126 research outputs found
Activity and efficiency trends for the residential sector across countries
The residential sector is a major contributor to climate change, accounting for almost a quarter of global energy consumption and a fifth of CO2 emissions in 2019. Since 2000, residential consumption has grown at a sustained rate of 1%/year, driven by the development of emerging economies, despite stagnation in developed countries. The increasing demand for living space, energy services and comfort levels seems difficult to curb, especially in the developing world on its fair attempt to reduce inequality. To understand these trends, this paper analyses the trajectories of key indicators of activity and efficiency in this sector, for emerging and developed regions, as well as for major consuming nations, mainly China, United States, European Union, Russia, India, Japan and Brazil. Despite data limitations, meaningful cross-country comparisons are presented for fuel mixes, energy services and dwelling types. Heating, ventilation and air conditioning (HVAC) systems account for a third of residential consumption and will grow rapidly as increasing wealth in emerging economies allows for satisfying the thermal comfort demand. Economic development will naturally increase housing size and equipment level and reduce household size, and could close the per capita consumption gap between developing and developed regions. Efficiency improvements could reduce the energy use intensity to around 10 koe/m(2) but will not be enough to curb residential consumption. International cooperation, policy support and funding are essential to accelerate development and efficiency gains in developing countries without compromising environmental targets. In the meantime, politicians should focus on decarbonising the energy mix and promoting energy efficiency, while citizens focus on energy conservation to avoid irreversible environmental damage. (c) 2022 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Connecting to smart cities : analyzing energy times series to visualize monthly electricity peak load in residential buildings
Rapidly growing energy consumption rate is considered an alarming threat to economic stability and environmental sustainability. There is an urgent need of proposing novel solutions to mitigate the drastic impact of increased energy demand in urban cities to improve energy efficiency in smart buildings. It is commonly agreed that exploring, analyzing and visualizing energy consumption patterns in residential buildings can help to estimate their energy demands. Moreover, visualizing energy consumption patterns of residential buildings can also help to diagnose if there is any unpredictable increase in energy demand at a certain time period. However, visualizing and inferring energy consumption patterns from typical line graphs, bar charts, scatter plots is obsolete, less informative and do not provide deep and significant insight of the daily domestic demand of energy utilization. Moreover, these methods become less significant when high temporal resolution is required. In this research work, advanced data exploratory and data analytics techniques are applied on energy time series. Data exploration results are presented in the form of heatmap. Heatmap provides a significant insight of energy utilization behavior during different times of the day. Heatmap results are articulated from three analytical perspectives; descriptive analysis, diagnostic analysis and contextual analysis
Fog paradigm for local energy management systems
Cloud Computing infrastructures have been extensively deployed to support energy computation within built environments. This has ranged from predicting potential energy demand for a building (or a group of buildings), undertaking heat profile/energy distribution simulations, to understanding the impact of climate and weather on building operation. Cloud computing usage in these scenarios have benefited from resource elasticity, where the number and types of resources can change based on the complexity of the simulation being considered. While there are numerous advantages of using a cloud based energy management system, there are also significant limitations. For instance, many such systems assume that the data has been pre-staged