Advancing surgical instrument safety: A screen of oxidative and alkaline prion decontaminants using real-time quaking-induced conversion with prion-coated steel beads as surgical instrument mimetic

Iatrogenic transmission of prions, the infectious agents of fatal Creutzfeldt-Jakob disease, through inefficiently decontaminated medical instruments remains a critical issue. Harsh chemical treatments are effective, but not suited for routine reprocessing of reusable surgical instruments in medical cleaning and disinfection processes due to material incompatibilities. The identification of mild detergents with activity against prions is therefore of high interest but laborious due to the low throughput of traditional assays measuring prion infectivity. Here, we report the establishment of TESSA (sTainlESs steel-bead Seed Amplification assay), a modified real-time quaking induced cyclic amplification (RT-QuIC) assay that explores the propagation activity of prions with stainless steel beads. TESSA was applied for the screening of about 70 different commercially available and novel formulations and conditions for their prion inactivation efficacy. One hypochlorite-based formulation, two commercially available alkaline formulations and a manual alkaline pre-cleaner were found to be highly effective in inactivating prions under conditions simulating automated washer-disinfector cleaning processes. The efficacy of these formulations was confirmed in vivo in a murine prion infectivity bioassay, yielding a reduction of the prion titer for bead surface adsorbed prions below detectability. Our data suggest that TESSA represents an effective method for a rapid screening of prion-inactivating detergents, and that alkaline and oxidative formulations are promising in reducing the risk of potential iatrogenic prion transmission through insufficiently decontaminated instrument surfaces

A screen of alkaline and oxidative formulations for their inactivation efficacy of metal surface adsorbed prions using a steel-bead seed amplification assay

Iatrogenic transmission of prions, the infectious agents of fatal Creutzfeldt-Jakob disease, through inefficiently decontaminated medical instruments remains a critical issue. Harsh chemical treatments are effective, but not suited for routine reprocessing of reusable surgical instruments in medical cleaning and disinfection processes due to material incompatibilities. The identification of mild detergents with activity against prions is therefore of high interest but laborious due to the low throughput of traditional assays measuring prion infectivity. Here, we report the development of TESSA (sTainlESs steel-beadSeedAmplification assay), a prion seed amplification assay that explores the propagation activity of prions with stainless steel beads. TESSA was applied for the screening of about 70 different commercially available and novel formulations and conditions for their prion inactivation efficacy. One hypochlorite-based formulation, two commercially available alkaline formulations and a manual alkaline pre-cleaner were found to be highly effective in inactivating prions under conditions simulating automated washer-disinfector cleaning processes. The efficacy of these formulations was confirmedin vivoin a murine prion infectivity bioassay, yielding a reduction of the prion titer for the bead surface adsorbed prions below detectability. Our data suggest that TESSA represents an effective method for a rapid screening of prion-inactivating detergents, and that alkaline and oxidative formulations are promising in reducing the risk of potential iatrogenic prion transmission through insufficiently decontaminated instrument surfaces

Extraction of Biofilms From Ureteral Stents for Quantification and Cultivation-Dependent and -Independent Analyses

Ureteral stenting is a common surgical procedure, which is associated with a high morbidity and economic burden, but the knowledge on the link between biofilms on these stents, morbidity, and the impact of the involved microbiota is still limited. This is partially due to a lack of methods that allow for a controlled extraction of the biofilms from stents. Development of an appropriate in vitro model to assess prevention of biofilm formation by antimicrobial coatings and biomaterials requires a profound understanding of the biofilm composition, including the involved microbiota. This work describes an analytical pipeline for the extraction of native biofilms from ureteral stents for both cultivation-dependent and -independent analysis, involving a novel mechanical abrasion method of passing stent samples through a tapered pinhole. The efficiency of this novel method was evaluated by quantifying the removed biofilm mass, numbers of cultivable bacteria, calcium content, and microscopic stent analysis after biofilm removal using 30 clinical stent samples. Furthermore, the extraction of in vitro formed Escherichia coli biofilms was evaluated by universal 16S quantitative PCR, a cultivation-independent method to demonstrate efficient biofilm removal by the new approach. The novel method enables effective contamination-free extraction of the biofilms formed on ureteral stents and their subsequent quantification, and it represents a useful tool for comprehensive examinations of biofilms on ureteral stents

The CMS Phase-1 pixel detector upgrade

The CMS detector at the CERN LHC features a silicon pixel detector as its innermost subdetector. The original CMS pixel detector has been replaced with an upgraded pixel system (CMS Phase-1 pixel detector) in the extended year-end technical stop of the LHC in 2016/2017. The upgraded CMS pixel detector is designed to cope with the higher instantaneous luminosities that have been achieved by the LHC after the upgrades to the accelerator during the first long shutdown in 2013–2014. Compared to the original pixel detector, the upgraded detector has a better tracking performance and lower mass with four barrel layers and three endcap disks on each side to provide hit coverage up to an absolute value of pseudorapidity of 2.5. This paper describes the design and construction of the CMS Phase-1 pixel detector as well as its performance from commissioning to early operation in collision data-taking.Peer reviewe

