589 research outputs found
Analysis of EMG based Arm Movement Sequence using Mean and Median Frequency
This paper present the studies of analysis arm movement sequence which dedicated for upper limb rehabilitation after stroke. The recovery of the arm could be optimized if the rehabilitation therapy is in a right manner. Upper limb weakness after stroke is prevalent in post-stroke rehabilitation, many factors that can deficit muscle strength there are neural, muscle structure and function change after stroke. Rehabilitation process needs to start as soon as after a stroke attack, repetitive and conceptualized. On the other hand monitoring of muscle activity also need in the rehabilitation process to evaluate muscle strength, motor function and progress in the rehabilitation process. The objective of this research is to analysis arm movement sequence using the feature frequency domain. In this study deltoid, biceps and flexor carpum ulnaris (FCU) muscles will be monitored by surface electromyography (sEMG). Five healthy subjects male and female become participants in data recording. Mean frequency (MNF) and median frequency (MDF) domain are two signals processing technique used for arm movement sequence analyzing. The analysis result showed that MNF is better than MDF where MNF produced higher frequency than MDF from each segment. From the data analysis, this movement sequence design more focuses on deltoid and FCU muscles treatment. This movement sequence has five condition movements. First undemanding, second difficult, third moderate, fourth moderate and the last cool-down movements. The best movement sequence minimum has four condition movements warming up - moderate - difficult - cool-down
Symptomatic Sinus Node Disease: Natural History After Permanent Ventricular Pacing *
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/75403/1/j.1540-8159.1979.tb03650.x.pd
Electroweak Corrections to the Charged Higgs Boson Decay into Chargino and Neutralino
The electroweak corrections to the partial widths of the decays including one-loop
diagrams of the third generation quarks and squarks, are investigated within
the Supersymmetric Standard Model. The relative corrections can reach the
values about 10%, therefore they should be taken into account for the precise
experimental measurement at future colliders.Comment: 21 pages, 6 eps figures, 1 Latex fil
Review on volumetric energy density: Influence on morphology and mechanical properties of Ti6Al4V manufactured via laser powder bed fusion
Various laser powder bed fusion (LPBF) process parameters must be considered as they can independently affect the properties of end-product. However, many studies simply examine one or two LPBF process parameters. Laser power, scan speed, scan spacing, and layer height are the four primary LPBF process parameters that contribute to volumetric energy density (VED) used in LPBF. VED is often used as an optimization metric for LPBF process parameters, because it takes all four major parameters into consideration. Thus, this paper focuses on the effect of VED on the morphology and properties of part, and also discusses on the interrelationship between all four parameters. Common range used for each parameter is 70–400 W for laser power, 70–1800 mm/s for scan speed, 50–140 µm for scan spacing, and 20–50 µm for layer height. It can be seen as the VED increased, the microstructure of as-built titanium alloy Ti6Al4V components exhibited smaller α’ martensite size and larger columnar β grain. High VED can also reduce porosity and defect formation, which will help in increasing part density. The lowest surface roughness reported for LPBF Ti6Al4V is 4.91 µm. Meanwhile, the maximum microhardness obtained is 443 HV and the highest tensile strength achieved is 1400 MPa. The VED used for studies that obtained these results are in the range of 55–65 J/mm3. Thus, it can be concluded that the most suitable VED for LPBF printing of Ti6Al4V is around 55–65 J/mm3
Analysis and prevention of dent defects formed during strip casting of twin-induced plasticity steels
Rapid-solidification experiments were conducted for understanding dent defects formed during strip casting of twin-induced plasticity (TWIP) steels. The rapid-solidification experiments reproduced the dent defects formed on these steels, which were generally located at valleys of the shot-blasted roughness on the substrate. The rapid-solidification experiment results reveal that the number of dips, the Mn content of the steel, and the surface roughness of the substrate affect the depth and size of dents formed on the solidified-shell surfaces, while the composition of the atmosphere gases and the carbon content of the steel are not factors. The formation of dents was attributed to the entrapment of gases inside the roughness valleys of the substrate surface and their volume expansion due to the temperature of the steel melt and the latent heat. The dents could be prevented when the thermal expansion of gases was suppressed by making longitudinal grooves on the substrate surface, which allowed the entrapped gases to escape. Sound solidified shells were obtained by optimizing the width and depth of the longitudinal grooves and by controlling the shot-blasting conditions.ope
Possible origins of macroscopic left-right asymmetry in organisms
I consider the microscopic mechanisms by which a particular left-right (L/R)
asymmetry is generated at the organism level from the microscopic handedness of
cytoskeletal molecules. In light of a fundamental symmetry principle, the
typical pattern-formation mechanisms of diffusion plus regulation cannot
implement the "right-hand rule"; at the microscopic level, the cell's
cytoskeleton of chiral filaments seems always to be involved, usually in
collective states driven by polymerization forces or molecular motors. It seems
particularly easy for handedness to emerge in a shear or rotation in the
background of an effectively two-dimensional system, such as the cell membrane
or a layer of cells, as this requires no pre-existing axis apart from the layer
normal. I detail a scenario involving actin/myosin layers in snails and in C.
elegans, and also one about the microtubule layer in plant cells. I also survey
the other examples that I am aware of, such as the emergence of handedness such
as the emergence of handedness in neurons, in eukaryote cell motility, and in
non-flagellated bacteria.Comment: 42 pages, 6 figures, resubmitted to J. Stat. Phys. special issue.
Major rewrite, rearranged sections/subsections, new Fig 3 + 6, new physics in
Sec 2.4 and 3.4.1, added Sec 5 and subsections of Sec
Anisotropic flow of charged hadrons, pions and (anti-)protons measured at high transverse momentum in Pb-Pb collisions at TeV
The elliptic, , triangular, , and quadrangular, , azimuthal
anisotropic flow coefficients are measured for unidentified charged particles,
pions and (anti-)protons in Pb-Pb collisions at TeV
with the ALICE detector at the Large Hadron Collider. Results obtained with the
event plane and four-particle cumulant methods are reported for the
pseudo-rapidity range at different collision centralities and as a
function of transverse momentum, , out to GeV/.
The observed non-zero elliptic and triangular flow depends only weakly on
transverse momentum for GeV/. The small dependence
of the difference between elliptic flow results obtained from the event plane
and four-particle cumulant methods suggests a common origin of flow
fluctuations up to GeV/. The magnitude of the (anti-)proton
elliptic and triangular flow is larger than that of pions out to at least
GeV/ indicating that the particle type dependence persists out
to high .Comment: 16 pages, 5 captioned figures, authors from page 11, published
version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/186
- …