5,957 research outputs found
Proof-of-principle of a new geometry for sampling calorimetry using inorganic scintillator plates
A novel geometry for a sampling calorimeter employing inorganic scintillators
as an active medium is presented. To overcome the mechanical challenges of
construction, an innovative light collection geometry has been pioneered, that
minimises the complexity of construction. First test results are presented,
demonstrating a successful signal extraction. The geometry consists of a
sampling calorimeter with passive absorber layers interleaved with layers of an
active medium made of inorganic scintillating crystals. Wavelength-shifting
(WLS) fibres run along the four long, chamfered edges of the stack,
transporting the light to photodetectors at the rear. To maximise the amount of
scintillation light reaching the WLS fibres, the scintillator chamfers are
depolished. It is shown herein that this concept is working for cerium fluoride
(CeF) as a scintillator. Coupled to it, several different types of
materials have been tested as WLS medium. In particular, materials that might
be sufficiently resistant to the High-Luminosity Large Hadron Collider
radiation environment, such as cerium-doped Lutetium-Yttrium Orthosilicate
(LYSO) and cerium-doped quartz, are compared to conventional plastic WLS
fibres. Finally, an outlook is presented on the possible optimisation of the
different components, and the construction and commissioning of a full
calorimeter cell prototype is presented.Comment: Submitted to Proceedings CALOR 2014, the 16th International
Conference on Calorimetry in High-Energy Physics, Giessen (Germany) 6 - 11
April 2014. To be published in Journal of Physics: Conference Series (10
pages, 15 figures
Research Proposal for an Experiment to Search for the Decay {\mu} -> eee
We propose an experiment (Mu3e) to search for the lepton flavour violating
decay mu+ -> e+e-e+. We aim for an ultimate sensitivity of one in 10^16
mu-decays, four orders of magnitude better than previous searches. This
sensitivity is made possible by exploiting modern silicon pixel detectors
providing high spatial resolution and hodoscopes using scintillating fibres and
tiles providing precise timing information at high particle rates.Comment: Research proposal submitted to the Paul Scherrer Institute Research
Committee for Particle Physics at the Ring Cyclotron, 104 page
Operational experience, improvements, and performance of the CDF Run II silicon vertex detector
The Collider Detector at Fermilab (CDF) pursues a broad physics program at
Fermilab's Tevatron collider. Between Run II commissioning in early 2001 and
the end of operations in September 2011, the Tevatron delivered 12 fb-1 of
integrated luminosity of p-pbar collisions at sqrt(s)=1.96 TeV. Many physics
analyses undertaken by CDF require heavy flavor tagging with large charged
particle tracking acceptance. To realize these goals, in 2001 CDF installed
eight layers of silicon microstrip detectors around its interaction region.
These detectors were designed for 2--5 years of operation, radiation doses up
to 2 Mrad (0.02 Gy), and were expected to be replaced in 2004. The sensors were
not replaced, and the Tevatron run was extended for several years beyond its
design, exposing the sensors and electronics to much higher radiation doses
than anticipated. In this paper we describe the operational challenges
encountered over the past 10 years of running the CDF silicon detectors, the
preventive measures undertaken, and the improvements made along the way to
ensure their optimal performance for collecting high quality physics data. In
addition, we describe the quantities and methods used to monitor radiation
damage in the sensors for optimal performance and summarize the detector
performance quantities important to CDF's physics program, including vertex
resolution, heavy flavor tagging, and silicon vertex trigger performance.Comment: Preprint accepted for publication in Nuclear Instruments and Methods
A (07/31/2013
The ATLAS SCT grounding and shielding concept and implementation
This paper presents a complete description of Virgo, the French-Italian gravitational wave detector. The detector, built at Cascina, near Pisa (Italy), is a very large Michelson interferometer, with 3 km-long arms. In this paper, following a presentation of the physics requirements, leading to the specifications for the construction of the detector, a detailed description of all its different elements is given. These include civil engineering infrastructures, a huge ultra-high vacuum (UHV) chamber (about 6000 cubic metres), all of the optical components, including high quality mirrors and their seismic isolating suspensions, all of the electronics required to control the interferometer and for signal detection. The expected performances of these different elements are given, leading to an overall sensitivity curve as a function of the incoming gravitational wave frequency. This description represents the detector as built and used in the first data-taking runs. Improvements in different parts have been and continue to be performed, leading to better sensitivities. These will be detailed in a forthcoming paper