at a cloud platform prior to simulation, and do not take account of data transfer times from the building to the simulation platform. The need for supporting computation at edge resources, which can be hosted within the building itself or shared within a building complex, has become important over recent year. Additionally, network connectivity between the sensing infrastructure within a built environment and a data centre where analysis is to be carried out can be intermittent or may fail. There is therefore also a need to better understand how computation/analysis can be carried out closer to the data capture site to complement analysis that would be undertaken at the data centre. We describe how the Fog computing paradigm can be used to support some of these requirements, extending the capability of a data centre to support energy simulation within built environments
Optimal Control for Multi-mode Systems with Discrete Costs
This paper studies optimal time-bounded control in multi-mode systems with
discrete costs. Multi-mode systems are an important subclass of linear hybrid
systems, in which there are no guards on transitions and all invariants are
global. Each state has a continuous cost attached to it, which is linear in the
sojourn time, while a discrete cost is attached to each transition taken. We
show that an optimal control for this model can be computed in NEXPTIME and
approximated in PSPACE. We also show that the one-dimensional case is simpler:
although the problem is NP-complete (and in LOGSPACE for an infinite time
horizon), we develop an FPTAS for finding an approximate solution.Comment: extended version of a FORMATS 2017 pape
Virtual Sensor Based on a Deep Learning Approach for Estimating Efficiency in Chillers
P. 307-319Intensive use of heating, ventilation and air conditioning
(HVAC) systems in buildings entails an analysis and monitoring of their
e ciency. Cooling systems are key facilities in large buildings, and par-
ticularly critical in hospitals, where chilled water production is needed
as an auxiliary resource for a large number of devices. A chiller plant
is often composed of several HVAC units running at the same time, be-
ing impossible to assess the individual cooling production and e ciency,
since a sensor is seldom installed due to the high cost. We propose a
virtual sensor that provides an estimation of the cooling production,
based on a deep learning architecture that features a 2D CNN (Convolu-
tional Neural Network) to capture relevant features on two-way matrix
arrangements of chiller data involving thermodynamic variables and the
refrigeration circuits of the chiller unit. Our approach has been tested
on an air-cooled chiller in the chiller plant at a hospital, and compared
to other state-of-the-art methods using 10-fold cross-validation. Our re-
sults report the lowest errors among the tested methods and include a
comparison of the true and estimated cooling production and e ciency
for a period of several daysS
Optimization Formulations for the Design of Low Embodied Energy Structures Made from Reused Elements
The building sector is one of the major contributors to material resource consumption, greenhouse gas emission and waste production. Load-bearing systems have a particularly large environmental impact because of their material and energy intensive manufacturing process. This paper aims to address the reduction of building structures environmental impacts through reusing structural elements for multiple service lives. Reuse avoids sourcing raw materials and requires little energy for reprocessing. However, to design a new structure reusing elements available from a stock is a challenging problem of combinatorial nature. This is because the structural system layout is a result of the available elements’ mechanical and geometric properties. In this paper, structural optimization formulations are proposed to design truss systems from available stock elements. Minimization of weight, cut-off waste and embodied energy are the objective functions subject to ultimate and serviceability constraints. Case studies focusing on embodied energy minimization are presented for: (1) three roof systems with predefined geometry and topology; (2) a bridge structure whose topology is optimized using the ground structure approach; (3) a geometry optimization to better match the optimal topology from 2 and available stock element lengths. In order to benchmark the energy savings through reuse, the optimal layouts obtained with the proposed methods are compared to weight-optimized solutions made of new material. For these case studies, the methods proposed in this work enable reusing stock elements to design structures embodying up to 71% less energy and hence having a significantly lower environmental impact with respect to structures made of new material
