to be a KInSe2 layer. Our results suggest that when bulk and front interface recombination values are very high, they dominate and individual passivation strategies work poorly. Hence, this work shows that for ultrathin devices, passivation mitigation strategies need to be implemented in tandem.publishe
Encapsulation of Nanostructures in a Dielectric Matrix Providing Optical Enhancement in Ultrathin Solar Cells
The incorporation of nanostructures in optoelectronic devices for enhancing their
optical performance is widely studied. However, several problems related to the
processing complexity and the low performance of the nanostructures have
hindered such actions in real-life devices. Herein, a novel way of introducing gold
nanoparticles in a solar cell structure is proposed in which the nanostructures are
encapsulated with a dielectric layer, shielding them from high temperatures and
harsh growth processing conditions of the remaining device. Through optical
simulations, an enhancement of the effective optical path length of approximately
four times the nominal thickness of the absorber layer is verified with the new
architecture. Furthermore, the proposed concept in a Cu(In,Ga)Se2 solar cell
device is demonstrated, where the short-circuit current density is increased by
17.4%. The novel structure presented in this work is achieved by combining a
bottom-up chemical approach of depositing the nanostructures with a top-down
photolithographic process, which allows for an electrical contact.This work was funded in part by the Fundação para a Ciência e a Tecnologia
(FCT) under Grants IF/00133/2015, PD/BD/142780/2018 and SFRH/BD/
146776/2019. The authors also want to acknowledge the European Union’s
Horizon 2020 Research and Innovation Programme through the ARCIGS-M
project under Grant 720887, the Special Research Fund (BOF) of Hasselt
University, the FCT through the project NovaCell (PTDC/CTM-CTM/28075/
2017), and InovSolarCells (PTDC/FISMAC/29696/2017) co-funded by FCT
and the ERDF through COMPETE2020. The authors also want to acknowledge Sandra Maya for the production of images used in this work.info:eu-repo/semantics/publishedVersio
High-velocity outflows in massive post-starburst galaxies at z > 1
We investigate the prevalence of galactic-scale outflows in post-starburst (PSB) galaxies at high redshift (1 1010M⊙) PSBs at z > 1, there is clear evidence for a strong blue-shifted component to the Mg ii absorption feature, indicative of high-velocity outflows (vout∼1150±160kms−1) in the interstellar medium. We conclude that such outflows are typical in massive PSBs at this epoch, and potentially represent the residual signature of a feedback process that quenched these galaxies. Using full spectral fitting, we also obtain a typical stellar velocity dispersion σ* for these PSBs of ∼200kms−1, which confirms they are intrinsically massive in nature (dynamical mass Md∼1011M⊙). Given that these high-z PSBs are also exceptionally compact (re ∼ 1–2kpc) and spheroidal (Sérsic index n ∼ 3), we propose that the outflowing winds may have been launched during a recent compaction event (e.g. major merger or disc collapse) that triggered either a centralized starburst or active galactic nuclei (AGN) activity. Finally, we find no evidence for AGN signatures in the optical spectra of these PSBs, suggesting they were either quenched by stellar feedback from the starburst itself, or that if AGN feedback is responsible, the AGN episode that triggered quenching does not linger into the post-starburst phase.Publisher PDFPeer reviewe
Genetic association study of QT interval highlights role for calcium signaling pathways in myocardial repolarization.
The QT interval, an electrocardiographic measure reflecting myocardial repolarization, is a heritable trait. QT prolongation is a risk factor for ventricular arrhythmias and sudden cardiac death (SCD) and could indicate the presence of the potentially lethal mendelian long-QT syndrome (LQTS). Using a genome-wide association and replication study in up to 100,000 individuals, we identified 35 common variant loci associated with QT interval that collectively explain ∼8-10% of QT-interval variation and highlight the importance of calcium regulation in myocardial repolarization. Rare variant analysis of 6 new QT interval-associated loci in 298 unrelated probands with LQTS identified coding variants not found in controls but of uncertain causality and therefore requiring validation. Several newly identified loci encode proteins that physically interact with other recognized repolarization proteins. Our integration of common variant association, expression and orthogonal protein-protein interaction screens provides new insights into cardiac electrophysiology and identifies new candidate genes for ventricular arrhythmias, LQTS and SCD
- …