167 research outputs found
Impact of membrane orientation on the energy efficiency of dual stage pressure retarded osmosis
© 2018 Elsevier Ltd The performance of Dual Stage Pressure Retarded Osmosis (DSPRO) was analyzed using a developed computer model. DSPRO process was evaluated on Pressure Retarded Osmosis (PRO) and Forward Osmosis (FO) operating modes for different sodium chloride (NaCl) draw and feed concentrations. Simulation results revealed that the total power generation in the DSPRO process operating on the PRO mode was 2.5–5 times more than that operating on the FO mode. For DSPRO operating on the PRO mode, the higher power generation was in the case of 2 M NaCl-fresh and 32% the contribution of the second stage to the total power generation in the DSPRO. To the contrast, he total power generated in the DSPRO operating on the FO mode was in the following order 5M-0.6M > 5M-0.7M > 2M-0.01 > 2M-0.6 M. Interestingly, single stage process operating on the FO mode performed better than DSPRO process due to the severe concentration polarization effects. The results also showed that power density of the DSPRO reached a maximum amount at a hydraulic pressure less than the average osmotic pressure gradient, Δπ/2, due to the variation of optimum operating pressure of each stage. Moreover, results showed that the effective specific energy in the PRO process was lower than the maximum specific energy. However, the effective specific energy of the DSPRO was larger than that of the single stage PRO due to the rejuvenation of the salinity gradient, emphasizing the high potential of the DSPRO process for power generation
Forward osmosis process for supply of fertilizer solutions from seawater using a mixture of draw solutions
© 2016 Balaban Desalination Publications. All rights reserved. Novel desalination approaches are required to provide both drinking and agricultural water as there is ever increasing stress upon precious freshwater resources. It was our hypothesis that a modified Forward Osmosis (FO) process had the potential for production of irrigation water comprising of appropriate concentrations of fertilizers from a seawater feed. Four agents, KNO3, Na2SO4, CaNO3, and MgCl2, plus 35 g/L seawater were used as the draw and feed solutions of the FO process. Net Driving Pressure in the FO process was manipulated either by increasing the concentration of draw solution (FO process) or by increasing feed pressure (Pressure Assisted FO (PAFO) process). A series of nanofiltration (NF) and reverse osmosis (RO) membranes were used for the regeneration of draw solution. The results suggested that a PAFO process was more energy efficient than simple FO, provided the energy relating to the brine flow from the NF/RO membrane for pressurizing the feed solution of PAFO process was used. Furthermore, this study suggested using a mixture of a primary draw solution, MgCl2, and a secondary draw solution, KNO3, for NO3 supply into the irrigation water was preferable. As such, MgCl2 provided the driving force for fresh water extraction while KNO3 was the source of fertilizer in the irrigation water. Results showed that water quality provided by application of a MgCl2 + KNO3 draw solution was better than that from KNO3 or Ca(NO3)2. The concentrations of NO3 and SO4 in irrigation water were within recommended levels when the diluted draw solution was regenerated by a dual stage low-pressure RO process
Limitations of osmotic gradient resource and hydraulic pressure on the efficiency of dual stage PRO process
© 2018 Desalination Publications. All rights reserved. A dual stage PRO process has been proposed for power generation from a salinity gradient across a semi-permeable membrane. Both closed-loop and open-loop dual stage PRO system were evaluated using 2 M NaCl and Dead Sea as draw solutions, whereas the feed solution was either fresh water or seawater. The impact of feed salinity gradient resource and feed pressure on the net power generation and water flux were evaluated. The results showed that power density in stage one reached a maximum amount at ΔP = p/2, but the maximum net power generation occurred at ΔP = p/2. This result was mainly attributed to the variation of net driving pressure in stage one and two of the PRO process. The dual stage PRO process was found to perform better at high osmotic pressure gradient across the PRO membrane, for example when Dead Sea brine or highly concentrated NaCl was the draw solution. Total power generation in the dual stage PRO process was up to 40% higher than that in the conventional PRO process. This outcome was achieved through harvesting the rest of the energy remaining in the diluted draw solution. Therefore, a dual stage PRO process has the potential of maximizing power generation from a salinity gradient resource
The effect of energy recovery device and feed flow rate on the energy efficiency of reverse osmosis process
Aquaporin–graphene interface: relevance to point-of-care device for renal cell carcinoma and desalination
© 2018 The Author(s) Published by the Royal Society. All rights reserved. The aquaporin superfamily of hydrophobic integral membrane proteins constitutes water channels essential to the movement of water across the cell membrane, maintaining homeostatic equilibrium. During the passage of water between the extracellular and intracellular sides of the cell, aquaporins act as ultra-sensitive filters. Owing to their hydrophobic nature, aquaporins self-assemble in phospholipids. If a proper choice of lipids is made then the aquaporin biomimetic membrane can be used in the design of an artificial kidney. In combination with graphene, the aquaporin biomimetic membrane finds practical application in desalination and water recycling using mostly Escherichia coli AqpZ. Recently, human aquaporin 1 has emerged as an important biomarker in renal cell carcinoma. At present, the ultra-sensitive sensing of renal cell carcinoma is cumbersome. Hence, we discuss the use of epitopes from monoclonal antibodies as a probe for a point-of-care device for sensing renal cell carcinoma. This device works by immobilizing the antibody on the surface of a single-layer graphene, that is, as a microfluidic device for sensing renal cell carcinoma
The “dot-in-circle” sign in musculoskeletal mycetoma on magnetic resonance imaging and ultrasonography
