Characterization of PLA-limonene blends for food packaging applications

Polymers derived from renewable resources are now considered as promising alternatives to traditional petro-polymers as they mitigate current environmental concerns (raw renewable materials/biodegradability). D-limonene can be found in a variety of citrus, indeed is the main component of citrus oils and one of most important contributors to citrus flavor. The incorporation of limonene in PLA matrix was evaluated and quantified by Pyrolysis Gas Chromatography Mass Spectrometry (Py-GC/MS). Transparent films were obtained after the addition of the natural compound. Mechanical properties were evaluated by tensile tests. The effect of limonene on mechanical properties of PLA films was characterized by an increase in the elongation at break and a decrease in the elastic modulus. The fracture surface structure of films was evaluated by scanning electron microscopy (SEM), and homogeneous surfaces were observed in all cases. Barrier properties were reduced due to the increase of the chain mobility produced by the D-limonene. (C) 2013 Elsevier Ltd. All rights reserved.This research was supported by the Ministry of Science and Innovation of Spain (MAT2011-28468-C02-02). Marina P. Arrieta thanks Generalitat Valenciana (Spain) for a Santiago Grisolia Fellowship. Authors thank Professor Alfonso Jimenez from the University of Alicante, for his useful discussions.Arrieta, MP.; López Martínez, J.; Ferrándiz Bou, S.; Peltzer, MA. (2013). Characterization of PLA-limonene blends for food packaging applications. Polymer Testing. 32(4):760-768. https://doi.org/10.1016/j.polymertesting.2013.03.016S76076832

Functional properties of sodium and calcium caseinate antimicrobial active films containing carvacrol

Active edible films were prepared by adding carvacrol into sodium caseinate (SC) and calcium caseinate (CC) matrices plasticized with two different glycerol concentrations (25 and 35 wt%) prepared by solvent casting. Functional characterisation of these bio-films was carried out by determination of some of their physico-chemical properties, such as colour, transparency, oxygen barrier, wettability, dye permeation properties and antibacterial effectiveness against Gram negative and Gram positive bacteria. All films exhibited good performance in terms of optical properties in the CIELab space showing high transparency. Carvacrol was able to reduce CC oxygen permeability and slightly increased the surface hydrophobicity. Dye diffusion experiments were performed to evaluate permeation properties. The diffusion of dye through films revealed that SC was more permeable than CC. The agar diffusion method was used for the evaluation of the films antimicrobial effectiveness against Escherichia cell and Staphylococcus aureus. Both SC and CC edible films with carvacrol showed inhibitory effects on both bacteria. (C) 2013 Elsevier Ltd. All rights reserved.This research was supported by the Ministry of Science and Innovation of Spain through the projects MAT2011-28468-C02-01, MAT2011-28468-C02-02 and HP2008-0080. M.P. Arrieta thanks Fundacion MAPFRE for "Ignacio Hernando de Larramendi 2009-Medio Ambiente" fellowship (MAPFRE-IHL-01). Authors thank Ferrer Alimentacion S.A., for providing the caseinates powders.Arrieta, MP.; Peltzer, MA.; López Martínez, J.; Garrigós Selva, MDC.; Valente, AJM.; Jimenez Migallon, A. (2014). Functional properties of sodium and calcium caseinate antimicrobial active films containing carvacrol. Journal of Food Engineering. 121:94-101. https://doi.org/10.1016/j.jfoodeng.2013.08.015S9410112

Structure and mechanical properties of sodium and calcium caseinate edible active films with carvacrol

