Diminished temperature and vegetation seasonality over northern high latitudes

Global temperature is increasing, especially over northern lands (>50° N), owing to positive feedbacks1. As this increase is most pronounced in winter, temperature seasonality (ST)—conventionally defined as the difference between summer and winter temperatures—is diminishing over time2, a phenomenon that is analogous to its equatorward decline at an annual scale. The initiation, termination and performance of vegetation photosynthetic activity are tied to threshold temperatures3. Trends in the timing of these thresholds and cumulative temperatures above them may alter vegetation productivity, or modify vegetation seasonality (SV), over time. The relationship between ST and SV is critically examined here with newly improved ground and satellite data sets. The observed diminishment of ST and SV is equivalent to 4° and 7° (5° and 6°) latitudinal shift equatorward during the past 30 years in the Arctic (boreal) region. Analysis of simulations from 17 state-of-the-art climate models4 indicates an additional STdiminishment equivalent to a 20° equatorward shift could occur this century. How SV will change in response to such large projected ST declines and the impact this will have on ecosystem services5 are not well understood. Hence the need for continued monitoring6 of northern lands as their seasonal temperature profiles evolve to resemble thosefurther south.Lopullinen vertaisarvioitu käsikirjoitu

Impacts on terrestrial biodiversity of moving from a 2ᵒC to a 1.5ᵒC target

We applied a recently developed tool to examine the reduction in climate risk to biodiversity in moving from a 2°C to a 1.5°C target. We then reviewed the recent literature examining the impact of (a) land-based mitigation options and (b) land-based greenhouse gas removal options on biodiversity. We show that holding warming to 1.5°C versus 2°C can significantly reduce the number of species facing a potential loss of 50% of their climatic range. Further, there would be an increase of 5.5–14% of the globe that could potentially act as climatic refugia for plants and animals, an area equivalent to the current global protected area network. Efforts to meet the 1.5°C target through mitigation could largely be consistent with biodiversity protection/enhancement. For impacts of land-based greenhouse gas removal technologies on biodiversity, some (e.g. soil carbon sequestration) could be neutral or positive, others (e.g. bioenergy with carbon capture and storage) are likely to lead to conflicts, while still others (e.g. afforestation/reforestation) are context-specific, when applied at scales necessary for meaningful greenhouse gas removal. Additional effort to meet the 1.5°C target presents some risks, particularly if inappropriately managed, but it also presents opportunities. This article is part of the theme issue ‘The Paris Agreement: understanding the physical and social challenges for a warming world of 1.5°C above pre-industrial levels'

Fabrication of highly dense isotropic Nd-Fe-B bonded magnets via extrusion-based additive manufacturing

Isotropic bonded magnets with a high loading fraction of 70 vol.% Nd-Fe-B are fabricated via an extrusion-based additive manufacturing, or 3D printing system that enables rapid production of large parts for the first time. The density of the printed magnet is 5.15 g/cm3. The room temperature magnetic properties are: intrinsic coercivity Hci = 8.9 kOe (708.2 kA/m), remanence Br = 5.8 kG (0.58 Tesla), and energy product (BH)max = 7.3 MGOe (58.1 kJ/m3). The as-printed magnets are then coated with two types of polymers, both of which improve the thermal stability at 127 {\deg}C as revealed by flux aging loss measurements. Tensile tests performed at 25 {\deg}C and 100 {\deg}C show that the ultimate tensile stress (UTS) increases with increasing loading fraction of the magnet powder, and decreases with increasing temperature. AC magnetic susceptibility and resistivity measurements show that the 3D printed Nd-Fe-B bonded magnets exhibit extremely low eddy current loss and high resistivity. Finally, we show that through back electromotive force measurements that motors installed with 3D printed Nd-Fe-B magnets exhibit similar performance as compared to those installed with sintered ferrites

Carbon storage of headwater riparian zones in an agricultural landscape

<p>Abstract</p> <p>Background</p> <p>In agricultural regions, streamside forests have been reduced in age and extent, or removed entirely to maximize arable cropland. Restoring and reforesting such riparian zones to mature forest, particularly along headwater streams (which constitute 90% of stream network length) would both increase carbon storage and improve water quality. Age and management-related cover/condition classes of headwater stream networks can be used to rapidly inventory carbon storage and sequestration potential if carbon storage capacity of conditions classes and their relative distribution on the landscape are known.</p> <p>Results</p> <p>Based on the distribution of riparian zone cover/condition classes in sampled headwater reaches, current and potential carbon storage was extrapolated to the remainder of the North Carolina Coastal Plain stream network. Carbon stored in headwater riparian reaches is only about 40% of its potential capacity, based on 242 MgC/ha stored in sampled mature riparian forest (forest > 50 y old). The carbon deficit along 57,700 km headwater Coastal Plain streams is equivalent to about 25TgC in 30-m-wide riparian buffer zones and 50 TgC in 60-m-wide buffer zones.</p> <p>Conclusions</p> <p>Estimating carbon storage in recognizable age-and cover-related condition classes provides a rapid way to better inventory current carbon storage, estimate storage capacity, and calculate the potential for additional storage. In light of the particular importance of buffer zones in headwater reaches in agricultural landscapes in ameliorating nutrient and sediment input to streams, encouraging the restoration of riparian zones to mature forest along headwater reaches worldwide has the potential to not only improve water quality, but also simultaneously reduce atmospheric CO₂.</p