10 Years of C-K Theory: A Survey on the Academic and Industrial Impacts of a Design Theory.
The goal of our research1 was to understand what is expected today from a design theory and what types of impact such type of scientific proposition may reach. To answer these questions with a grounded approach we chosed to study the developement of C-K theory as phenomenon per se that can inform our research work. C-K theory is clearly recognized as a design theory and it is a good representative of the level of generality and abstraction of contemporary design theory. Indeed, the validity of the theory as such has already been documented (e.g. Hatchuel & Weil 2002, 2003, 2008, 2009; Kazakçi 2009; Reich et al 2010; Le Masson et al 2010; Ullah et al 2012). Instead the current work sets out to understand the dissemination and the impact of the theory in both academic and industrial fields. The data collection overlooks the literature on C-K theory in English and in French, and includes interviews and feedbacks of students and industrial partners who applied C-K methodologies and tools. This research confirms the rapid diffusion and multiples impact of C-K theory. Beyond, such study signals that there are important expectations and potential impacts of a Design Theory within the field of knowledge at large. However there are strong conditions to meet these expectations: generality, generativity, and relatedness to contemporary sciences. A similar research could be done on Nam Suh's axiomatic approach to further test these conditions. It is impossible to say what will be the next generations of Design theory but it is sure that they should progress on these directions
Cosmic acceleration and phantom crossing in -gravity
In this paper, we propose two new models in gravity to realize
universe acceleration and phantom crossing due to dark torsion in the
formalism. The model parameters are constrained and the observational test are
discussed. The best fit results favors an accelerating universe with possible
phantom crossing in the near past or future followed respectively by matter and
radiation dominated era.Comment: 20 pages, 18 figures, Will appear in Astrophys Space Sc
Global, regional, and national prevalence and mortality burden of sickle cell disease, 2000-2021: a systematic analysis from the Global Burden of Disease Study 2021
BACKGROUND: Previous global analyses, with known underdiagnosis and single cause per death attribution systems, provide only a small insight into the suspected high population health effect of sickle cell disease. Completed as part of the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2021, this study delivers a comprehensive global assessment of prevalence of sickle cell disease and mortality burden by age and sex for 204 countries and territories from 2000 to 2021. METHODS: We estimated cause-specific sickle cell disease mortality using standardised GBD approaches, in which each death is assigned to a single underlying cause, to estimate mortality rates from the International Classification of Diseases (ICD)-coded vital registration, surveillance, and verbal autopsy data. In parallel, our goal was to estimate a more accurate account of sickle cell disease health burden using four types of epidemiological data on sickle cell disease: birth incidence, age-specific prevalence, with-condition mortality (total deaths), and excess mortality (excess deaths). Systematic reviews, supplemented with ICD-coded hospital discharge and insurance claims data, informed this modelling approach. We employed DisMod-MR 2.1 to triangulate between these measures-borrowing strength from predictive covariates and across age, time, and geography-and generated internally consistent estimates of incidence, prevalence, and mortality for three distinct genotypes of sickle cell disease: homozygous sickle cell disease and severe sickle cell β-thalassaemia, sickle-haemoglobin C disease, and mild sickle cell β-thalassaemia. Summing the three models yielded final estimates of incidence at birth, prevalence by age and sex, and total sickle cell disease mortality, the latter of which was compared directly against cause-specific mortality estimates to evaluate differences in mortality burden assessment and implications for the Sustainable Development Goals (SDGs). FINDINGS: Between 2000 and 2021, national incidence rates of sickle cell disease were relatively stable, but total births of babies with sickle cell disease increased globally by 13·7% (95% uncertainty interval 11·1-16·5), to 515 000 (425 000-614 000), primarily due to population growth in the Caribbean and western and central sub-Saharan Africa. The number of people living with sickle cell disease globally increased by 41·4% (38·3-44·9), from 5·46 million (4·62-6·45) in 2000 to 7·74 million (6·51-9·2) in 2021. We