7 research outputs found
Absolute O3 and OH densities measurement by two-beam UV-LED absorption spectroscopy in atmospheric pressure plasmas
Low temperature atmospheric pressure plasmas (APPs) create rich environment of reactive
particle species and chemical-physical interactions at close-to-room temperature and ambient
pressure which calls for a wide range of fundamental and application studies. APPs for
biomedical applications is one of the emerging interdisciplinary researches. Its fundamental
mechanisms have been studied using different numerical models and various diagnostic
techniques. With hundreds of particle species and complex reactions, each species requires
unique measurement techniques. In a typical APP, ozone (O3), one of the key species in
living-cells inactivation, is produced from the complex reaction chain of short-lived oxygen
atoms and excited molecules. Measurement and theoretical predictions of O3 densities can
have high uncertainties. The measurements of O3 densities inside the small plasma volume
are challenging due to the sensitivity to non-plasma parameters. In this work, two-beam
UV-LED absorption spectroscopy has been developed by using a Mach-Zehnder configuration
for O3 density measurements on the core of a homogeneous, He-O2 capacitively
coupled, 13.56 MHz RF-driven APP. The improved technique allows for high-sensitivity
measurement in the order of 10−3 absorption signal with 10−4 of uncertainty. The anticorrelation
between O3 density and gas temperature was observed and described based on
the plasma chemistry models. For controlling-parameter effect, the duty-cycle in frequency
modulations showed a significant influence on the spatial profile of O3 density in the plasma
channel. From an application perspective, the developed technique was able to provide 2D
O3 density distribution in the effluent region of a co-axial DBD kHz-driven APPJ when applied
to biological samples. The correlation between radial O3 density profiles and bacterial
inactivation areas was investigated. In the relatively realistic condition with higher H2O
vapour admixture, hydroxyl (OH) density, which is one of important radical species, can be
measured using the UV absorption technique. Thus, the setup has been adjusted in order
to measure both species. Furthermore, O3 density in the CO2-CO conversion 40.68 MHz
RF-driven APP, an important process in chemical research, was observed. The O3 density
as a function of plasma power and CO2 concentration provided a significant contribution to
the main production and destruction channels of the conversion processes
Controlled production of atomic oxygen and nitrogen in a pulsed radio-frequency atmospheric-pressure plasma
International audienceRadio-frequency driven atmospheric pressure plasmas are efficient sources for the production of reactive species at ambient pressure and close to room temperature. Pulsing the radio-frequency power input provides additional control over species production and gas temperature. Here, we demonstrate the controlled production of highly reactive atomic oxygen and nitrogen in a pulsed radio-frequency ( ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn001.gif] 13.56 MHz) atmospheric-pressure plasma, operated with a small ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn002.gif] 0.1 % air-like admixture ( ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn003.gif] \rm N_2 / ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn004.gif] \rm O_2 at ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn005.gif] 4:1 ) through variations in the duty cycle. Absolute densities of atomic oxygen and nitrogen are determined through vacuum-ultraviolet absorption spectroscopy using the DESIRS beamline at the SOLEIL synchrotron coupled with a high resolution Fourier-transform spectrometer. The neutral-gas temperature is measured using nitrogen molecular optical emission spectroscopy. For a fixed applied-voltage amplitude (234?V), varying the pulse duty cycle from 10% to 100% at a fixed 10?kHz pulse frequency enables us to regulate the densities of atomic oxygen and nitrogen over the ranges of ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn006.gif] (0.18±0.03) ? ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn007.gif] (3.7±0.1)× 10^20 ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn008.gif] \rm m^-3 and ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn009.gif] (0.2±0.06) ? ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn010.gif] (4.4±0.8) × 10^19 ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn011.gif] \rm m^-3 , respectively. The corresponding 11?K increase in the neutral-gas temperature with increased duty cycle, up to a maximum of ##IMG## [http://ej.iop.org/images/0022-3727/50/45/455204/daa8da2ieqn012.gif] (314±4) K, is relatively small. This additional degree of control, achieved through regulation of the pulse duty cycle and time-averaged power, could be of particular interest for prospective biomedical applications
