Fluidised bed combustion of two species of energy crops

The use of biomass fuels for energy production through combustion has a growing application worldwide mainly for two reasons: first, the utilization of biomass for energy contributes to mitigate emission of green house gases; second, its use decreases the dependence of imported fossil fuels in Europe. The objective of this work was to study the combustion behaviour of two endogenous biomass species: cardoon (cynara cardunculus) and arundo (arundo donax), which were specially produced in energy crops plantations. Mixtures of cardoon and a forestry biomass specie (eucalyptus) were also studied to evaluate potential benefits from synergies between both biomass fuel types. The results showed that the utilization of cardoon, in pelletized form, and loose arundo as feedstock, did not give rise to any operational problems related with the feeding system. It was verified that the mono combustion of cardoon could pose problems at industrial scale in fluidised bed systems, considering the high levels of HCl and NOX emissions obtained and tendency to sinter the bed sand material. The addition of the forestry biomass to cardoon appeared to prevent the bed agglomeration problem. Furthermore, both the NOX and SO2 emissions were found to decrease at the same time suggesting potential synergy of blending different types of biomass regarding pollutant emissions and in bed agglomeration problems

Системы управления сушильной камерой для древесины

In the important efforts to decrease the net CO2 emissions to the atmosphere, new, alternative fuels are being included in the fuel mixes used in utility boilers. However, these fuels have ash properties that are different from those of the traditionally used fuels and in some cases technical problems, such as ash fouling and corrosion occur due to this. Therefore, diagnostic and predictive methods are developed and used to avoid such problems. Determination of the chemical association forms of important elements, such as potassium and sodium, in the fuel by chemical fractionation is a method well defined for coal and biofuels, such as wood pellets, bark and forest residues. Chemical fractionation is a step by step leaching method extracting water soluble salts in the first step, ion exchangeable elements, such as organically associated sodium, calcium and magnesium in the second step and acid soluble compounds such as carbonates and sulfates in the third step. The solid residue fraction consists of silicates, oxides, sulfides and other minerals. The compound extracted in the two first steps is considered reactive in the combustion with a few exceptions. In this work, it has been applied to some waste fuels, i.e. sewage sludge, straw and refuse derived fuel (RDF), as well as to coal and wood. The present work also includes results from combustion tests in a fluidised bed boiler where three blends of the investigated fuels were used. The fractionation results for the fuel blends are weighted results of the fractionations of the pure fuels discussed above which are compared with fractionations of their corresponding fly ashes. The co-combustion strategy gave very good results in reducing ash problems. Possible chemical mechanisms involved are discussed in the article. © 2008 Elsevier Ltd. All rights reserved

Study of a two steps process for the valorization of PVC-containing wastes

Published online 27 November 2012The presence of organic compounds in wastes, namely polymer based compounds, is considered a potential relevant source of energy. However, the presence of polyvinyl chloride (PVC) in their composition, causes recycling problems when a thermal process is considered for the wastes treatment [1] preventing its use on processes which the main goal is the energy recovery (Zevenhoven et al. in Fuel 81:507–510, 2002; Kim in Waste Manag 21:609–616, 2001). A possible solution should consider a first step for chlorine removal, through a pyrolysis process previously to a subsequent thermal treatment, for energetic valorization. The present work assesses a possible process for treating PVC-containing wastes in an environmentally friendly way. It is based on the effective de-chlorination of PVC-containing wastes through a pyrolysis process at low temperature before the carbonaceous residue (chlorine free fraction) being subjected to a subsequent thermal treatment for energetic valorization with the production of a synthesis gas (syngas). In the end of the process concentrated hydrochloric acid or other chlorine solutions and a syngas, with high energetic potential are obtained. The synthesis gas produced can be used in turbines or gas engines, replacing the gases obtained from fossil non-renewable resources. The validation of the proposed treatment of PVC-containing wastes in pilot scale has also been performed

Discovery of a small arterivirus gene that overlaps the GP5 coding sequence and is important for virus production