Species concepts in Calonectria (Cylindrocladium)
Species of Calonectria and their Cylindrocladium
anamorphs are important plant pathogens worldwide. At present 52
Cylindrocladium spp. and 37 Calonectria spp. are recognised
based on sexual compatibility, morphology and phylogenetic inference. The
polyphasic approach of integrating Biological, Morphological and Phylogenetic
Species Concepts has revolutionised the taxonomy of fungi. This review aims to
present an overview of published research on the genera Calonectria
and Cylindrocladium as they pertain to their taxonomic history. The
nomenclature as well as future research necessary for this group of fungi are
also briefly discussed
Estimating a threshold price for CO2 emissions of buildings to improve their energy performance level. Case study of a new Spanish home
Energy consumption in homes produces CO2. In many countries, building regulations are being set to enable energy efficiency performance levels to be issued. In Spain, there is a regulated procedure to certify the energy performance of buildings according to their CO2 emissions. Consequently, some software tools have been design to simulate buildings and to obtain their energy consumption and CO2 emissions. In this paper the investment, maintenance and energy consumption costs are calculated for different energy performance levels and for various climatic zones, in a single-family home. According to the results, more energy efficient buildings imply higher construction and maintenance costs, which are not compensated by lower energy costs. Therefore, under current conditions, economic criteria do not support the improvement of the energy efficiency of a dwelling. Among the possible measures to promote energy efficiency, a price on CO2 emissions is to be suggested, including the social cost in the analysis. For this purpose, the cost-optimal methodology is used. In different scenarios for the discount rate y energy prices, various prices for CO2 are obtained, depending on the climatic zone and energy performance level.Ruá Aguilar, MJ.; Guadalajara Olmeda, MN. (2015). Estimating a threshold price for CO2 emissions of buildings to improve their energy performance level. Case study of a new Spanish home. Energy Efficiency. 8(2):183-203. doi:10.1007/s12053-014-9286-2S18320382AICIA. (2009). Escala de calificación energética. Edificios de nueva construcción. Madrid: Instituto para la Diversificación y Ahorro de la Energía, Ministerio de Industria, Turismo y Comercio.Al-Homoud, M. S. (2005). Performance characteristics and practical applications of common building thermal insulation materials. Building and Environment, 40(3), 353–360.Amecke, H. (2012). The impact of energy performances certificates: a survey of German home owners. Energy Policy, 46, 4–14.Andaloro, A., Salomone, R., Ioppolo, G., & Andaloro, L. (2010). Energy certification of buildings: a comparative analysis of progress towards implementation in European countries. Energy Policy, 38(10), 5840–5866.Annunziata, E., Frey, M., & Rizzi, F. (2013). Towards nearly zero-energy buildings: the state-of-art of national regulations in Europe. Energy, 57, 125–133. doi: 10.1016/j.energy.2012.11.049 .Audenaert, A., De Boeck, L., & Roelants, K. (2010). Economic analysis of the profitability of energy-saving architectural measures for the achievement of the EPBD-standard. Energy, 35(7), 2965–2971.Bertrán, A. (2009). Las mediciones en las obras adaptadas al CTE (4th ed.). Granada: Editorial Jorge Loring S.I.Brathal, D., & Langemo, M. (2004). Facilities management: a guide for total workplace design and management. Grand Forks: Knight Printing.Brown, D. W. (1996). Facility maintenance: the manager’s practical guide and handbook. New York: AMACOM American Management