Edible active films based on sodium caseinate (SC) and calcium caseinate (CC) plasticized with glycerol (G) at three different concentrations and carvacrol (CRV) as active agent were prepared by solvent casting. Transparent films were obtained and their surfaces were analysed by optical microscopy and scanning electron microscopy (SEM). The influence of the addition of three different plasticizer concentrations was studied by determining tensile properties, while Fourier transformed infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) were used to evaluate the structural and thermal behavior of such films. The addition of glycerol resulted in a reduction in the elastic modulus and tensile strength, while some increase in the elongation at break was observed. In general terms, SC films showed flexibility higher than the corresponding CC counterparts. In addition, the presence of carvacrol caused further improvements in ductile properties suggesting the presence of stronger interactions between the protein matrix and glycerol, as it was also observed in thermal degradation studies. FTIR spectra of all films showed the characteristic bands and peaks corresponding to proteins as well as to primary and secondary alcohols. In summary, the best results regarding mechanical and structural properties for caseinates-based films containing carvacrol were found for the formulations with high glycerol concentrations.Marina Patricia Arrieta thanks Fundacion MAPFRE for "Ignacio Hernando de Larramendi 2009- Medio Ambiente" fellowship (MAPFRE-IHL-01). The Spanish Ministry of Economy and Competitiveness is acknowledged by financial support (project Ref. MAT2011-28468-C02-01). Authors thank to Ferrer Alimentacion S.A., for providing caseinates and to Prof. Juan Lopez Martinez (Polytechnic University of Valencia, Spain) for his collaboration and useful discussions.Arrieta, MP.; Peltzer, MA.; Garrigós, MDC.; Jimenez, A. (2013). Structure and mechanical properties of sodium and calcium caseinate edible active films with carvacrol. Journal of Food Engineering. 114(4):486-494. https://doi.org/10.1016/j.jfoodeng.2012.09.002S486494114

New Antioxidant Active Packaging Films Based on Yeast Cell Wall and Naphtho-γ-Pyrone Extract.

International audienceThe main objective of this work is the development of new active films based on yeast cell wall obtained by high-pressure homogenization (YCW-H) supplemented with naphtho-γ-pyrone (CL-NGP) extract, which is a bioactive compound produced by Aspergillus tubingensis G131 with great antioxidant potential. A complete characterization of the functional properties of the bioactive films, such as their structural, colour, thermal, mechanical, hydration and water vapour transport, was carried out to evaluate the influence of the addition of the antioxidant compounds. Likewise, the antioxidant capacity of the developed materials and the specific migration of NGPs in food simulants were evaluated. The results showed that CL-NGP extract possessed an important antioxidant activity, which was maintained after incorporation in YCW-H films. The addition of 2 and 5% CL-NGPs decreased the hydration of films and consequently improved the water vapour barrier properties. It was observed that CL-NGPs migrate in fatty food simulants and retain their antioxidant capacity in the simulant. The results obtained in this work showed that bioactive films based on yeast cell walls with the addition of CL-NGPs have the potential to be used as packaging material in systems of interest in the food industry

Multi-Component Biodegradable Materials Based on Water Kefir Grains and Yeast Biomasses: Effect of the Mixing Ratio on the Properties of the Films

The use of biopolymeric materials is restricted for some applications due to their deficient properties in comparison to synthetic polymers. Blending different biopolymers is an alternative approach to overcome these limitations. In this study, we developed new biopolymeric blend materials based on the entire biomasses of water kefir grains and yeast. Film-forming dispersions with varying ratios of water kefir to yeast (100/0, 75/25, 50/50 25/75 and 0/100) underwent ultrasonic homogenisation and thermal treatment, resulting in homogeneous dispersions with pseudoplastic behaviour and interaction between both biomasses. Films obtained by casting had a continuous microstructure without cracks or phase separation. Infrared spectroscopy revealed the interaction between the blend components, leading to a homogeneous matrix. As the water kefir content in the film increased, transparency, thermal stability, glass transition temperature and elongation at break also increased. The thermogravimetric analyses and the mechanical tests showed that the combination of water kefir and yeast biomasses resulted in stronger interpolymeric interactions compared to single biomass films. The ratio of the components did not drastically alter hydration and water transport. Our results revealed that blending water kefir grains and yeast biomasses enhanced thermal and mechanical properties. These studies provided evidence that the developed materials are suitable candidates for food packaging applications