Alignment of the CMS tracker with LHC and cosmic ray data

© CERN 2014 for the benefit of the CMS collaboration, published under the terms of the Creative Commons Attribution 3.0 License by IOP Publishing Ltd and Sissa Medialab srl. Any further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation and DOI.The central component of the CMS detector is the largest silicon tracker ever built. The precise alignment of this complex device is a formidable challenge, and only achievable with a significant extension of the technologies routinely used for tracking detectors in the past. This article describes the full-scale alignment procedure as it is used during LHC operations. Among the specific features of the method are the simultaneous determination of up to 200 000 alignment parameters with tracks, the measurement of individual sensor curvature parameters, the control of systematic misalignment effects, and the implementation of the whole procedure in a multi-processor environment for high execution speed. Overall, the achieved statistical accuracy on the module alignment is found to be significantly better than 10μm

Post-cryopreservation viability of the benthic freshwater diatom Planothidium frequentissimum depends on light levels

Over recent years, several planktonic and benthic freshwater diatom taxa have been established as laboratory model strains. In common with most freshwater diatoms the pennate diatom Planothidium frequentissimum suffers irreversible cell shrinkage on prolonged maintenance by serial transfers, without induction of the sexual cycle. Therefore, alternative strategies are required for the long-term maintenance of this strain. Conventional colligative cryopreservation approaches have previously proven unsuccessful with no regrowth. However, in this study using 5% dimethyl sulfoxide (Me2SO), controlled cooling at 1 °C min−1, automated ice seeding and cooling to −40 °C with a final plunge into liquid nitrogen, viability levels were enhanced from 0.3 ± 0.4% to 80 ± 3%, by incorporating a 48 h dark-recovery phase after rewarming. Omission, or reduction, of this recovery step resulted in obvious cell damage with photo-bleaching of pigments, indicative of oxidative-stress induced cell damage, with subsequent deterioration of cellular architecture

Comprehensive computational analysis of leucine-rich repeat (LRR) proteins encoded in the genome of the diatom Phaeodactylum tricornutum

We have screened the genome of the marine diatom Phaeodactylum tricornutum for gene models encoding proteins exhibiting leucine-rich repeat (LRR) structures. In order to reveal the functionality of these proteins, their amino acid sequences were scanned for known domains and for homologies to other proteins. Additionally, proteins were categorized into different LRR-families according to the variable sequence part of their LRR. This approach enabled us to group proteins with potentially similar functionality and to classify also LRR proteins where no characterized homologues in other organisms exist. Most interestingly, we were able to indentify several transmembrane LRR-proteins, which are likely to function as receptor-like molecules. However, none of them carry additional domains that are typical for mammalian or plant-like receptors. Thus, the respective signal recognition pathways seem to be substantially different in diatoms. Moreover, P. tricornutum encodes a family of secreted LRR proteins likely to function as adhesion or binding proteins as part of the extracellular matrix. Additionally, intracellular LRR-only proteins were divided into proteins similar to RasGTPase activators, regulators of nuclear transport, and mitotic regulation. Our approach allowed us to draw a detailed picture of the conservation and diversification of LRR proteins in the marine diatom P. tricornutum

Bacteria may induce the secretion of mucin-like proteins by the diatom phaeodactylum tricornutum

Benthic diatoms live in photoautotrophic/heterotrophic biofilm communities embedded in a matrix of secreted extracellular polymeric substances. Closely associated bacteria influence their growth, aggregation, and secretion of exopolymers. We have studied a diatom/bacteria model community, in which a marine Roseobacter strain is able to grow with secreted diatom exopolymers as sole source of carbon. The strain influences the aggregation of Phaeodactylum tricornutum by inducing a morphotypic transition from planktonic, fusiform cells to benthic, oval cells. Analysis of the extracellular soluble proteome of P. tricornutum in the presence and absence of bacteria revealed constitutively expressed newly identified proteins with mucin-like domains that appear to be typical for extracellular diatom proteins. In contrast to mucins, the proline-, serine-, threonine-rich (PST) domains in these proteins were also found in combination with protease-, glucosidase and leucine-rich repeat (LRR-) domains. Bioinformatic functional predictions indicate that several of these newly identified diatom-specific proteins may be involved in algal defense, intercellular signaling, and aggregation This article is protected by copyright. All rights reserved.publishe

Isolation and biochemical characterization of underwater adhesives from diatoms

<div><p>Many aquatic organisms are able to colonize surfaces through the secretion of underwater adhesives. Diatoms are unicellular algae that have the capability to colonize any natural and man-made submerged surfaces. There is great technological interest in both mimicking and preventing diatom adhesion, yet the biomolecules responsible have so far remained unidentified. A new method for the isolation of diatom adhesive material is described and its amino acid and carbohydrate composition determined. The adhesive materials from two model diatoms show differences in their amino acid and carbohydrate compositions, but also share characteristic features including a high content of uronic acids, the predominance of hydrophilic amino acid residues, and the presence of 3,4-dihydroxyproline, an extremely rare amino acid. Proteins containing dihydroxyphenylalanine, which mediate underwater adhesion of mussels, are absent. The data on the composition of diatom adhesives are consistent with an adhesion mechanism based on complex coacervation of polyelectrolyte-like biomolecules.</p></div