Preclinical efficacy of azacitidine and venetoclax for infant KMT2A-rearranged acute lymphoblastic leukemia reveals a new therapeutic strategy

Infants with KMT2A-rearranged B-cell acute lymphoblastic leukemia (ALL) have a dismal prognosis. Survival outcomes have remained static in recent decades despite treatment intensification and novel therapies are urgently required. KMT2A-rearranged infant ALL cells are characterized by an abundance of promoter hypermethylation and exhibit high BCL-2 expression, highlighting potential for therapeutic targeting. Here, we show that hypomethylating agents exhibit in vitro additivity when combined with most conventional chemotherapeutic agents. However, in a subset of samples an antagonistic effect was seen between several agents. This was most evident when hypomethylating agents were combined with methotrexate, with upregulation of ATP-binding cassette transporters identified as a potential mechanism. Single agent treatment with azacitidine and decitabine significantly prolonged in vivo survival in KMT2A-rearranged infant ALL xenografts. Treatment of KMT2A-rearranged infant ALL cell lines with azacitidine and decitabine led to differential genome-wide DNA methylation, changes in gene expression and thermal proteome profiling revealed the target protein-binding landscape of these agents. The selective BCL-2 inhibitor, venetoclax, exhibited in vitro additivity in combination with hypomethylating or conventional chemotherapeutic agents. The addition of venetoclax to azacitidine resulted in a significant in vivo survival advantage indicating the therapeutic potential of this combination to improve outcome for infants with KMT2A-rearranged ALL

What are we measuring? A critique of range of motion methods currently in use for Dupuytren's disease and recommendations for practice

Background: Range of motion is the most frequently reported measure used in practice to evaluate outcomes. A goniometer is the most reliable tool to assess range of motion yet, the lack of consistency in reporting prevents comparison between studies. The aim of this study is to identify how range of motion is currently assessed and reported in Dupuytren’s disease literature. Following analysis recommendations for practice will be made to enable consistency in future studies for comparability. This paper highlights the variation in range of motion reporting in Dupuytren’s disease. Methods: A Participants, Intervention, Comparison, Outcomes and Study design format was used for the search strategy and search terms. Surgery, needle fasciotomy or collagenase injection for primary or recurrent Dupuytren’s disease in adults were included if outcomes were monitored using range of motion to record change. A literature search was performed in May 2013 using subject heading and free-text terms to also capture electronic publications ahead of print. In total 638 publications were identified and following screening 90 articles met the inclusion criteria. Data was extracted and entered onto a spreadsheet for analysis. A thematic analysis was carried out to establish any duplication, resulting in the final range of motion measures identified. Results: Range of motion measurement lacked clarity, with goniometry reportedly used in only 43 of the 90 studies, 16 stated the use of a range of motion protocol. A total of 24 different descriptors were identified describing range of motion in the 90 studies. While some studies reported active range of motion, others reported passive or were unclear. Eight of the 24 categories were identified through thematic analysis as possibly describing the same measure, ‘lack of joint extension’ and accounted for the most frequently used. Conclusions: Published studies lacked clarity in reporting range of motion, preventing data comparison and meta-analysis. Percentage change lacks context and without access to raw data, does not allow direct comparison of baseline characteristics. A clear description of what is being measured within each study was required. It is recommended that range of motion measuring and reporting for Dupuytren’s disease requires consistency to address issues that fall into 3 main categories:- Definition of terms Protocol statement Outcome reportin

Reproducibility of the serum lipid response to coffee oil in healthy volunteers

BACKGROUND: Humans and animals show a certain consistency in the response of their serum lipids to fat-modified diets. This may indicate a genetic basis underlying this response. Coffee oil might be used as a model substance to investigate which genes determine differences in the serum lipid response. Before carrying out such studies our objective was to investigate to what extent the effect of coffee oil on serum lipid concentrations is reproducible within subjects. METHODS: The serum lipid response of 32 healthy volunteers was measured twice in separate five-week periods in which coffee oil was administered (69 mg cafestol / day). RESULTS: Total cholesterol levels increased by 24% in period 1 (range:0;52%) and 18% in period 2 (1;48%), LDL cholesterol by 29 % (-9;71%) and 20% (-12;57%), triglycerides by 66% (16;175%) and 58% (-13;202%), and HDL cholesterol did not change significantly: The range of the HDL response was -19;25% in period 1 and -20;33% in period 2. The correlation between the two responses was 0.20 (95%CI -0.16, 0.51) for total cholesterol, 0.16 (95%CI -0.20, 0.48) for LDL, 0.67 (95%CI 0.42, 0.83) for HDL, and 0.77 (95%CI 0.56, 0.88) for triglycerides. CONCLUSIONS: The responses of total and LDL cholesterol to coffee oil were poorly reproducible within subjects. The responses of HDL and triglycerides, however, appeared to be highly reproducible. Therefore, investigating the genetic sources of the variation in the serum-lipid response to coffee oil is more promising for HDL and triglycerides

