Role of thermally-stable deformation twins on the high-temperature mechanical response of an austenitic stainless steel

In the present study, a two-step thermo-mechanical processing consisting of cold work and heat treatment steps was performed to increase the operating temperature of 316 austenitic stainless steels. A hierarchical microstructure of thermally-stable, nano twin bands was achieved forming into bundles in elongated grains. The mechanical response of the samples with this microstructure was evaluated through uniaxial tension tests at temperatures ranging from 20 °C to 500 °C and compared with those from the fully annealed samples. The results demonstrate that such hierarchical microstructure leads to a significant increase in the elevated temperature yield strengths due to the presence of nano-twin boundaries and resulting decrease in dislocation mean free path and increase in dislocation storage capacity. In fact, the yield strength ratio of the twinned and annealed samples increases with increasing temperature up to 500 °C, indicating the effectiveness of pre-existing thermally-stable twin boundaries as the strengthening source at temperatures as high as 0.46 homologous temperature. The hierarchical microstructure also led to irregular serrations through dynamic strain aging in the stress-strain response at 500 °C, which is attributed to the bi-modal microstructural length-scales present in the structure affecting the diffusion distances during dynamic strain aging. This structure also increases the tensile strength, and without a total loss in ductility, even though the flow stress of the twinned samples surpasses the tensile strength of the annealed samples, especially at elevated temperatures. Total hardening rate is consistently higher in the twinned samples as compared to the annealed samples, indicating the positive role of nano-twin boundaries in the dislocation storage capacity at elevated temperatures. Overall, the present study clearly demonstrate the positive role of thermally stable nano-twins on the elevated temperature mechanical response of austenitic stainless steels

The effect of subsequent stress‐induced martensite aging on the viscoelastic properties of aged NiTiHf polycrystals

This study investigated the effect of stress‐induced martensite aging under tensile and compressive stresses on the functional and viscoelastic properties in Ni50.3Ti32.2Hf17.5 polycrystals containing dispersed H‐phase particles up to 70 nm in size obtained by preliminary austenite aging at 873 K for 3 h. It was found that stress‐induced martensite aging at 428 K for 12 h results in the appearance of a two‐way shape memory effect of −0.5% in compression and +1.8% in tension. Moreover, a significant change in viscoelastic properties can be observed: an increase in internal friction (by 25%) and a change in elastic modulus in tensile samples. The increase in internal friction during martensitic transformation after stress‐induced martensite aging is associated with the oriented growth of thermal‐induced martensite. After stress‐induced martensite aging, the elastic modulus of martensite (EM) increased by 8 GPa, and the elastic modulus of austenite (EA) decreased by 8 GPa. It was shown that stress‐induced martensite aging strongly affects the functional and viscoelastic properties of material and can be used to control them

The effect of stress-induced martensite aging in tension and compression on B2–B19′ martensitic transformation in Ni50.3Ti32.2Hf17.5 high-temperature shape memory alloy

The present study investigates the high-temperature shape memory effect (SME) in heterophase Ni50.3Ti32.2Hf17.5 polycrystals with nanosized H-phase particles after stress-induced martensite (SIM) aging in tension and compression. SIM aging created the conditions for fully reversible two-way SME with a strain of up to 50% of the one-way shape memory strain. SIM aging altered the viscoelastic properties of material, in particular, the elastic moduli of austenite and martensite increased, as did internal friction. Increased interface mobility is suggested as the reason for internal friction growth

High-field magneto-thermo-mechanical testing system for characterizing multiferroic bulk alloys

Multiferroic meta-magnetic shape memoryalloys are well known for exhibiting large magnetic field induced actuation strains, giant magnetocaloric effects, magneto-resistance, and structural and magnetic glassy behaviors. Thus, they are candidates for improving modern day sensing, actuation, magneto-resistance, and solid-state refrigeration processes. Until now, however, experimental apparatuses have typically been able to probe a limited ferroic parameter space in these materials, i.e., only concurrent thermal and mechanical responses, or magnetic and thermal responses. To overcome this barrier and better understand the coupling of multiple fields on materials behavior, a magneto-thermo-mechanical characterization device has been designed and implemented. This device is capable of compressing a specimen at load levels up to 5300 N collinearly with applied fields up to 9 T between temperatures of −100 °C and 120 °C. Uniaxial stress, strain, temperature, magnetic field, and the volumetric average magnetization have been simultaneously measured under mixed loading conditions on a NiCoMnIn meta-magnetic shape memoryalloy and a few selected results are presented here

Glassy phonon heralds a strain glass state in a shape memory alloy

Shape memory strain glasses are frustrated ferroelastic materials with glasslike slow relaxation an

Elective Cancer Surgery in COVID-19-Free Surgical Pathways During the SARS-CoV-2 Pandemic: An International, Multicenter, Comparative Cohort Study.

