Effect of gamma radiation on sealing capacity characteristics of three commercially available nitrile rubber samples compared against an industrial seal used in AGR power plants

The maintenance of the Fuelling Machine operating in an AGR reactor consumes a large number of working hours and operational budget. As part of an optimisation programme research work is currently being carried out to investigate the degradation mechanism on the dynamic seal on one of these machines. The aim of this work is to understand seal behaviour under reactor working conditions in a bid to develop a mechanistic understanding of its long-term degradation and optimise the component’s maintenance schedule. The deleterious operational conditions have been identified as; activation of the sealing face through compression, exposure to a low radiation dose and cycle exposure to pressurised carbon dioxide. This part of the work investigates the effect of radiation damage on the CO2 uptake and swelling behaviour, mechanical properties and physical and chemical structure of three commercially available nitrile rubber samples which are then compared against the characteristics for the chosen seal. Exposure to radiation resulted in increased mechanical strength and resilience of the rubber as well as decreased CO2 loading capacity and swelling, further supporting the theory of cross-link formation. The seal was more resistant to the effects of radiation than the three nitrile rubber samples, however scanning electron microscopy identified the initiation and propagation of cracks without any external stress applied on the irradiated samples, the result of in-built stresses created during the manufacturing process. The next stage of this work will investigate the effect of the local environment on the radiation-induced changes in the sample’s ultimate sealing capacity

Selective recovery of copper from a synthetic metalliferous waste stream using the thiourea-functionalized ion exchange resin Puromet MTS9140

The extraction of Cu from mixed-metal acidic solutions by the thiourea-functionalized resin Puromet MTS9140 was studied. Despite being originally manufactured for precious metal recovery, a high selectivity towards Cu was observed over other first-row transition metals (>90% removal), highlighting a potential for this resin in base metal recovery circuits. Resin behaviour was characterised in batch-mode under a range of pH and sulphate concentrations and as a function of flow rate in a fixed-bed setup. In each instance, a high selectivity and capacity (max. 32.04 mg/g) towards Cu was observed and was unaffected by changes in solution chemistry. The mechanism of extraction was determined by XPS to be through reduction of Cu(II) to Cu(I) rather than chelation. Elution of Cu was achieved by the use of 0.5 M–1 M NaClO3. Despite effective Cu elution (82%), degradation of resin functionality was observed, and further detailed through the application of IC analysis to identify degradation by-products. This work is the first detailed study of a thiourea-functionalized resin being used to selectively target Cu from a complex multi-metal solution

Polymeric seal degradation in nuclear power plants: Determination of physical and mechanical properties

To assess the suitability of different materials as polymeric seals in the Nuclear Industry three commercial samples of nitrile rubber at grades BA40, BA50, and BA60 have been tested. Differential scanning calorimetry was used to find the glass transition temperature (Tg) and a Lloyds Texture Analyser 500 (TA500) was used to find the ratio of energy returned during relaxation against energy applied during compression. The mechanical properties determined from these experiments were then compared against the materials infrared spectra to infer structural characteristics. These were in turn cross-analyzed against the materials ability to swell in a liquid solvent and absorption behavior in a gaseous solvent. From this information, a statement could be made about each material's capacity to perform as a seal. It was thus found that the high energy retention and low absorption characteristics of BA40 made this material the best choice out of those studied for use as a polymeric seal in the nuclear industry. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 135, 45814

International Trade and Investment Sanctions

The purpose of this paper is to clarify the theory of international economic sanctions and to provide estimates of the short-run economic impact on South Africa of externally imposed reductions of the imports and capital flows into that country. A macroeconomic picture of South Africa's "dependence" is drawn, and the economy's vulnerability in the short run is seen to be in its capacity to import, not in exports or capital flows. Trade and capital sanctions most clearly damage South Afnca's growth potential; the short-run impact is harder to quantify. A static linear programming model of the South African economy is constructed in an attempt at this quantification. This model estimates that small sanctions would have small impact—i.e., if imports were reduced by less than one-fourth, GDP would be cut by only about one half as large a percentage as imports. Larger import reductions cause greater damage. If imports were to be cut in half, not only would GDP be seriously reduced but massive unemployment and relocation of white labor would occur.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/68182/2/10.1177_002200277902300401.pd

An alternative to cyanide leaching of waste activated carbon ash for gold and silver recovery via synergistic dual-lixiviant treatment

This study reports the development of a hydrometallurgical treatment for activated carbon ash (ACA); a waste product of the carbon-in-pulp (CIP) process used in the gold mining industry, rich in adsorbed precious metals. After an initial screening of known leaching chemistries, the research focusses on dual-lixiviant (thiourea and thiocyanate) and thiourea systems, both of which have lower environmental impact than traditional cyanide leaches. Comparing ferric sulfate and hydrogen peroxide as oxidants showed that a thiourea leach is more suited to ferric sulfate whereas the dual-lixiviant leach achieved greater extraction with hydrogen peroxide. This was believed to be due to a more favourable effective [thiourea]:[thiocyanate] molar ratio in solution. The latter demonstrated faster kinetics and improved efficiency for dissolution of gold and silver. However, both leaches had issues with silver extraction due to formation of passivating layers on the surface of the silver nanoparticles. Kinetic modelling showed both systems tended towards a mixed-controlled process. Gold extraction of 89%, with leaching reaching equilibrium within 100 min, using the dual-lixiviant process demonstrated that there is an alternative to cyanide leaches employed in gold recovery