estimated 34 400 (25 000-45 200) cause-specific all-age deaths globally in 2021, but total sickle cell disease mortality burden was nearly 11-times higher at 376 000 (303 000-467 000). In children younger than 5 years, there were 81 100 (58 800-108 000) deaths, ranking total sickle cell disease mortality as 12th (compared to 40th for cause-specific sickle cell disease mortality) across all causes estimated by the GBD in 2021. INTERPRETATION: Our findings show a strikingly high contribution of sickle cell disease to all-cause mortality that is not apparent when each death is assigned to only a single cause. Sickle cell disease mortality burden is highest in children, especially in countries with the greatest under-5 mortality rates. Without comprehensive strategies to address morbidity and mortality associated with sickle cell disease, attainment of SDG 3.1, 3.2, and 3.4 is uncertain. Widespread data gaps and correspondingly high uncertainty in the estimates highlight the urgent need for routine and sustained surveillance efforts, further research to assess the contribution of conditions associated with sickle cell disease, and widespread deployment of evidence-based prevention and treatment for those with sickle cell disease. FUNDING: Bill & Melinda Gates Foundation
Global, regional, and national burden of traumatic brain injury and spinal cord injury, 1990-2016: a systematic analysis for the Global Burden of Disease Study 2016.
Traumatic brain injury (TBI) and spinal cord injury (SCI) are increasingly recognised as global health priorities in view of the preventability of most injuries and the complex and expensive medical care they necessitate. We aimed to measure the incidence, prevalence, and years of life lived with disability (YLDs) for TBI and SCI from all causes of injury in every country, to describe how these measures have changed between 1990 and 2016, and to estimate the proportion of TBI and SCI cases caused by different types of injury. METHODS: We used results from the Global Burden of Diseases, Injuries, and Risk Factors (GBD) Study 2016 to measure the global, regional, and national burden of TBI and SCI by age and sex. We measured the incidence and prevalence of all causes of injury requiring medical care in inpatient and outpatient records, literature studies, and survey data. By use of clinical record data, we estimated the proportion of each cause of injury that required medical care that would result in TBI or SCI being considered as the nature of injury. We used literature studies to establish standardised mortality ratios and applied differential equations to convert incidence to prevalence of long-term disability. Finally, we applied GBD disability weights to calculate YLDs. We used a Bayesian meta-regression tool for epidemiological modelling, used cause-specific mortality rates for non-fatal estimation, and adjusted our results for disability experienced with comorbid conditions. We also analysed results on the basis of the Socio-demographic Index, a compound measure of income per capita, education, and fertility. FINDINGS: In 2016, there were 27·08 million (95% uncertainty interval [UI] 24·30-30·30 million) new cases of TBI and 0·93 million (0·78-1·16 million) new cases of SCI, with age-standardised incidence rates of 369 (331-412) per 100 000 population for TBI and 13 (11-16) per 100 000 for SCI. In 2016, the number of prevalent cases of TBI was 55·50 million (53·40-57·62 million) and of SCI was 27·04 million (24·98-30·15 million). From 1990 to 2016, the age-standardised prevalence of TBI increased by 8·4% (95% UI 7·7 to 9·2), whereas that of SCI did not change significantly (-0·2% [-2·1 to 2·7]). Age-standardised incidence rates increased by 3·6% (1·8 to 5·5) for TBI, but did not change significantly for SCI (-3·6% [-7·4 to 4·0]). TBI caused 8·1 million (95% UI 6·0-10·4 million) YLDs and SCI caused 9·5 million (6·7-12·4 million) YLDs in 2016, corresponding to age-standardised rates of 111 (82-141) per 100 000 for TBI and 130 (90-170) per 100 000 for SCI. Falls and road injuries were the leading causes of new cases of TBI and SCI in most regions. INTERPRETATION: TBI and SCI constitute a considerable portion of the global injury burden and are caused primarily by falls and road injuries. The increase in incidence of TBI over time might continue in view of increases in population density, population ageing, and increasing use of motor vehicles, motorcycles, and bicycles. The number of individuals living with SCI is expected to increase in view of population growth, which is concerning because of the specialised care that people with SCI can require. Our study was limited by data sparsity in some regions, and it will be important to invest greater resources in collection of data for TBI and SCI to improve the accuracy of future assessments
- …