325 research outputs found
Alternative job search strategies in remote rural and peri-urban labour markets: the role of social networks
This paper examines the importance of informal methods (especially social networking) to the job search strategies used by unemployed people. It compares three areas: a small rural town; a larger, more sparsely populated, remote rural area; and a centrally-located, peri-urban labour market. The analysis is based first on survey research undertaken with 490 job seekers across the study areas. Emerging issues were then followed up during a series of twelve focus groups. The survey research showed that job seekers in the rural study areas were significantly more likely to use social networks to look for work. However, those who had experienced repeated or long-term periods out of work, the unskilled and young people were significantly less likely to use such networks. Focus groups confirmed the perceived importance of social networking to the job search process in rural areas, in contrast to the more marginal role such methods appear to play in peri-urban settings. For many rural job seekers, formal job search activities conducted through Jobcentres were seen as largely symbolic, lacking the practical value of social networking. These results suggest that service providers seeking to assist unemployed people in rural areas need to address the problems faced by many disadvantaged job seekers who are currently caught between their lack of social network relations and the absence of local public employment service facilities in more remote communities
Recommended from our members
Exergy analysis of a hybrid ground-source heat pump system
In contrast to energy analysis, the analysis of exergy allows the evaluation of the quality of different energy flows and enables a comprehensive assessment of inefficiencies within a system and its individual components by accounting for exergy consumption. While exergy analysis methods have been applied to a variety of conventional and renewable energy supply systems, there is still a lack of knowledge regarding the exergy flows and exergy efficiency of hybrid ground-source heat pump systems with a supplementary boiler. In this study, we develop a thermodynamic model for each subsystem in a hybrid heating and cooling system of an existing building by applying the concept of cool and warm exergy. A comparison of the exergy consumption of the hybrid system in heating and cooling reveals that there are significant differences regarding the components that attribute most to the overall exergy consumption in the system. Due to these differences the true exergy performance of the system in heating mode (~30%) is twice as high as for cooling mode (~15%), while the natural exergy performance is considerably better in cooling mode (~26% to ~3%). Potential measures to enhance the exergy performance based on changes in the operational settings of the system and the improvement of the building envelope were found to have a more significant effect on heating performance than on cooling performance. In general, measures that affect the amount of thermal energy delivered by the system appear to be more effective than changes to the operational settings of energy supply systems
Recommended from our members
Bayesian inference of structural error in inverse models of thermal response tests
For the design of ground-source heat pumps (GSHPs), two design parameters, namely the ground thermal conductivity and borehole thermal resistance are estimated by interpreting thermal response test (TRT) data using a physical model. In most cases, the parameters are fitted to the measured data assuming that the chosen model can fully reproduce the actual physical response. However, two significant sources of error make the estimation uncertain: random error from experiments and structural bias error that describes the discrepancy between the model and actual physical phenomena. Generally, these two error sources are not evaluated separately. As a result, the suitability of selected models to correctly infer parameters from TRTs are not well understood. In this study, the Bayesian calibration framework proposed by Kennedy and O'Hagan is employed to estimate the GSHP design parameters and quantify the random and structural errors in the inference. The calibration framework enables us to examine structural errors in the commonly used infinite line source model arising due to the conditions in which the TRT takes place. Two in situ TRT datasets were used: TRT1, influenced by contextual disturbances from the outdoor environment, and TRT2, influenced by a strong groundwater flow caused by heavy rainfall. We show that the Bayesian calibration framework is able to quantify the structural errors in the TRT interpretation and therefore can yield more accurate estimates of design parameters with full quantification of uncertainties
Genome Comparison and Phylogenetic Analysis of Orientia tsutsugamushi Strains
Orientia tsutsugamushi (OT) is an obligate intracellular bacterium belonging to the family Rickettsiaceae and is the causative agent of scrub typhus, or Tsutsugamushi disease. The complete genome sequences of two OT strains (Boryong and Ikeda) have recently been determined. In the present study, we performed a fine genome sequence comparison of these strains. Our results indicate that although the core gene set of the family Rickettsiaceae is highly conserved between the two strains, a common set of repetitive sequences have been explosively amplified in both genomes. These amplified repetitive sequences have induced extensive genome shuffling and duplications and deletions of many genes. On the basis of the results of the genome sequence comparison, we selected 11 housekeeping genes and carried out multilocus sequence analysis of OT strains using the nucleotide sequences of these genes. This analysis revealed for the first time the phylogenetic relationships of representative OT strains. Furthermore, the results suggest the presence of an OT lineage with higher potential for virulence, which may explain the clinical and epidemiological differences between ‘classic’ and ‘new’ types of Tsutsugamushi disease in Japan