Demonstration of the temporal matter-wave Talbot effect for trapped matter waves

We demonstrate the temporal Talbot effect for trapped matter waves using ultracold atoms in an optical lattice. We investigate the phase evolution of an array of essentially non-interacting matter waves and observe matter-wave collapse and revival in the form of a Talbot interference pattern. By using long expansion times, we image momentum space with sub-recoil resolution, allowing us to observe fractional Talbot fringes up to 10th order.Comment: 17 pages, 7 figure

Time-integrated luminosity recorded by the BABAR detector at the PEP-II e+e- collider

This article is the Preprint version of the final published artcile which can be accessed at the link below.We describe a measurement of the time-integrated luminosity of the data collected by the BABAR experiment at the PEP-II asymmetric-energy e+e- collider at the ϒ(4S), ϒ(3S), and ϒ(2S) resonances and in a continuum region below each resonance. We measure the time-integrated luminosity by counting e+e-→e+e- and (for the ϒ(4S) only) e+e-→μ+μ- candidate events, allowing additional photons in the final state. We use data-corrected simulation to determine the cross-sections and reconstruction efficiencies for these processes, as well as the major backgrounds. Due to the large cross-sections of e+e-→e+e- and e+e-→μ+μ-, the statistical uncertainties of the measurement are substantially smaller than the systematic uncertainties. The dominant systematic uncertainties are due to observed differences between data and simulation, as well as uncertainties on the cross-sections. For data collected on the ϒ(3S) and ϒ(2S) resonances, an additional uncertainty arises due to ϒ→e+e-X background. For data collected off the ϒ resonances, we estimate an additional uncertainty due to time dependent efficiency variations, which can affect the short off-resonance runs. The relative uncertainties on the luminosities of the on-resonance (off-resonance) samples are 0.43% (0.43%) for the ϒ(4S), 0.58% (0.72%) for the ϒ(3S), and 0.68% (0.88%) for the ϒ(2S).This work is supported by the US Department of Energy and National Science Foundation, the Natural Sciences and Engineering Research Council (Canada), the Commissariat à l’Energie Atomique and Institut National de Physique Nucléaire et de Physiquedes Particules (France), the Bundesministerium für Bildung und Forschung and Deutsche Forschungsgemeinschaft (Germany), the Istituto Nazionale di Fisica Nucleare (Italy), the Foundation for Fundamental Research on Matter (The Netherlands), the Research Council of Norway, the Ministry of Education and Science of the Russian Federation, Ministerio de Ciencia e Innovación (Spain), and the Science and Technology Facilities Council (United Kingdom). Individuals have received support from the Marie-Curie IEF program (European Union) and the A.P. Sloan Foundation (USA)

Measurement of the B0-anti-B0-Oscillation Frequency with Inclusive Dilepton Events

The $B^0$-$\bar B^0$ oscillation frequency has been measured with a sample of 23 million \B\bar B pairs collected with the BABAR detector at the PEP-II asymmetric B Factory at SLAC. In this sample, we select events in which both B mesons decay semileptonically and use the charge of the leptons to identify the flavor of each B meson. A simultaneous fit to the decay time difference distributions for opposite- and same-sign dilepton events gives $\Delta m_d = 0.493 \pm 0.012{(stat)}\pm 0.009{(syst)}$ ps$^{-1}$.Comment: 7 pages, 1 figure, submitted to Physical Review Letter

Kaon Production and Kaon to Pion Ratio in Au+Au Collisions at \snn=130 GeV

Mid-rapidity transverse mass spectra and multiplicity densities of charged and neutral kaons are reported for Au+Au collisions at \snn=130 GeV at RHIC. The spectra are exponential in transverse mass, with an inverse slope of about 280 MeV in central collisions. The multiplicity densities for these particles scale with the negative hadron pseudo-rapidity density. The charged kaon to pion ratios are $K^+/\pi^- = 0.161 \pm 0.002 {\rm (stat)} \pm 0.024 {\rm (syst)}$ and $K^-/\pi^- = 0.146 \pm 0.002 {\rm (stat)} \pm 0.022 {\rm (syst)}$ for the most central collisions. The $K^+/\pi^-$ ratio is lower than the same ratio observed at the SPS while the $K^-/\pi^-$ is higher than the SPS result. Both ratios are enhanced by about 50% relative to p+p and $\bar{\rm p}$+p collision data at similar energies.Comment: 6 pages, 3 figures, 1 tabl

Azimuthal anisotropy at RHIC: the first and fourth harmonics

We report the first observations of the first harmonic (directed flow, v_1), and the fourth harmonic (v_4), in the azimuthal distribution of particles with respect to the reaction plane in Au+Au collisions at the Relativistic Heavy Ion Collider (RHIC). Both measurements were done taking advantage of the large elliptic flow (v_2) generated at RHIC. From the correlation of v_2 with v_1 it is determined that v_2 is positive, or {\it in-plane}. The integrated v_4 is about a factor of 10 smaller than v_2. For the sixth (v_6) and eighth (v_8) harmonics upper limits on the magnitudes are reported.Comment: 6 pages with 3 figures, as accepted for Phys. Rev. Letters The data tables are at http://www.star.bnl.gov/central/publications/pubDetail.php?id=3