Evidence for the exclusive decay Bc+- to J/psi pi+- and measurement of the mass of the Bc meson
We report first evidence for a fully reconstructed decay mode of the
B_c^{\pm} meson in the channel B_c^{\pm} \to J/psi \pi^{\pm}, with J/psi \to
mu^+mu^-. The analysis is based on an integrated luminosity of 360 pb$^{-1} in
p\bar{p} collisions at 1.96 TeV center of mass energy collected by the Collider
Detector at Fermilab. We observe 14.6 \pm 4.6 signal events with a background
of 7.1 \pm 0.9 events, and a fit to the J/psi pi^{\pm} mass spectrum yields a
B_c^{\pm} mass of 6285.7 \pm 5.3(stat) \pm 1.2(syst) MeV/c^2. The probability
of a peak of this magnitude occurring by random fluctuation in the search
region is estimated as 0.012%.Comment: 7 pages, 3 figures. Version 3, accepted by PR
Measurement of the ttbar Production Cross Section in ppbar Collisions at sqrt(s) = 1.96 TeV
We present a measurement of the top quark pair production cross section in
ppbar collisions at sqrt(s)=1.96 TeV using 318 pb^{-1} of data collected with
the Collider Detector at Fermilab. We select ttbar decays into the final states
e nu + jets and mu nu + jets, in which at least one b quark from the t-quark
decays is identified using a secondary vertex-finding algorithm. Assuming a top
quark mass of 178 GeV/c^2, we measure a cross section of 8.7 +-0.9 (stat)
+1.1-0.9 (syst) pb. We also report the first observation of ttbar with
significance greater than 5 sigma in the subsample in which both b quarks are
identified, corresponding to a cross section of 10.1 +1.6-1.4(stat)+2.0-1.3
(syst) pb.Comment: Accepted for publication in Physics Review Letters, 7 page
Top quark mass measurement using the template method at CDF
We present a measurement of the top quark mass in the lepton+jets and
dilepton channels of decays using the template method. The data
sample corresponds to an integrated luminosity of 5.6 fb of
collisions at Tevatron with TeV, collected with the CDF II
detector. The measurement is performed by constructing templates of three
kinematic variables in the lepton+jets and two kinematic variables in the
dilepton channel. The variables are two reconstructed top quark masses from
different jets-to-quarks combinations and the invariant mass of two jets from
the decay in the lepton+jets channel, and a reconstructed top quark mass
and , a variable related to the transverse mass in events with two
missing particles, in the dilepton channel. The simultaneous fit of the
templates from signal and background events in the lepton+jets and dilepton
channels to the data yields a measured top quark mass of Comment: submitted to Phys. Rev.
Search for the Higgs boson in events with missing transverse energy and b quark jets produced in proton-antiproton collisions at s**(1/2)=1.96 TeV
We search for the standard model Higgs boson produced in association with an
electroweak vector boson in events with no identified charged leptons, large
imbalance in transverse momentum, and two jets where at least one contains a
secondary vertex consistent with the decay of b hadrons. We use ~1 fb-1
integrated luminosity of proton-antiproton collisions at s**(1/2)=1.96 TeV
recorded by the CDF II experiment at the Tevatron. We find 268 (16) single
(double) b-tagged candidate events, where 248 +/- 43 (14.4 +/- 2.7) are
expected from standard model background processes. We place 95% confidence
level upper limits on the Higgs boson production cross section for several
Higgs boson masses ranging from 110 GeV/c2 to 140 GeV/c2. For a mass of 115
GeV/c2 the observed (expected) limit is 20.4 (14.2) times the standard model
prediction.Comment: 8 pages, 2 figures, submitted to Phys. Rev. Let
Polarizations of J/psi and psi(2S) Mesons Produced in ppbar Collisions at 1.96 TeV
We have measured the polarizations of \jpsi and \psiprime mesons as
functions of their transverse momentum \pt when they are produced promptly in
the rapidity range with \pt \geq 5 \pgev. The analysis is performed
using a data sample with an integrated luminosity of about 800 \ipb collected
by the CDF II detector. For both vector mesons, we find that the polarizations
become increasingly longitudinal as \pt increases from 5 to 30 \pgev. These
results are compared to the predictions of nonrelativistic quantum
chromodynamics and other contemporary models. The effective polarizations of
\jpsi and \psiprime mesons from -hadron decays are also reported.Comment: 8 pages, 7 figures, published in Physical Review Letter
Measurement of and Production in Collisions at = 1.96 TeV
The Standard Model predictions for and production are
tested using an integrated luminosity of 200 pb of \ppbar collision data
collected at the Collider Detector at Fermilab. The cross sections are measured
selecting leptonic decays of the and bosons, and photons with
transverse energy GeV that are well separated from leptons. The
production cross sections and kinematic distributions for the and
are compared to SM predictions.Comment: 7 pages, 4 figures, submitted to PR
- …