Genome-Wide Survey and Expression Analysis of the Plant-Specific NAC Transcription Factor Family in Soybean During Development and Dehydration Stress
Plant-specific NAC transcription factors (TFs) play important roles in regulating diverse biological processes, including development, senescence, growth, cell division and responses to environmental stress stimuli. Within the soybean genome, we identified 152 full-length GmNAC TFs, including 11 membrane-bound members. In silico analysis of the GmNACs, together with their Arabidopsis and rice counterparts, revealed similar NAC architecture. Next, we explored the soybean Affymetrix array and Illumina transcriptome sequence data to analyse tissue-specific expression profiles of GmNAC genes. Phylogenetic analysis using stress-related NAC TFs from Arabidopsis and rice as seeding sequences identified 58 of the 152 GmNACs as putative stress-responsive genes, including eight previously reported dehydration-responsive GmNACs. We could design gene-specific primers for quantitative real-time PCR verification of 38 out of 50 newly predicted stress-related genes. Twenty-five and six GmNACs were found to be induced and repressed 2-fold or more, respectively, in soybean roots and/or shoots in response to dehydration. GmNAC085, whose amino acid sequence was 39%; identical to that of well-known SNAC1/ONAC2, was the most induced gene upon dehydration, showing 390-fold and 20-fold induction in shoots and roots, respectively. Our systematic analysis has identified excellent tissue-specific and/or dehydration-responsive candidate GmNAC genes for in-depth characterization and future development of improved drought-tolerant transgenic soybeans
Complete Genome Sequence and Comparative Analysis of the Wild-type Commensal Escherichia coli Strain SE11 Isolated from a Healthy Adult
We sequenced and analyzed the genome of a commensal Escherichia coli (E. coli) strain SE11 (O152:H28) recently isolated from feces of a healthy adult and classified into E. coli phylogenetic group B1. SE11 harbored a 4.8 Mb chromosome encoding 4679 protein-coding genes and six plasmids encoding 323 protein-coding genes. None of the SE11 genes had sequence similarity to known genes encoding phage- and plasmid-borne virulence factors found in pathogenic E. coli strains. The comparative genome analysis with the laboratory strain K-12 MG1655 identified 62 poorly conserved genes between these two non-pathogenic strains and 1186 genes absent in MG1655. These genes in SE11 were mostly encoded in large insertion regions on the chromosome or in the plasmids, and were notably abundant in genes of fimbriae and autotransporters, which are cell surface appendages that largely contribute to the adherence ability of bacteria to host cells and bacterial conjugation. These data suggest that SE11 may have evolved to acquire and accumulate the functions advantageous for stable colonization of intestinal cells, and that the adhesion-associated functions are important for the commensality of E. coli in human gut habitat
Recommended from our members
Phase-matched multi-layer based polarisation-independent spot-size converter for silicon nanowire
The efficient coupling of optical power from a silicon nanowire (NW) to an optical fibre is challenging for both the quasi-TE and quasi-TM polarisations. Here, we propose a polarisation-independent spot-size converter (PI-SSC) based on phase-matched multi-layer waveguides for efficient coupling between a silicon NW and an optical fibre for both the polarisations. The fabrication process of the proposed PI-SSC is compatible with the complementary metal-oxide-semiconductor (CMOS) process. The optimisation for the proposed PI-SSC is studied by using a numerically efficient algorithm, combining a rigorous H-field based full-vectorial finite element method (VFEM) and the least squares boundary residual (LSBR) method. The simulation results show that using an eleven-layer based PI-SSC, the coupling losses between a silicon NW and a lensed fibre of radius 2 μm can be reduced to only 0.34 dB and 0.25 dB for the quasi-TE and quasi-TM polarisations, respectively. Furthermore, the output multi-layer is horizontally tapered, which further reduces the coupling loss for both the polarisations and the end face is easy to be polished
Recommended from our members
Initial results from Phase 2 of the international urban energy balance model comparison
Urban land surface schemes have been developed to model the distinct features of the urban surface and the associated energy exchange processes. These models have been developed for a range of purposes and make different assumptions related to the inclusion and representation of the relevant processes. Here, the first results of Phase 2 from an international comparison project to evaluate 32 urban land surface schemes are presented. This is the first large-scale systematic evaluation of these models. In four stages, participants were given increasingly detailed information about an urban site for which urban fluxes were directly observed. At each stage, each group returned their models' calculated surface energy balance fluxes. Wide variations are evident in the performance of the models for individual fluxes. No individual model performs best for all fluxes. Providing additional information about the surface generally results in better performance. However, there is clear evidence that poor choice of parameter values can cause a large drop in performance for models that otherwise perform well. As many models do not perform well across all fluxes, there is need for caution in their application, and users should be aware of the implications for applications and decision making
- …