2,396 research outputs found

    Modern regional development in Japan

    Get PDF
    Although modern Japanese cities are the products of an urban planning system, this system is itself rooted in the histories of towns and provincial areas, that had previously grown in the context of local economic needs and resources. However, in the early stages of urbanisation, the new infrastructure derived from the West did not necessarily complement the existing local urban environment. This was eventually reconciled by a series of infrastructure development projects, which were presented to local city planners for feedback. This study focuses on a typical example of this process in Gifu, Japan; it presents a description of the steps by which the region was gradually modernised by means of a river improvement project that led to the implementation of urban planning

    Classification of Stabilometric Time-Series Using an Adaptive Fuzzy Inference Neural Network System

    Full text link
    Stabilometry is a branch of medicine that studies balance-related human functions. The analysis of stabilometric-generated time series can be very useful to the diagnosis and treatment balance-related dysfunctions such as dizziness. In stabilometry, the key nuggets of information in a time series signal are concentrated within definite time periods known as events. In this study, a feature extraction scheme has been developed to identify and characterise the events. The proposed scheme utilises a statistical method that goes through the whole time series from the start to the end, looking for the conditions that define events, according to the experts¿ criteria. Based on these extracted features, an Adaptive Fuzzy Inference Neural Network (AFINN) has been applied for the classification of stabilometric signals. The experimental results validated the proposed methodology

    Радянська естетика як окрема міфологічна складова тоталітарної пропаганди (Soviet Aesthetics as a Separate Component of Mythological Totalitarian Propaganda)

    Get PDF
    У статті проаналізовано основоположні засади становлення радянської естетики в період тоталітаризму. На прикладах артефактів радянської культури продемонстровано основні трансформації, що їх зазнали основні естетичні категорії. Виокремлені основні системоутворюючі категорії радянської естетики. Досліджено вплив естетики на формування ідентифікації окремої людини, проходження нею певних етапів соціалізації, становлення її як особистості. Встановлене ідеологічне значення естетики, як засобу маніпулювання колективним несвідомим, через пропагандистські образи та символи. (The article analyzes the features of aesthetics formation during the totalitarian regime in the territory of the USSR. The basic aesthetic categories were characterized, their historical transformation was studied. The additional principles of formation of aesthetic discourse, which is served by totalitarian propaganda, were estableshed. The examples of artifacts of Soviet culture demonstrated the major changes and transformations, that took place in the main aesthetic categories. The category of heroic as totalitarian aesthetic innovations in space was considered. The analysis of Soviet culture through metanarrative principle was applied. Established, that Soviet propaganda, through aesthetics successfully produced the new meanings and endowed them cultural space, depending on the purpose of the official doctrine. The leading causes and consequences of social indoctrination were outlined. It means that ideological message is transmitted throughout aesthetic images and symbols, which is fixed at the subconscious level, in turn, leads to the manipulation of large populations through manipulation of the collective unconscious. The influence on the formation of aesthetics identification of a person, passing it certain stages of socialization, the formation of personality was proved.

    Dynamical superfluid response of 4He confined in a nanometer-size channel

    Get PDF
    We have studied the superfluid response of liquid 4He confined in a one-dimensional nanometer-size channel by means of a twofold torsional oscillator at 2000 and 500 Hz. For the lower-frequency mode, both the superfluid onset and the dissipation peak shift to the low-temperature side by 40 mK under 0.13 MPa, and the shift is slightly enhanced by the application of pressure. The strong frequency dependence indicates that the superfluid response is a dynamical phenomenon. Furthermore, this dependence is consistent with the theoretical prediction based on the Tomonaga-Luttinger liquid model