PURPOSE: As cancer surgery restarts after the first COVID-19 wave, health care providers urgently require data to determine where elective surgery is best performed. This study aimed to determine whether COVID-19-free surgical pathways were associated with lower postoperative pulmonary complication rates compared with hospitals with no defined pathway. PATIENTS AND METHODS: This international, multicenter cohort study included patients who underwent elective surgery for 10 solid cancer types without preoperative suspicion of SARS-CoV-2. Participating hospitals included patients from local emergence of SARS-CoV-2 until April 19, 2020. At the time of surgery, hospitals were defined as having a COVID-19-free surgical pathway (complete segregation of the operating theater, critical care, and inpatient ward areas) or no defined pathway (incomplete or no segregation, areas shared with patients with COVID-19). The primary outcome was 30-day postoperative pulmonary complications (pneumonia, acute respiratory distress syndrome, unexpected ventilation). RESULTS: Of 9,171 patients from 447 hospitals in 55 countries, 2,481 were operated on in COVID-19-free surgical pathways. Patients who underwent surgery within COVID-19-free surgical pathways were younger with fewer comorbidities than those in hospitals with no defined pathway but with similar proportions of major surgery. After adjustment, pulmonary complication rates were lower with COVID-19-free surgical pathways (2.2% v 4.9%; adjusted odds ratio [aOR], 0.62; 95% CI, 0.44 to 0.86). This was consistent in sensitivity analyses for low-risk patients (American Society of Anesthesiologists grade 1/2), propensity score-matched models, and patients with negative SARS-CoV-2 preoperative tests. The postoperative SARS-CoV-2 infection rate was also lower in COVID-19-free surgical pathways (2.1% v 3.6%; aOR, 0.53; 95% CI, 0.36 to 0.76). CONCLUSION: Within available resources, dedicated COVID-19-free surgical pathways should be established to provide safe elective cancer surgery during current and before future SARS-CoV-2 outbreaks

Elective cancer surgery in COVID-19-free surgical pathways during the SARS-CoV-2 pandemic: An international, multicenter, comparative cohort study

PURPOSE As cancer surgery restarts after the first COVID-19 wave, health care providers urgently require data to determine where elective surgery is best performed. This study aimed to determine whether COVID-19–free surgical pathways were associated with lower postoperative pulmonary complication rates compared with hospitals with no defined pathway. PATIENTS AND METHODS This international, multicenter cohort study included patients who underwent elective surgery for 10 solid cancer types without preoperative suspicion of SARS-CoV-2. Participating hospitals included patients from local emergence of SARS-CoV-2 until April 19, 2020. At the time of surgery, hospitals were defined as having a COVID-19–free surgical pathway (complete segregation of the operating theater, critical care, and inpatient ward areas) or no defined pathway (incomplete or no segregation, areas shared with patients with COVID-19). The primary outcome was 30-day postoperative pulmonary complications (pneumonia, acute respiratory distress syndrome, unexpected ventilation). RESULTS Of 9,171 patients from 447 hospitals in 55 countries, 2,481 were operated on in COVID-19–free surgical pathways. Patients who underwent surgery within COVID-19–free surgical pathways were younger with fewer comorbidities than those in hospitals with no defined pathway but with similar proportions of major surgery. After adjustment, pulmonary complication rates were lower with COVID-19–free surgical pathways (2.2% v 4.9%; adjusted odds ratio [aOR], 0.62; 95% CI, 0.44 to 0.86). This was consistent in sensitivity analyses for low-risk patients (American Society of Anesthesiologists grade 1/2), propensity score–matched models, and patients with negative SARS-CoV-2 preoperative tests. The postoperative SARS-CoV-2 infection rate was also lower in COVID-19–free surgical pathways (2.1% v 3.6%; aOR, 0.53; 95% CI, 0.36 to 0.76). CONCLUSION Within available resources, dedicated COVID-19–free surgical pathways should be established to provide safe elective cancer surgery during current and before future SARS-CoV-2 outbreaks

Proceedings of the 24th Paediatric Rheumatology European Society Congress: Part three

From Springer Nature via Jisc Publications Router.Publication status: PublishedHistory: collection 2017-09, epub 2017-09-0

The DUNE far detector vertical drift technology. Technical design report

DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals