Arene Selectivity by a Flexible Coordination Polymer Host.

The coordination polymers [Ag4 (O2 CCF3 )4 (phen)3 ]⋅phen⋅arene (1⋅phen⋅arene) (phen=phenazine; arene=toluene, p-xylene or benzene) have been synthesised from the solution phase in a series of arene solvents and crystallographically characterised. By contrast, analogous syntheses from o-xylene and m-xylene as the solvent yield the solvent-free coordination polymer [Ag4 (O2 CCF3 )4 (phen)2 ] (2). Toluene, p-xylene and benzene have been successfully used in mixed-arene syntheses to template the formation of coordination polymers 1⋅phen⋅arene, which incorporate o- or m-xylene. The selectivity of 1⋅phen⋅arene for the arene guests was determined, through pairwise competition experiments, to be p-xylene>toluene≈benzene>o-xylene>m-xylene. The largest selectivity coefficient was determined as 14.2 for p-xylene:m-xylene and the smallest was 1.0 for toluene:benzene

Enhanced MFC power production and struvite recovery by the addition of sea salts to urine

© 2016 The Authors Urine is an excellent fuel for electricity generation in Microbial Fuel Cells (MFCs), especially with practical implementations in mind. Moreover, urine has a high content in nutrients which can be easily recovered. Struvite (MgNH4PO4·6H2O) crystals naturally precipitate in urine, but this reaction can be enhanced by the introduction of additional magnesium. In this work, the effect of magnesium additives on the power output of the MFCs and on the catholyte generation is evaluated. Several magnesium sources including MgCl2, artificial sea water and a commercially available sea salts mixture for seawater preparation (SeaMix) were mixed with real fresh human urine in order to enhance struvite precipitation. The supernatant of each mixture was tested as a feedstock for the MFCs and it was evaluated in terms of power output and catholyte generation. The commercial SeaMix showed the best performance in terms of struvite precipitation, increasing the amount of struvite in the solid collected from 21% to 94%. Moreover, the SeaMix increased the maximum power performance of the MFCs by over 10% and it also changed the properties of the catholyte collected by increasing the pH, conductivity and the concentration of chloride ions. These results demonstrate that the addition of sea-salts to real urine is beneficial for both struvite recovery and electricity generation in MFCs

Contribution of nanoclays to the barrier properties of a model proton exchange membrane for fuel cell application

Direct methanol fuel cells (DMFCs) that use a proton exchange membrane (PEM) as electrolyte, is a promising alternative source of energy for the future. However, methanol crossover from the anodic side to the cathodic one is a major problem in DMFC. Proper dispersion of layered silicates within the fuel cell membrane has been proposed as a strategy for improving the barrier properties of the membrane. The validity of this approach has been tested in case of a model membrane consisting of phosphotungstic acid doped poly(vinyl alcohol). A solvent casting technique has been used, which allows the nanofiller to be delaminated by an ultrasonic pre-treatment, as confirmed by TEM and XRD analysis. The layered silicates have a favourable impact on the methanol permeability, whose the decrease overcompensates some loss in ionic conductivity