The arterivirus family (order Nidovirales) of single-stranded, positive-sense RNA viruses includes porcine respiratory and reproductive syndrome virus and equine arteritis virus (EAV). Their replicative enzymes are translated from their genomic RNA, while their seven structural proteins are encoded by a set of small, partially overlapping genes in the genomic 3′-proximal region. The latter are expressed via synthesis of a set of subgenomic mRNAs that, in general, are functionally monocistronic (except for a bicistronic mRNA encoding the E and GP2 proteins). ORF5, which encodes the major glycoprotein GP5, has been used extensively for phylogenetic analyses. However, an in-depth computational analysis now reveals the arterivirus-wide conservation of an additional AUG-initiated ORF, here termed ORF5a, that overlaps the 5′ end of ORF5. The pattern of substitutions across sequence alignments indicated that ORF5a is subject to functional constraints at the amino acid level, while an analysis of substitutions at synonymous sites in ORF5 revealed a greatly reduced frequency of substitution in the portion of ORF5 that is overlapped by ORF5a. The 43–64 aa ORF5a protein and GP5 are probably expressed from the same subgenomic mRNA, via a translation initiation mechanism involving leaky ribosomal scanning. Inactivation of ORF5a expression by reverse genetics yielded a severely crippled EAV mutant, which displayed lower titres and a tiny plaque phenotype. These defects, which could be partially complemented in ORF5a-expressing cells, indicate that the novel protein, which may be the eighth structural protein of arteriviruses, is expressed and important for arterivirus infection

Discovery of a small arterivirus gene that overlaps the GP5 coding sequence and is important for virus production

The arterivirus family (order Nidovirales) of single-stranded, positive-sense RNA viruses includes porcine respiratory and reproductive syndrome virus and equine arteritis virus (EAV). Their replicative enzymes are translated from their genomic RNA, while their seven structural proteins are encoded by a set of small, partially overlapping genes in the genomic 3′-proximal region. The latter are expressed via synthesis of a set of subgenomic mRNAs that, in general, are functionally monocistronic (except for a bicistronic mRNA encoding the E and GP2 proteins). ORF5, which encodes the major glycoprotein GP5, has been used extensively for phylogenetic analyses. However, an in-depth computational analysis now reveals the arterivirus-wide conservation of an additional AUG-initiated ORF, here termed ORF5a, that overlaps the 5′ end of ORF5. The pattern of substitutions across sequence alignments indicated that ORF5a is subject to functional constraints at the amino acid level, while an analysis of substitutions at synonymous sites in ORF5 revealed a greatly reduced frequency of substitution in the portion of ORF5 that is overlapped by ORF5a. The 43–64 aa ORF5a protein and GP5 are probably expressed from the same subgenomic mRNA, via a translation initiation mechanism involving leaky ribosomal scanning. Inactivation of ORF5a expression by reverse genetics yielded a severely crippled EAV mutant, which displayed lower titres and a tiny plaque phenotype. These defects, which could be partially complemented in ORF5a-expressing cells, indicate that the novel protein, which may be the eighth structural protein of arteriviruses, is expressed and important for arterivirus infection

SARS-coronavirus-2 replication in Vero E6 cells: replication kinetics, rapid adaptation and cytopathology

The sudden emergence of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) at the end of 2019 from the Chinese province of Hubei and its subsequent pandemic spread highlight the importance of understanding the full molecular details of coronavirus infection and pathogenesis. Here, we compared a variety of replication features of SARS-CoV-2 and SARS-CoV and analysed the cytopathology caused by the two closely related viruses in the commonly used Vero E6 cell line. Compared to SARS-CoV, SARS-CoV-2 generated higher levels of intracellular viral RNA, but strikingly about 50-fold less infectious viral progeny was recovered from the culture medium. lmmunofluorescence microscopy of SARS-CoV-2-infected cells established extensive cross-reactivity of antisera previously raised against a variety of non-structural proteins, membrane and nucleocapsid protein of SARS-CoV. Electron microscopy revealed that the ultrastructural changes induced by the two SARS viruses are very similar and occur within comparable time frames after infection. Furthermore, we determined that the sensitivity of the two viruses to three established inhibitors of coronavirus replication (remdesivir, alisporivir and chloroquine) is very similar, but that SARS-CoV-2 infection was substantially more sensitive to pre-treatment of cells with pegylated interferon alpha. An important difference between the two viruses is the fact that - upon passaging in Vero E6 cells - SARS-CoV-2 apparently is under strong selection pressure to acquire adaptive mutations in its spike protein gene. These mutations change or delete a putative furin-like cleavage site in the region connecting the S1 and S2 domains and result in a very prominent phenotypic change in plaque assays.Microscopic imaging and technolog

Ash agglomeration and deposition during combustion of poultry litter in a bubbling fluidized-bed combustor

peer-reviewedn this study, we have characterized the ash resulting from fluidized bed combustion of poultry litter as being dominated by a coarse fraction of crystalline ash composed of alkali-Ca-phosphates and a fine fraction of particulate K2SO4 and KCl. Bed agglomeration was found to be coating-induced with two distinct layers present. The inner layer (0.05–0.09 mm thick) was formed due to the reaction of gaseous potassium with the sand (SiO2) surface forming K-silicates with low melting points. Further chemical reaction on the surface of the bed material strengthened the coating forming a molten glassy phase. The outer layer was composed of loosely bound, fine particulate ash originating from the char. Thermodynamic equilibrium calculations showed slag formation in the combustion zone is highly temperature-dependent, with slag formation predicted to increase from 1.8 kg at 600 °C to 7.35 kg at 1000 °C per hour of operation (5.21 kg of ash). Of this slag phase, SiO2 and K2O were the dominant phases, accounting for almost 95%, highlighting the role of K-silicates in initiating bed agglomeration. The remaining 5% was predicted to consist mainly of Al2O3, K2SO4, and Na2O. Deposition downstream in the low-temperature regions was found to occur mostly through the vaporization–condensation mechanism, with equilibrium decreasing significantly with decreasing temperatures. The dominant alkali chloride-containing gas predicted to form in the combustion zone was KCl, which corresponds with the high KCl content in the fine baghouse ash

Kinetic and economic analysis of reactive capture of dilute carbon dioxide with Grignard reagents

Carbon Dioxide Utilisation (CDU) processes face significant challenges, especially in the energetic cost of carbon capture from flue gas and the uphill energy gradient for CO2 reduction. Both of these stumbling blocks can be addressed by using alkaline earth metal compounds, such as Grignard reagents, as sacrificial capture agents. We have investigated the performance of these reagents in their ability to both capture and activate CO2 directly from dried flue gas (essentially avoiding the costly capture process entirely) at room temperature and ambient pressures with high yield and selectivity. Naturally, to make the process sustainable, these reagents must then be recycled and regenerated. This would potentially be carried out using existing industrial processes and renewable electricity. This offers the possibility of creating a closed loop system whereby alcohols and certain hydrocarbons may be carboxylated with CO2 and renewable electricity to create higher-value products containing captured carbon. A preliminary Techno-Economic Analysis (TEA) of an example looped process has been carried out to identify the electrical and raw material supply demands and hence determine production costs. These have compared broadly favourably with existing market values

Leaching as a pretreatment process to complement torrefaction in improving co-firing characteristics of Jatropha curcas seed cake

The presence of certain inorganic elements in biomass causes issues such as slagging, fouling and corrosion when co-firing with coal for power generation. In this work, the efficacy of leaching to remove these elements from Jatropha curcas seed cake was investigated. Leaching of both untorrefied and torrefied seed cakes was carried out in Milli-Q water at temperatures of 20, 35 and 50 °C. At 20 °C, the two critical elements, potassium and chlorine, decreased by as much as 85 and 97 %, respectively. Leaching at higher temperatures was only beneficial for the more intensely torrefied biomass, since they were more resistant to leaching. The electrical conductivity and ion content of the leachates were measured, as were the inorganic elemental content, dry ash content, volatile matter content and higher heating value (HHV) of the solid seed cake. A secondary benefit of the leaching was an increase in the HHV by up to 10 %