Emergent global patterns of ecosystem structure and function from a mechanistic general ecosystem model

Anthropogenic activities are causing widespread degradation of ecosystems worldwide, threatening the ecosystem services upon which all human life depends. Improved understanding of this degradation is urgently needed to improve avoidance and mitigation measures. One tool to assist these efforts is predictive models of ecosystem structure and function that are mechanistic: based on fundamental ecological principles. Here we present the first mechanistic General Ecosystem Model (GEM) of ecosystem structure and function that is both global and applies in all terrestrial and marine environments. Functional forms and parameter values were derived from the theoretical and empirical literature where possible. Simulations of the fate of all organisms with body masses between 10 µg and 150,000 kg (a range of 14 orders of magnitude) across the globe led to emergent properties at individual (e.g., growth rate), community (e.g., biomass turnover rates), ecosystem (e.g., trophic pyramids), and macroecological scales (e.g., global patterns of trophic structure) that are in general agreement with current data and theory. These properties emerged from our encoding of the biology of, and interactions among, individual organisms without any direct constraints on the properties themselves. Our results indicate that ecologists have gathered sufficient information to begin to build realistic, global, and mechanistic models of ecosystems, capable of predicting a diverse range of ecosystem properties and their response to human pressures

Maternal health-related quality of life after induction of labor or expectant monitoring in pregnancy complicated by intrauterine growth retardation beyond 36 weeks

Objective: Pregnancies complicated by intrauterine growth retardation (IUGR) beyond 36 weeks of gestation are at increased risk of neonatal morbidity and mortality. Optimal treatment in IUGR at term is highly debated. Results from the multicenter DIGITAT (Disproportionate Intrauterine Growth Intervention Trial At Term) trial show that induction of labor and expectant monitoring result in equal neonatal and maternal outcomes for comparable cesarean section rates. We report the maternal health-related quality of life (HR-QoL) that was measured alongside the trial at several points in time. Methods: Both randomized and non-randomized women were asked to participate in the HR-QoL study. Women were asked to fill out written validated questionnaires, covering background characteristics, condition-specific issues and the Short Form (SF-36), European Quality of Life (EuroQoL 6D3L), Hospital Anxiety and Depression scale (HADS), and Symptom Check List (SCL-90) at baseline, 6 weeks postpartum and 6 months postpartum. We compared the difference scores of all summary measures between the two management strategies by ANOVA. A repeated measures multivariate mixed model wa

A three-year cohort study of the relationships between coping, job stress and burnout after a counselling intervention for help-seeking physicians

<p>Abstract</p> <p>Background</p> <p>Knowledge about important factors in reduction of burnout is needed, but there is a dearth of burnout intervention program studies and their effects among physicians. The present three-year follow-up study aimed to investigate the roles of coping strategies, job stress and personality traits in burnout reduction after a counselling intervention for distressed physicians.</p> <p>Methods</p> <p>227 physicians who attended a counselling intervention for burnout at the Resource Centre Villa Sana, Norway in 2003-2005, were followed with self-report assessments at baseline, one-year, and three-year follow-up. Main outcome measures were emotional exhaustion (one dimension of burnout), job stress, coping strategies and neuroticism. Changes in these measures were analyzed with repeated measures ANOVA. Temporal relationships between changes were examined using structural modelling with cross-lagged and synchronous panel models.</p> <p>Results</p> <p>184 physicians (81%, 83 men, 101 women) completed the three-year follow-up assessment. Significantly reduced levels of emotional exhaustion, job stress, and emotion-focused coping strategies from baseline to one year after the intervention, were maintained at three-year follow-up.</p> <p>Panel modelling indicated that changes in emotion-focused coping (z = 4.05, p < 0.001) and job stress (z = 3.16, p < 0.01) preceded changes in emotional exhaustion from baseline to three-year follow-up. A similar pattern was found from baseline to one-year follow-up.</p> <p>Conclusion</p> <p>A sequential relationship indicated that reduction in emotion-focused coping and in job stress preceded reduction in emotional exhaustion. As a consequence, coping strategies and job stress could be important foci in intervention programs that aim to reduce or prevent burnout in help-seeking physicians.</p