    1次元ナノ多孔体中4Heの超流動と比熱

    Get PDF
     低次元系の液体4He の超流動の振舞いは物性物理の大きな興味のひとつである.最近,細孔径がおよそ3 nm の1次元細孔に閉じ込めた擬1次元系の液体4He の超流動密度と熱容量が観測された.その結果,転移温度はバルク液体4He の転移温度から大きく低下し,また機械的応答に対して大きな散逸ピークを伴うことが報告された. また,細孔中液体4He の熱容量は,バルクより低温でブロードな異常があることがわかった. 本研究の目的は,1次元細孔中液体4He に関して(1) 特徴的な散逸ピークを伴う超流動転移の性質を明らかにすること,(2) 細孔中の液体4He の熱容量について細孔径依存性を明らかにすること,である.具体的には(1)については,散逸ピークの測定周波数依存性を調べた.研究では, ①細孔径3 nm の細孔内に吸着薄膜から加圧下液体4He に至るまで, ②加圧下液体4He, ③微量な3He を導入した3He-4He 混合液体についての3 つの実験条件で測定を行った.(2) については,細孔径3 nm より小さい細孔径2 nm の1次元細孔に閉じ込めた液体4He の熱容量測定を行った.本論文は7章からなる. 第1 章では,本研究に先立ち制限空間中4He の研究の必要性について述べる.特に,1 次元ナノ多孔体中4He の超流動と比熱は,低次元系の物性の理解に大きく貢献すると考えられ重要である. 第2 章では,本研究に関連する先行研究を紹介する.まず,バルク4He の一般的性質と超流動と比熱について説明する.次に,制限空間に閉じこめた4He の研究を紹介する.多孔質ガラス中4He の超流動はバルクよりも低温に抑制され,その抑制の大きさは細孔径に依存することが報告されている.多孔質ガラスの特徴は,3次元ネットワークを持つこと,細孔径に分布があることである.最後に,1次元ナノ多孔体中ヘリウムの先行研究を述べる.最近,細孔径分布が小さく細孔間の接続がない1次元細孔FSM 中4He の超流動が観測され,その理論研究も報告されている. 第3 章では,前半に本研究で用いる1次元細孔FSM について述べる.本研究では,細孔径の異なる試料を用いる.2つの試料に対し,窒素吸着圧力測定を行った結果より,細孔径が異なることを確認し,BET 法を用いた解析により表面積評価を行った.後半では,超流動密度測定に用いた2重連成ねじれ振り子法と熱容量測定法を説明する.ねじれ振り子はロッドとおもりで構成され,ロッドのねじれ振動に共振周波数をもつ.おもり内部に4He があると,超流動密度変化は共振周波数変化として観測される.本研究では,ロッドと実験セルを兼ねたおもりの中間にダミーのおもりを配置することで,2 つの共振周波数をもつ2 重連成ねじれ振り子を用いた.また,熱容量測定セルにはヒーターと温度計を取り付け,熱パルスの緩和を計測することで精密に熱容量を測定した.セルは極低温下で液体4He の圧力を計測する機構も備えている. 第4 章では,細孔径3 nm の1次元細孔FSM での純粋な4He の超流動密度の測定結果を説明し,議論する.章前半では,加圧下の液体4He について説明した.加圧下の液体4He の散逸ピークは測定周波数が低周波では低温へ移動すること,高圧では周波数依存が大きくなること明らかになった.後半では細孔内の低密度4He について説明した.4He ははじめ細孔壁面に吸着し,ある導入量では円筒状の薄膜液体が形成されると考えられる.さらに4He を導入すると,薄膜から細孔内が液体で満たされ,最終的には飽和蒸気圧下の液体4He で細孔内が満たされる.測定の結果,円筒状の薄膜液体と考えられる条件でも,加圧下液体で満たされた条件と同様の超流動応答が観測された.また,飽和蒸気圧下より低密度の液体でも周波数依存あることがわかり,依存の大きさは加圧下液体よりも小さいことが明らかになった.これらの測定結果についてTomonaga-Luttinger(TL) 模型に基づく理論研究と比較した. 第5 章では,細孔径3 nmの1次元細孔FSM中に微量な3He を導入した3He-4He混合液体の超流動応答と測定結果測定結果を説明し,議論する.3He 濃度が2 at%,4 at% の混合液体と純粋な4He について,超流動の観測される温度と周波数依存の大きさを比較した.超流動は3He 濃度に比例して低温へ移動し,移動量はバルク液体や他の多孔質ガラスの実験結果と同程度であることが明らかになった.また,周波数依存の3He 濃度による差異は観測されなかった.これらの測定結果についてTL 模型に基づく理論研究と比較した. 第6 章では,細孔径2 nm の1次元細孔FSM の液体4He の熱容量の測定結果を説明し,議論する.セル内には細孔外に_mからnm オーダーの様々なサイズの空間が存在することがわかった.細孔内4He の熱容量の異常を観測し,細孔径3 nmの異常温度より低温であることを明らかにした.また,細孔径2 nm の異常温度では超流動密度の立ち上がりがあることがわかり,臨界指数はバルク4He や多孔質ガラス中4He とは異なることが明らかになった. 以上から,1次元細孔中の4He の超流動応答は観測周波数に依存しバルクとは異なる機構であり,2次元薄膜4He の超流動と比較して,細孔径3 nm の1次元細孔中超流動応答の観測周波数は一桁程度大きく,細孔中超流動応答は1元系特有の振舞である可能性がある. 第7 章を全体のまとめとした.電気通信大学201

    Relationship among gait parameters while walking with varying loads

    Get PDF
    金沢大学人間社会研究域人間科学系金沢大学自然科学研究科 生命科学専攻This study aimed to clarify the relationships between loads and gait changes and among gait parameters while walking with various loads. Fifteen healthy young male adults (mean age: 22.1±1.6 years) walked with four kinds of loads based on each subject\u27s body mass (0, 20, 40, and 60% of body mass: BM) on his back. Walking speed, cadence, stance time, swing time, double support time, step length, step width, walking angle, and toe angle were selected as gait parameters. Walking speed, cadence, stance time, and double support time changed significantly with loads. The walking speed showed significant correlations with the swing time at 0% BM (r=−0.64) and the walking angle at 60% BM (r=−0.52). Significant correlations were found between swing time and double support time at 0, 20, and 40% BM (r=0.53–0.63) and between walking speed and step length at 40 and 60% BM (r=−0.61, −0.67). In conclusion, walking with loads produces large gait changes. The relationship between swing time, double support time, and walking speed, as well as between walking angle, step length, and walking speed changes greatly with loads. These changes may occur in order to maintain a stable posture
    corecore