Association. New York, NY 10019.Concerted Action EPBD (2008). Implementation of the energy performance of buildings directive. Country reports 2008. Brussels: Directorate General for Energy and Transport, European Commission (available at www.epbd.ca.eu and www.buildup.eu ).Concerted Action EPBD (2011). Implementing the energy performance of buildings directive. Country reports 2011. Brussels: European Union (available at www.epbd.ca.eu and www.buildup.eu ).Davies, H., & Wyatt, D. (2004). Appropriate use or method for durability and service life prediction. Building Research and Information, 32(6), 552–553.Dresner, S., & Ekins, P. (2006). Economic instruments to improve UK home energy efficiency without negative social impacts. Fiscal Studies, 27(1), 47–74.Drury, C. (2008). Management and cost accounting, 7th ed. London.Eurostat European Comission, Instituto de Diversificación y Ahorro de Energía (IDAE), Ministerio de Industria, Energía y Turismo (2011). Proyecto SECH-SPAHOUSEC. Análisis del consumo energético del sector residencial en España. Informe Final. Madrid.Fraunhofer Institute for Systems and Innovation Research ISI (Germany) (2012). Financing the energy efficient transformation of the building sector in the EU. Lessons from the ODYSSEE-MURE project.Garrido, N., Almecija, J. C., Folch, C., Martínez, I. (2011). Certificación energética de edificios. Grupo de Estudios de Energía para la Sostenibilidad (CEES). Cátedra Unesco Sostenibilidad, Universitat Politècnica de Catalunya. (Available at: upcommons.upc.edu/e-prints/bitstream/2117/11820/1/GAS Natural_090406.pdf).Gómez, J. M., & Esteban, M. A. (2010). Sostenibilidad en la edificación. Comparación de dos tipologías constructivas. Rendimiento de los recursos. Ingeniería de Edificación Universitat Politècnica de Catalunya. (Available at: upcommons.upc.edu/pfc/bitstream/2099.1/…/1/PFG_Completo.pdf).Gram-Hanssen, K., Bartiaux, F., Michael Jensen, O., & Cantaert, M. (2007). Do homeowners use energy labels? A comparison between Denmark and Belgium. Energy Policy, 35(5), 2879–2888.Institut de Tecnologia de la Construcció de Catalunya (ITEC) (1991a). Manual de uso y conservación de la vivienda. COAAT Principado de Asturias. Simancas Ediciones S.A. Valladolid.Institut de Tecnologia de la Construcció de Catalunya (ITEC). (1991b). Manteniment de l’edifici. Fitxes (1st ed.). Badalona: Gràfiques Pacífic.Institut de Tecnologia de la Construcció de Catalunya (ITEC). (1991c). Manteniment instal.lacions. Fitxes (1st ed.). Badalona: Gràfiques Pacífic.Institut de Tecnologia de la Construcció de Catalunya (ITEC). (1991d). Manteniment urbanització. Fitxes (1st ed.). Badalona: Gràfiques Pacífic.Institut de Tecnologia de la Construcció de Catalunya (ITEC). (1994). L’actualitat i el cost del manteniment en edificis d’habitatge. Guia pràctic (1st ed.). Barcelona: Gama S.L. Servicios editoriales.Institut de Tecnologia de la Construcció de Catalunya (ITEC). (1996). Ús i manteniment de l’habitatge. Quadern de l’usuari (1st ed.). Zaragoza: Gràfiques Cometa.Institut de Tecnologia de la Construcció de Catalunya (ITEC) (1997). La vivienda: Manual de uso y mantenimient, COAAT de Cantabria. 1ª ed.Institut de Tecnologia de la Construcció de Catalunya (ITEC) (1999). La vivienda: Manual de uso y mantenimiento, COAAT Principado de Asturias. 2ª ed. Simancas Edicionas S.A. Valladolid.Instituto de Diversificación y Ahorro de Energía (IDAE), Ministerio de Industria, Turismo y Comercio (MITYC) (2010). Guía Técnica: Condiciones climáticas exteriores de proyecto, (available at: http://www.minetur.gob.es/energia/desarrollo/eficienciaenergetica/rite/reconocidos/reconocidos/condicionesclimaticas.pdf ).Instituto Eduardo Torroja de Ciencias de la Construcción (IETCC) (2010). Catálogo de Elementos Constructivos del Código Técnico, versión CAT-EC-v06.3-MARZO10. Madrid.Jáber-López, J. T., Valencia-Salazar, I., Peñalvo-López, E., Álvarez-Bel, C., Rivera-López, R., Merino-Hernández, E. (2011). Are energy certification tools for buildings effective? A Spanish case study, Proceedings of the 2011 3rd International Youth Conference on Energetics. Leiria, July 7–9.Johnstone, I. M. (2001a). Energy and mass flows of housing: a model and example. Building and Environment, 36, 27–41.Johnstone, I. M. (2001b). Energy and mass flows of housing: estimating mortality. Building and Environment, 36, 43–51.Kaiser, H. H. (2001). The facilities audit. A process for improving facilities conditions. Arlington: Kirby Lithographic. APPA. The Association of Higher Education Facilities Officers.Kjaerbye, V. H. (2008). Does energy label on residential housing cause energy savings? AKF, Danish Institute of Governmental Research.La Roche, P. (2010). Calculating green house emissions for houses: analysis of the performance of several carbon counting tools in different climates. Informes de la Construcción, 62(517), 61–80.Larsen, B. M., & Nebakken, R. (1997). Norwegian emissions of CO2 1987–1994. Environmental and Resource Economics, 9, 275–290.Laustsen, J. (2008). Energy efficiency requirements in building codes, energy efficiency policies for new buildings. Paris: International Energy Agency information paper.Linares, P., & Labandeira, X. (2010). Energy efficiency: economics and policy. Journal of Economic Surveys, 24(3), 573–592.Liska, R. W. (2000). Means facilities maintenance standards. Kingston: R.S. Means Company, Inc. Construction Publishers & Consultants.Majcen, D., Itard, H., & Visscher, H. (2013). Theoretical vs. actual energy consumption of labelled dwellings in the Netherlands: discrepancies and policy implications. Energy Policy, 54, 125–136.Mercader, M. P., Olivares, M., & Ramírez de Arellano, A. (2012). Modelo de cuantificación del consumo energético en edificación. Informes de la Construcción, 62(308), 567–582.Ministry of Development of Spain. Directorate for Architecture, Housing and Planning. Report on cost optimal calculations and comparison with the current and future energy performance requirements of buildings in Spain. Version 1.1, 7th June 2013.Pérez-Lombard, L., Ortiz, J., & González, R. (2009). A review of benmarching, rating and labelling concepts within the framework of building energy certification schemes. Energy and Buildings, 41(3), 272–278.Piper, J. E. (1995). Handbook of facility management: tools and techniques, formulas and tables. Upper Saddle River: Prentice Hall Inc.Popescu, D., Bienert, S., Schützenhofer, C., & Boazu, R. (2012). Impact of energy efficiency measures on the economic value of buildings. Applied Energy, 89(1), 454–463.Ramírez de Arellano, A. (2004). Presupuestación de obras. 3ª ed. Universidad de Sevilla. Secretariado de Publicaciones. Colección Manuales Universitarios, 37.Rodríguez-González, A. B., Vinagre-Díaz, J. J., Caañamo, A. J., & Wilby, M. R. (2011). Energy and buildings, 43(4), 980–987.Ruá, M. J., & Guadalajara, N. (2013). Application of compromise programming to a semi-detached housing development in order to balance economic and environmental criteria. Journal of the Operational Research Society, 64, 459–468.Ruá, M. J., & Guadalajara, N. (2014). Using the building energy rating software for mathematically modelling operation costs in a simulated home. International Journal of Computer Mathematics. doi: 10.1080/00207160.2014.892588 .Ruá, M. J., & López-Mesa, B. (2012). Certificación energética de edificios en España y sus implicaciones económicas. Informes de la Construcción, 64(527), 307–318.Rudbeck, C. (2002). Service life of building envelope components: making it operational in economical assessment. Construction and Building Materials, 16(2), 83–89.Ruiz, M. C., & Romero, E. (2011). Energy saving in the conventional design of a Spanish house using thermal simulation. Energy and Building, 43(11), 3226–3235.Sanstad, A. H., Blumstein, C., & Stoff, S. E. (1995). How high are option values in energy-efficiency investments? Energy Policy, 23(9), 739–743.Sumner, J., Bird, L., Smith, H. (2009). Carbon taxes: a review of experience and policy design consideration. Technical Report NREL/TP-6A2-47312. National Renewable Energy Laboratory. US Department of Energy.Tuominen, P., Forsström, J., & Honkatukia, J. (2013). Economic effects of energy efficiency improvements in the Finnish building stock. Energy Policy, 52, 181–189.Ucar, A., & Balo, F. (2009). Effect of fuel type on the optimum thickness of selected insulation materials for the four different climatic regions of Turkey. Applied Energy, 86(5), 730–736.Universidad Politécnica De Madrid. Departamento de Construcción y Vías Rurales (2009). Evaluación de los costes constructivos y consumos energéticos derivados de la calificación energética de viviendas. Precost&E. Fase1.Uzsilaityte, L., & Martinaitis, V. (2010). Search for optimal solution of public building renovation in terms of life cycle. Journal of Environmental Engineering and Landscape Management, 18(2), 102–110.Verbruggen, A. (2012). Financial appraisal of efficiency investments: why the good may be the worst enemy of the best. Energy Efficiency, 5, 571–582