Absolute ozone densities in a radio-frequency driven atmospheric pressure plasma using two-beam UV-LED absorption spectroscopy and numerical simulations
International audienceThe efficient generation of reactive oxygen species (ROS) in cold atmospheric pressure plasma jets (APPJs) is an increasingly important topic, e.g. for the treatment of temperature sensitive biological samples in the field of plasma medicine. A 13.56 MHz radio-frequency (rf) driven APPJ device operated with helium feed gas and small admixtures of oxygen (up to 1%), generating a homogeneous glow-mode plasma at low gas temperatures, was investigated. Absolute densities of ozone, one of the most prominent ROS, were measured across the 11 mm wide discharge channel by means of broadband absorption spectroscopy using the Hartley band centred at lambda = 255 nm. A two-beam setup with a reference beam in Mach--Zehnder configuration is employed for improved signal-to-noise ratio allowing high-sensitivity measurements in the investigated single-pass weak-absorbance regime. The results are correlated to gas temperature measurements, deduced from the rotational temperature of the N2 (C 3 {{{\Pi }}}u \to B 3 {{{\Pi }}}g , upsilo = 0 \to 2) optical emission from introduced air impurities. The observed opposing trends of both quantities as a function of rf power input and oxygen admixture are analysed and explained in terms of a zero-dimensional plasma-chemical kinetics simulation. It is found that the gas temperature as well as the densities of O and O2(b{}1{{{Sigma }}}g ) influence the absolute O3 densities when the rf power is varied
Reproducibility of `COST Reference Microplasma Jets'
Atmospheric pressure plasmas have been ground-breaking for plasma science and technologies, due to their significant application potential in many fields, including medicinal, biological, and environmental applications. This is predominantly due to their efficient production and delivery of chemically reactive species under ambient conditions. One of the challenges in progressing the field is comparing plasma sources and results across the community and the literature. To address this a reference plasma source was established during the `Biomedical Applications of Atmospheric Pressure Plasmas' EU COST Action MP1101. It is crucial that reference sources are reproducible. Here, we present the reproducibility and variance across multiple sources through examining various characteristics, including: absolute atomic oxygen densities, absolute ozone densities, electrical characteristics, optical emission spectroscopy, temperature measurements, and bactericidal activity. The measurements demonstrate that the tested COST jets are mainly reproducible within the intrinsic uncertainty of each measurement technique
Chemical kinetics in an atmospheric pressure helium plasma containing humidity
Atmospheric pressure plasmas are sources of biologically active oxygen and nitrogen species, which makes them potentially suitable for the use as biomedical devices. Here, experiments and simulations are combined to investigate the formation of the key reactive oxygen species, atomic oxygen (O) and hydroxyl radicals (OH), in a radio-frequency driven atmospheric pressure plasma jet operated in humidified helium. Vacuum ultra-violet high-resolution Fourier-transform absorption spectroscopy and ultra-violet broad-band absorption spectroscopy are used to measure absolute densities of O and OH. These densities increase with increasing H 2 O content in the feed gas, and approach saturation values at higher admixtures on the order of 3 × 10 14 cm −3 for OH and 3 × 10 13 cm −3 for O. Experimental results are used to benchmark densities obtained from zero-dimensional plasma chemical kinetics simulations, which reveal the dominant formation pathways. At low humidity content, O is formed from OH + by proton transfer to H 2 O, which also initiates the formation of large cluster ions. At higher humidity content, O is created by reactions between OH radicals, and lost by recombination with OH. OH is produced mainly from H 2 O + by proton transfer to H 2 O and by electron impact dissociation of H 2 O. It is lost by reactions with other OH molecules to form either H 2 O + O or H 2 O 2 . Formation pathways change as a function of humidity content and position in the plasma channel. The understanding of the chemical kinetics of O and OH gained in this work will help in the development of plasma tailoring strategies to optimise their densities in applications