Fungal Planet description sheets: 1042–1111
Novel species of fungi described in this study include those from various countries as follows: Antarctica, Cladosporium arenosum from marine sediment sand. Argentina, Kosmimatamyces alatophylus (incl. Kosmimatamyces gen. nov.) from soil. Australia, Aspergillus banksianus, Aspergillus kumbius, Aspergillus luteorubrus, Aspergillus malvicolor and Aspergillus nanangensis from soil, Erysiphe medicaginis from leaves of Medicago polymorpha, Hymenotorrendiella communis on leaf litter of Eucalyptus bicostata, Lactifluus albopicri and Lactifluus austropiperatus on soil, Macalpinomyces collinsiae on Eriachne benthamii, Marasmius vagus on soil, Microdochium dawsoniorum from leaves of Sporobolus natalensis, Neopestalotiopsis nebuloides from leaves of Sporobolus elongatus, Pestalotiopsis etonensis from leaves of Sporobolus jacquemontii, Phytophthora personensis from soil associated with dying Grevillea mccutcheonii. Brazil, Aspergillus oxumiae from soil, Calvatia baixaverdensis on soil, Geastrum calycicoriaceum on leaf litter, Greeneria kielmeyerae on leaf spots of Kielmeyera coriacea. Chile, Phytophthora aysenensis on collar rot and stem of Aristotelia chilensis. Croatia, Mollisia gibbospora on fallen branch of Fagus sylvatica. Czech Republic, Neosetophoma hnaniceana from Buxus sempervirens. Ecuador, Exophiala frigidotolerans from soil. Estonia, Elaphomyces bucholtzii in soil. France, Venturia paralias from leaves of Euphorbia paralias. India, Cortinarius balteatoindicus and Cortinarius ulkhagarhiensis on leaf litter. Indonesia, Hymenotorrendiella indonesiana on Eucalyptus urophylla leaf litter. Italy, Penicillium taurinense from indoor chestnut mill. Malaysia, Hemileucoglossum kelabitense on soil, Satchmopsis pini on dead needles of Pinus tecunumanii. Poland, Lecanicillium praecognitum on insects' frass. Portugal, Neodevriesia aestuarina from saline water. Republic of Korea, Gongronella namwonensis from freshwater. Russia, Candida pellucida from Exomias pellucidus, Heterocephalacria septentrionalis as endophyte from Cladonia rangiferina, Vishniacozyma phoenicis from dates fruit, Volvariella paludosa from swamp. Slovenia, Mallocybe crassivelata on soil. South Africa, Beltraniella podocarpi, Hamatocanthoscypha podocarpi, Coleophoma podocarpi and Nothoseiridium podocarpi (incl. Nothoseiridium gen. nov.)from leaves of Podocarpus latifolius, Gyrothrix encephalarti from leaves of Encephalartos sp., Paraphyton cutaneum from skin of human patient, Phacidiella alsophilae from leaves of Alsophila capensis, and Satchmopsis metrosideri on leaf litter of Metrosideros excelsa. Spain, Cladophialophora cabanerensis from soil, Cortinarius paezii on soil, Cylindrium magnoliae from leaves of Magnolia grandiflora, Trichophoma cylindrospora (incl. Trichophoma gen. nov.) from plant debris, Tuber alcaracense in calcareus soil, Tuber buendiae in calcareus soil. Thailand, Annulohypoxylon spougei on corticated wood, Poaceascoma filiforme from leaves of unknown Poaceae. UK, Dendrostoma luteum on branch lesions of Castanea sativa, Ypsilina buttingtonensis from heartwood of Quercus sp. Ukraine, Myrmecridium phragmiticola from leaves of Phragmites australis. USA, Absidia pararepens from air, Juncomyces californiensis (incl. Juncomyces gen. nov.) from leaves of Juncus effusus, Montagnula cylindrospora from a human skin sample, Muriphila oklahomaensis (incl. Muriphila gen. nov.)on outside wall of alcohol distillery, Neofabraea eucalyptorum from leaves of Eucalyptus macrandra, Diabolocovidia claustri (incl. Diabolocovidia gen. nov.)from leaves of Serenoa repens, Paecilomyces penicilliformis from air, Pseudopezicula betulae from leaves of leaf spots of Populus tremuloides. Vietnam, Diaporthe durionigena on branches of Durio zibethinus and Roridomyces pseudoirritans on rotten wood. Morphological and culture characteristics are supported by DNA barcodes
- …